Illustrator :: Phantom Line Around Stacked Objects
Mar 16, 2014
Whenever two shapes are stacked directly over top of one another there seems to be a phantom line at the edge of the top shape. At first i thought it was a way to indicate to the user that there are two shapes stack agansit one another. but when I export the graphic as an image, the phantom line is included. This is also the case when using a clipping mask. (image example below)
A few work around that I've used are exporting the file with Art Optimized (Super Sampling) selected in the Anti Aliasing setting. Also, manually creating a sort of ink trap around the bottom shape so that it doesn't reach the edge of the shape above it. Sometimes this becomes a painstaking task when dealing with complicated objects.
As a designer who works with screen printing i'm weary about sending the production file to the printer because of the possibility that they will not understand this glitch/setting and i'll end up with phtanom lines around objects when printed.
View 2 Replies
ADVERTISEMENT
Jun 16, 2012
A friend asked, and I had no answer - what am I missing here? .ai file
View 6 Replies
View Related
Feb 9, 2012
I am attempting to use VBA in Acad 2007 to renumber a series of text objects based on their relative positions. (The text is numerals only.) The programs works well at first, but if I erase some of the text objects, it crashes. I noticed that if I start with 20 text objects in the drawing, and then erase 1, AutoCad reports 19 objects selected while ssetObj.Count is still equal to 20. Apparently the erased objects are still being returned by ssetObj.SelectOnScreen. To make sure I ran the example from a new drawing with only the text objects.
View 5 Replies
View Related
Aug 15, 2011
It's just supposed to be a plain black logo, which I've extracted from an image and smoothed/sharpened the edges (they were very rough even before the extraction process). But somehow I've introduced this faint ghost line about 1mm in from the edges of the logo, and I can't get rid of them even if I draw over the entire logo with jet black.
The ghost line becomes most apparent when I anchor the transparency to a white background. Here is zoomed segment of the logo demonstrating the issue:
There is none of this effect on my original full size transparency. It must happen during during the smooth process. Process I used:
- Alpha to selection
- Shrink by a few mm
- invert
- gaussian blur
- colour->curves-> and resharpen smoothed/blurred edges using the 'alpha' graph
View 2 Replies
View Related
May 23, 2011
I have a phantom line showing up when I plot this particular drawing. When I plot this drawing, do a preview or plot to a pdf, I'm getting a phantom diagonal line going across the drawing. There is no object there in model space or paper space!!! I havn't left on any hidden/locked layers etc. I'm not doing anything I don't normally do with drawings like this. It's just a topographic map of a residence with a surface. I've purged, audited, recovered, even started a new drawing and inserted the componets and nothing fixes this. I feel like throwing my computer out the window and applying at Wal-mart.
View 7 Replies
View Related
Sep 13, 2007
Since switching to 2007 our company logo, a png image, plots with a line down the right side the image. It does not show up in plot preview or when plotting to pdf or dwf. I have set image frame to 0 and 2 with no change.
View 4 Replies
View Related
Jul 9, 2010
When using RomanS, how do you stack fractions in single line text? AutoCad will do it automatically in multiline text but I am having trouble in single line text.
View 5 Replies
View Related
Jul 5, 2012
How do I set it so that when I type fractions in a text box it automatically keeps them as non-stacked fractions rather than horizontally or diagonally stacked?
View 2 Replies
View Related
Oct 30, 2012
I have 3 rectangles all stacked up. I just want to select the top 2, how can I do that?
In general, how do I select certain *multiple* shapes if they are all stacked? I know how to select them one by one.
View 4 Replies
View Related
Sep 24, 2013
Is there a way (plugin?) to add values on top of Illustrator Stacked Bar Graph? In the picture attached the numbers on top of the chart color areas are inserted manually. In powerpoint those can be added automatically.
View 2 Replies
View Related
Mar 23, 2013
Being new to AI, I find that as I draw paths, sometimes I would like to view them without all the anchors and handles, etc. So far, I've been doing this by clicking the 'deselect' option. Is there a faster way to do this, some sort of shortcut perhaps?
