AutoCAD Civil 3D :: Vertical Curve For Pipe Network?

Sep 1, 2011

I want to draw a water pipe network and i wanted to be 1.6 meter under the ground level. How to mange this my pipe network is PE material. I try to copy the profile and offset to -1,6 but i want to use the option of create pipe network and produce it in the profile view but how can i make the network follow the ground level profile ????

I need to add vertical curve to the network or something similar? Can i divide the pipes in the profile view by adding the structures direct to profile view.

View 9 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Default Pipe Network Layer (Not The Structures Or Pipes The Network)

Dec 7, 2012

I am using Civil 3D 2013. I work in an office where we have a few different flavors of Autocad (LT, MEP, regular vanilla AutoCAD etc...) and versions (2010 LT, 2011, 2012, 2013).

For the most part there isn't much inter-office drawing coordinate that has to happen, but there is the occasional project where multiple disciplines (Structural, Mechanical and Civil Site) have to share drawings.

The specific problem I am having is when I share my 2013 Civil 3D drawing with a user using 2011 MEP. He gets the typical rectangle for the proxy objects (in my case, my pipe networks for sanitary and storm drain). We've tried downloading and installing various object enablers, but there doesn't seem to be one for a 2013 to 2011 scenario. So I setup my parts to be on layers that he can just turn off. HOWEVER... the actual pipe network (not the structures, parts, labels etc... the network itself) ends up on layer 0. For this specific project, I do the old (ssget "x" '((8 . "0")) search to select all objects on layer 0, add those objects to a selection set (pselect), then in my modify objects dialog I filter for pipe networks, then change the layer to something other then 0.

While this is a workaround that works for me, what I really want to know is if there is a way that I can change the default layer that the network (again, not pipes, structures or text, the actual network) so I don't have to use the workaround. Any thoughts?

P.S. It's killing me that I had to create a new Autodesk login and now all my AutoCAD "street cred" is lost

"The source of expertise is not in the memorization of the minute details of a subject but in the thorough understanding of the fundamental concepts on which it is based."

View 9 Replies View Related

AutoCAD Civil 3D :: Pipe Network Storm Sewer Pipe Plan View

Nov 20, 2013

Pipe network storm pipes: Fairly new to Civil3D and trying to set up parts list for the storm sewer pipe and would like the plan view to appear as it does currently.  We use a polyline for centerline of pipe, similar to dashed linetype but line and space are the same, width set to pipe width.

View 1 Replies View Related

AutoCAD Civil 3D :: Edit Pipe Network - How To Trim Pipe That Pass Through Manhole

Sep 25, 2012

I created pipe network for my storm drain project. I have located all the structures (manhole) to all angle point of my alignment as required. Also I "insert" manhole every 400' per local code requirements using the command "network layout tools; structures only. My problem is I couldn't find the tools how to trim the pipe that pass through the manhole. Please see attached pdf file.

View 1 Replies View Related

AutoCAD Civil 3D :: Connecting Pipe To Different Pipe Network Structure

Jun 20, 2012

Using Network Layout Tools, can you attach a pipe to a structure in a different Pipe Network? 2013 Civil 3D

View 6 Replies View Related

AutoCAD Civil 3D :: Pressure Network - Tee And Vertical Bend

Nov 2, 2013

I am trying to add a 20"x6" tee to a 20" force main pressure pipe network and Civil 3D simply refuses to do it. It will cut the pipe, but won't add the tee in plan edit. When I try to add a tee to the end of a pipe, it doesn't show up. I can, however, add a 24"x6" tee to my 20" di pipe, which of course doesn't even make sense.

Also, I am having a problem with vertical bends in profile drawing correctly. It works fine when the profile is running left to right, but where I have to reverse the profile they cross over onto themselves (see attached png).

I find myself spending more time fiddling with the pressure network tool than it would take to just draw it manually.

View 2 Replies View Related

AutoCAD Civil 3D :: Vertical Curve (r) Value

Jun 21, 2013

I need to add the "r" value to the vertical curve labels in the profile (|G2-G1| / L).

Is there a way to add this property to the text component editor?  I see a lot of different components listed, but no "r" value.

View 5 Replies View Related

AutoCAD Civil 3D :: Vertical Curve Labels

Apr 8, 2012

I am having a lot of problems with my vertical curve labels. I created a style that shows the length of the vertical curve, the k-value, the end and start elevations, and the elevation and station of the PVI, as shown. My problems are the fact that when I want to flip a label, they all flip (shown in the second picture). I also have noticed that there is only one drag point. Is this a setting that I unknowingly edited, or is it possible to flip labels individually?

View 9 Replies View Related

AutoCAD Civil 3D :: Adding PVI With Vertical Curve?

Oct 14, 2010

In this moment I am trying to add to my profile line a PVI -which I know how to do it- with the capability of modify the criteria for the vertical curve. In this moment every time that I add a PVI the tangents do not have a vertical curve and if I open the Panorama Profile Grade View Window it does not allow me to change either the length or radius so their values in these cells are empty.