View 1 Replies
View Related
Jun 6, 2013
Is it possible to attach the vertices of a line to the centres of various objects so when I move the objects the line vertex attached to that object's center moves with it?
And what is a vertex called in Illustrator? It seems I'm using the wrong name for vertices.
View 11 Replies
View Related
Jun 25, 2013
Here's a screen shot to show what I mean. I tried to create this smaller box off of the anchor point of the larger box.
Currently usuing AI CS6 on a mac running osx 10.6.8
View 4 Replies
View Related
Mar 14, 2013
I am trying to get any stacked text in my illustrator file that is a single frames such as with carriage returns such as:
1
2
3
4
5
to be individual text frames.
Is there a split command I can use?
Im thinking it would start by finding all the textframes that have carriage returns is the carriage return identified as " "
View 5 Replies
View Related
Nov 14, 2013
I know we all feel the difficulty in how ancient the graph / table tool in Illustrator is.
But, is there a way to display Data Labels on the front of my stacked bar chart?
See attached image - this is what I want to achieve.
View 2 Replies
View Related
Sep 11, 2008
Is there any command within Photoshop to tell it to open all windows within the main window (or bring all open windows to the main window)? If you have dual monitors, then often a new window (say the save jpg quality dialog box, or the layers window, etc) will open in the other screen - that is, the screen in which you do not have Photoshop currently open.
This is not too much of a hassle, unless you have disconnected one of the monitors and the window opens up in that phantom monitor. Then you have no way to get to it. I usually resolve this by reconnecting the monitor.
But in this case that hasn't worked. When I choose "Image -> Canvas Size" the window opens somewhere, but I can't find it. I've moved my external monitor into every position possible relative to my primary screen (through Windows display settings) and I can't find the canvas size window anywhere. Code:
View 9 Replies
View Related
Apr 26, 2012
I have a situatuion where I have some parts in an assembly that have been set to BOM Structure Phantom, (I didn't use Reference due tho the display issues with Reference parts in the idw. ie, portions not showing as hidden when they should) I need all parts that are set as Phantom to display in a different color in the idw. How I can assign the Phantom parts to a different layer? These are existing parts of the install and need to be displayed differently. Seems like Phantom would work best, if I could control the color of the display in the idw. I cannot do this line by line, since there will be many parts all the time!
View 1 Replies
View Related
Oct 4, 2013
I keep getting this Alert:"Fonts used in some text layers are not available for activation. You will need to replace these fonts before the layers can be used for vector based output."
However i went through all my text layers (everything unlocked) and changed them to a new active font. I used select-all to ensure i got any possible extra spaces or returns. Are there hidden characters im not seeing? There seem to be some traces of the font im trying to replace left behind that are causing this error, because when i reactivate that font, the problem ceases.
Also! After replacing the old font i have tried outputting a PDF and checking the document properties. The old font does not show in the list of fonts in use.
View 1 Replies
View Related
Jul 26, 2012
How does one remedy this Adobe error message? "Can't scale the objects. The requested transformation would make some objects too small to use." This one always gets me. I'll spend more time trying to find the object in question. This has happened in almost al versions, but this time it's CS5.
View 3 Replies
View Related
Jun 14, 2012
At one time I managed to divine a way of showing parts in an assembly drawing in phantom. This is characterized by the icon for the part in the browser changing to green colour. Being elderly, I have forgotten how I managed to do this.
View 8 Replies
View Related
Jul 22, 2013
Not sure what to categorize this as, throw it under another 2013 oddity.
We have a project that has some filled regions causing graphics issues. What happens is the plan elements around a filled region are being transposed onto the filled region causing a "ghosting" affect on the filled region. See attachment.
It is happening in both Arch and MEP and I've tested it with update 2 and update 3 installed. No changes with an audit either.
View 5 Replies
View Related
Jun 19, 2013
I'm having a problem with "phantom" lines appearing in PDF plots.
The Situation:
The firm I work for often uses Excel tables in Autocad LT 2013. I have learned through experience its better to use a linked table, but in this situation only paste special is an option due to time constraints.
Basically when we try to plot a DWG with tables specially pasted in the drawing space phantom lines appear.
But only when we try to convert to PDF. In the plot preview everything is fine, but when the PDF is created vertical lines appear in the tables on the actual PDF.
I've tried many different options to fix this but so far the only thing that has worked is, converting the DWG to a DWF and opening in Design Review. From there I plot to PDF and everything is fine, no lines appear.
In the DWG I have tried tweaking the Plot Quality for the "pasted" tables to no avail.
View 8 Replies
View Related
Apr 3, 2013
Any lisp routine that will remove "phantom parcels" in a drawing? They are the parcels many topics on this discussion forum have topics on, that can be selected but can't be deleted by any simple means.
The drawing is relatively new...with minimal objects in it. Just some Feature Lines and 3D Polylines. I have Sites in my drawing...but no parcels. Only thing in the sites are the feature lines. When I do a Q SELECT for the parcels it selects and highlights my feature lines, which is weird.
View 5 Replies
View Related
Apr 16, 2013
We are experiencing an almost virus-like situation with some of our dwg files. Massive file sizes that grow exponentially - even with very few entities and no xrefernces. Said files also have issues with copy-to-clipboard and paste from one dwg file to the next: objects do not paste, but dozens of sequentailly named phantom blocks are generated.
After doing some searching around we feel this is occurring when clients send us files exported from microstation.
Any patch or purge command that will fix this?
View 2 Replies
View Related
Sep 22, 2013
There are 3 elements there. the top of the clap board was placed before i started tryinbg to create the slanted dashes that are on the average clapboards. The white dash was skewed using Object > Transform > Shear. Then i attempted to rotate it to fit.
I need 4 of these skwed white squares / trapezoids on the top along with 4 to match on the top of the larger potion of the clapboard. I do not want to eye it as it will be a part of a logo.
What would be the best method to use?Is there a way to draw the 4 rectangles on top of a perfectly horizontal long black rectangle and skew the white dashes at the same time?Is there a way to skew based on the dimensions of the longer black rectangle?
View 1 Replies
View Related
Mar 24, 2014
I should be able to apply an effect to a line that has been made with the line tool. Why is this not working?I thought that maybe I might have disabled Effects somehow, but I can't think of anything.
View 9 Replies
View Related
Jun 25, 2012
I am using live paint to paint cartoon character illustrations. The artwork is brought into Illustrator CS3 and live traced. Then I convert it to a live paint group and use the paint bucket to fill. Everything looks fine no matter how much I zoom in. If I bring the AI file into Photoshop CS6 I can see a thin white line between the black line art and the fill. This is most noticeable where black meets black. I can also see this sometimes in file previews while browsing through files. If the white line cannot be seen in Illustrator is the file ok? I did just upgrade to CS6 if that would make a difference.
View 2 Replies
View Related
Oct 18, 2012
I must have pushed one or the other button but I don't know which one!
I use CS5 and have now a small arrow on my line segment tool (as shown in the picutres):
Ever since that when i click shift, it just allows me to draw vertical lines, rather than vertical or horizontal.
View 1 Replies
View Related
Dec 26, 2013
when I (try to ) use Pencil and Brush tools, (cross-hatching), some lines get erased/replaced by the lines drawn close to them. It must have something to do with the preferences, but I am not sure what to change/adjust.
View 2 Replies
View Related
Jun 7, 2011
Any good script that allows you to align multiple objects to a line? I've found the ALIGNIT.lsp, but it's not working in Autocad 2012.
It's like this:
I have a horizontal line. Above it, there are +200 objects. They are aligned in the right rotation already, but I just want to move all the objects lower line to my horizontal line.
View 6 Replies
View Related
May 22, 2013
How can I align objects which are in a curve to a straight line? I thought I already knew the answer to this but when I tried I could not get it done.
I have about 1000 objects that I need aligning in this way (see attached image).
align.jpg
View 3 Replies
View Related