How is possible then to edit -create- the vertical curve for a PVI that was not created in the first shoot?

View 5 Replies View Related

AutoCAD Civil 3D :: Pipe Network Labels

Mar 22, 2012

I have multiple profile views with a pipe network. In a number of cases, I have a pipe that extends to the end of one profile view and continues on the next. I can label the pipe on one profile but not on the other. Is there a way to add two labels to the same pipe - one label on one profile view and another label on the other profile?

View 2 Replies View Related

AutoCAD Civil 3D :: Pipe Network Not Showing Up?

Apr 10, 2013

I have lost the ability to create a pipe network in a single drawing. Sorta. I can create a pipe network, and label it, and see it in my toolspace, but it won't display it for any style in any format. I can bring in a data reference and label those, but can not see pipe or structure outlines or anything to that end. I have tried to recover, audit, purge. I am at the end, currently creating the pipe network, data referencing it in, and then just drawing lines between the labels.

View 9 Replies View Related

AutoCAD Civil 3D :: Pressure Pipe Network

Jan 16, 2013

I have created a pressure pipe network (Plan view) from own created pipes and fittings, try to create an alignment from the network but C3D tells me that the selected network part has no connected parts?

How would I connect the network in order to create an alignment? (the pipe network has got a command to do that)

View 2 Replies View Related

AutoCAD Civil 3D :: Pipe Network Labeling

Jun 11, 2013

I have a drainage model, the data for which has been imported from microdrainage into Civil3d (.sws file) .

The engineer working on the project is playing around with the Invert and Cover levels so I reload the same updated .sws file into my model almost daily expecting the information shown in the labels of the pipes and manholes to simply change. Instead mine seem to disappear and I have to relabel the whole network again.

This wouldn't be much of a problem because labeling only takes a few minutes but with this particular scheme, the client wants the labels shown in a box with a leader. When I relabel, the boxes automatically snap to the center of the manholes without a leader and i then have to drag each one away from the manhole to get the leader to show up.

View 7 Replies View Related

AutoCAD Civil 3D :: Station Labels On Vertical Curve

Oct 23, 2012

I have two different label styles set up under Profile > Label Styles > Major Station.

I would like to have one of these labels applied to tangents in my profile and a the other one to curves.

View 9 Replies View Related

AutoCAD Civil 3D :: PVI Remains After Creating Vertical Curve

May 16, 2013

I have a profile view of a street surface which transitions from a 2.75% grade to -0.52%. I would like to add a vertical curve so I can add a label at the high point of the street. However when I create my vertical curve, the original PVI is still there and the surface uses the PVI's elevation rather than the vertical curve's.

How can I get the PVI to either go away or have the surface read the vertical curve below the PVI?

View 5 Replies View Related

AutoCAD Civil 3D :: Vertical Circular Curve On Profile

Nov 12, 2012

Seems like a bug on Autocad Civil 3D 2013. I followed all the tutorials to design a circular vertical curve on a profile and it just dont work. I put circular on settings, click on circular curve by PVI button, the software even ask the radius and it end up designing a parabolic curve.

View 2 Replies View Related

AutoCAD Civil 3D :: Vertical Curve Labels On Profile?

Jan 11, 2013

I just created a profile by choosing my PVIs and linking them together with tangent curves.  How do I add labels to show the vertical curve properties (K value, curve length, station of PVI, elevation of PVI...)?  I'm guessing I have to edit the label style? 

View 2 Replies View Related

AutoCAD Civil 3D :: Reverse Vertical Curve Label?

May 9, 2012

handle a PRVC label? Right now I have the PVC and PVT labels on top of each other. Is there a nice solutioon other than making a new label style?

Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0

View 2 Replies View Related

AutoCAD Civil 3D :: How Length Of Vertical Curve Is Calculated

Jul 28, 2013

How the length of the vertical curve is calculated in the C3D?

I’m wondering regarding the equation used to calculate the length of the vertical curve.

Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.

View 9 Replies View Related

AutoCAD Civil 3D :: Add Vertical Curve Between New Profile And Existing One?

Dec 17, 2013

I am working on a corridor. I have a proposal profile, and now i wanted to add a vertial curve between the new profile and exsiting. (see attached.) but i have not done before.

View 4 Replies View Related

AutoCAD Civil 3D :: Pipe Network NOT Applying Rules

Dec 5, 2012

I'm creating a utility template.  Earlier in the day, I'm able to assign pipe and structure rules to a network and create the network based on these rules.  Within the past 30 minutes, however, it completely ignores the pipe and structure rules while creating the network.

I make sure there is a surface assigned to the network.  I make sure the pipe rules are set correctly in the parts list.  I'm using no null structures.  NOTHING HAS CHANGED EXCEPT THE POSITION OF THE MINUTE AND HOUR HANDS ON THE CLOCK! It's like the Civil 3D went out to lunch and forgot to tell me that it's going to lunch.

-Civil 3D 2012
-intel Core i7 2.4 GHz
-8 GB of RAM
Windows 7 64-bit
Fred
-Civil 3D 2013 sp2
-Windows 7 64-bit
-Intel i7 Dual Core with 2.40 GHz
-8 GB of RAM
-AMD Radeon HD 6770M
-Civil 3D user since 2007

View 1 Replies View Related

AutoCAD Civil 3D :: Pipe Network Parts Not Visible

Nov 27, 2012

I have a user having an issue with drawing pipe networks. When they draw the pipe, the structure is not visible. A label shows up, and the structure can be found in the prospector, but is not editable in the plan view (see attached image).

I have a feeling it may be an issue with our pipe networks parts list and pipe catalog location. We have found an issue with our install that defaluts our pipes catalog to our local drives, but our parts list were created using a network drive. Several users have had an issue creating pipe networks when this has happened. However once we switched the pipe catalog to the netowrk drive the issue was resolved.

When we changed the pipe catalog location, it did not resolve the issues.FYI - I have tried the basics (layers on/thawed, pipe structure style layers on/thawed, audit and purge).We are using Civil 3D '09.

View 2 Replies View Related

AutoCAD Civil 3D :: Pipe Network Fatal Error

May 22, 2012

We are having trouble with one of our C3D 2013 seats crashing (giving a fatal error) when trying to edit or do anything with a pipe network. The drawings work fine on other computers. I am trying to keep from having to remove and reinstall the software.

View 5 Replies View Related

AutoCAD Civil 3D :: Insert Structure In Pipe Network?

Dec 14, 2013

I am working on an existing Pipe Network.  I have a location where I have already placed a pipe and filled in the correct parameters for this pipe.  But I realize now that there is a concrete headwall near the end of the pipe.  So I was trying to insert the structure at the midpoint of a line I have created for OSNAP reasons so it would create the structure at the specified location.  The problem is when I move the structure to create at this location, the "Break Pipe Marker" goes away and only shows when I am at a different location along the pipe.  So I wanted to see if there was a command or feature to use to tell the software I want to place this structure at a specified location along this one section of pipe. 

I wanted to see what my options were.  I know I can grab one end of the pipe and move it to the location and then add the structure and pipe from there.  But I did this insertion under different circumstances and it broke the pipe into 2 sections while still keeping the same and adding a (1) after it, which is pretty useful when reading printouts and showing that this is actually one pipe instead of 2 pipes.

C3D 2014 SP1
DELL Precision T3600
Intel Xeon E5-1650 @ 3.20GHz
NVIDIA QUADRO 4000 Dual Monitor
32 GB RAM / Win7 Pro 64-bit

View 7 Replies View Related

AutoCAD Civil 3D :: How To Add Open Ditches To The Pipe Network

Oct 1, 2013

I can design a network of open ditches and pipes in Storm and Sanitary Analyzes to handle the flows required but when I export them back into Civil 3D the open ditches disappears. How do I add open ditches to the pipe network?

View 1 Replies View Related

AutoCAD Civil 3D :: SUDAS Pipe Network Catalog

Oct 11, 2013

Is it possible to get a Pipe Network Catalog for SUDAS specifications?? 

View 3 Replies View Related

AutoCAD Civil 3D :: Pipe Network Won't Show Up In Profile?

May 15, 2012

I am using civil 3d 2012. 

I have a network that I showed in a profile view and, to creat my proposed pipes network I simply copied the pipes and structures and used network split.

Now I have two networks, but when I project those pipes and structures into a profile they are not visible. 

If I check the profile view properties and look at the pipe networks tab, all the pipes are shown as drawn.

View 7 Replies View Related

AutoCAD Civil 3D :: Pipe Network Data Shortcuts?

Jul 24, 2012

i am currently using civil 3d 2012. I am having issues with pipe networks and my data shortcuts. when i data shortcut a pipe network into another file, sometimes my structures just disappear after saving and closing out, then reopening - like they were never there.

View 4 Replies View Related

AutoCAD Civil 3D :: Pipe Network Data Shortcut

Jul 9, 2012

I have run into a problem with my Pipe Network data shortcut.  When I am in a drawing that is referencing my Pipe Network not all of my structures are showing up.  I confirmed this by going to the prospector tab/pipe networks/storm/structures.  According to the list It is obvious that not all of my network structures are making it to the new drawing.  I've double and triple checked the source drawing to make sure that all the structures actually exist and they do.

I've deleted the data shortcut and recreated it and still nothing. 

View 8 Replies View Related

AutoCAD Civil 3D :: Create Pipe Network From Object

Sep 11, 2012

I have an alignment that I want to create a pipe network from using the "Create pipe network from object" command. I am able to create the pipe network, but it only places a structure at the beginning of the alignment. How do I get it to create structures at all of the vertices?

View 2 Replies View Related

AutoCAD Civil 3D :: Importing Storm In Pipe Network?

Feb 8, 2013

is there a way to get the drop down highlighted below to give me storm and sanitary instead of just "standard".

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved