Since switching to 2007 our company logo, a png image, plots with a line down the right side the image. It does not show up in plot preview or when plotting to pdf or dwf. I have set image frame to 0 and 2 with no change.
View 4 RepliesMe and several other of our staff have an issue where lines not drawn appear in plots, We uses fully license AutoCAD 2010 software.(it happens with evry plotter device including PDF plotters)
View 7 Replies View RelatedI'm having a problem with "phantom" lines appearing in PDF plots.
The Situation:
The firm I work for often uses Excel tables in Autocad LT 2013. I have learned through experience its better to use a linked table, but in this situation only paste special is an option due to time constraints.
Basically when we try to plot a DWG with tables specially pasted in the drawing space phantom lines appear.
But only when we try to convert to PDF. In the plot preview everything is fine, but when the PDF is created vertical lines appear in the tables on the actual PDF.
I've tried many different options to fix this but so far the only thing that has worked is, converting the DWG to a DWF and opening in Design Review. From there I plot to PDF and everything is fine, no lines appear.
In the DWG I have tried tweaking the Plot Quality for the "pasted" tables to no avail.
I have two layers. One is set to red color, the other to blue color (using ctb). I have both layers defaulted to 1 mm line weight thickness. Blue is continuous and Red is dashed.
When printing the blue layer prints at the correct weight of 1mm, while the dashed red layer prints at a much smaller thickness. All line properties are set to default or bylayer (this is not being caused by the lines having individual special properties).
I have found that when I Publish, the drawing comes out shifted about 1/8" down and 1/8" left as compared to when I use Plot. Which of course is just enough to cut off the sheet border which is 1/2" from the paper edge. I am using the same Page Setup for both Publish and Plot, same drawing.
This is to an Oce TDS600, and it only happens with 15x21 paper size. All paper sizes are set to 0" border. Probably an Oce issue, but have any of you seen this before?
How do I plot to a raster image and get 300 dpi?
View 4 Replies View RelatedI'm referencing in a WMS image (a momochrome LiDAR image) which shows fine on the screen. However when I plot, the image won't -- all other aspects of the drawing come through. It's not on a non-printing layer. I've fiddled with RASTERPERCENT, RASTERTHRESHOLD, and the plotter properties (currently using a PDF plotter but I have tried others with no success) but can't get the image to come through. Adding to the frustration, other images on the same server (i.e. color aerial) come through and plot without issue. Why this particular image won't plot? According to the WMS administrator, there is nothing on their end that "locks" the image prevening it from plotting.
View 3 Replies View RelatedIs there a way to export to pdf so that the lines match closer to the original drawing? I've tried using different pdf drivers, using trueview, exporting to a larger paper size (which improved output, but still not good enough). I know there has got to be a setting to increase the rasterization quality but the obvious ones don't work.
The firest image is an example section of the exported pdf and the second image is what it looks like opened in autocad.
I have an issue with plotting line thickness, when I use the company setup using a d-size B&W.pc3 and mono chrome.ctb files, i can't seem to get the plotter to show line thickness. But using the same setup with a customer border, I can get the line thickness.
Also I not sure if this makes a difference, but the company plots from model space and where most of our customers use paper space.
I set up my line weights in layer properties. When I print in color, the line weights show up. When I print monochrome, the line weights are all the same size. I've messed with the LWT button but that doesn't seem to work either.
View 8 Replies View RelatedWe are facing the problem of some object/line missing while ploting/PDF for the Autocad 3d drawing.
We also tried for "HIDEPRECISION=1" command , even then not displaying it.
Then we use "OBSCUREDLTYPE=1" then the missing object display but other all lines get too dark in the same drawing .
For sample , I have attached one pdf , in which you can see the missing line and object marked with bluecolor box.
any other solution to display the missing object.
We are using :
Software : Autocad 2012-64Bit , NAviswork 2013 , Autoplant Piping V8i - SS4 version : 8.11.9.140 , MS-Office 2010 64 Bit.
Hardware : Workstation Dell Precision T3600
i would like to ask about plotting in autocad 2013. at the page set up i change my line weights and i put also the colour of each layer but the colours don't change when i create it in pdf and print the drawing and also the thcikness of the lines are not changed. what can i do?
View 9 Replies View RelatedWhy files received from different architects affect how my plot style prints? I'm using my set plotstyle but plots are almost too light to read. Layers are set to default line weights in both files. This printing problem happens in both model and paper space. Using AutoCAD 2012 standard.
View 8 Replies View RelatedI have a phantom line showing up when I plot this particular drawing. When I plot this drawing, do a preview or plot to a pdf, I'm getting a phantom diagonal line going across the drawing. There is no object there in model space or paper space!!! I havn't left on any hidden/locked layers etc. I'm not doing anything I don't normally do with drawings like this. It's just a topographic map of a residence with a surface. I've purged, audited, recovered, even started a new drawing and inserted the componets and nothing fixes this. I feel like throwing my computer out the window and applying at Wal-mart.
View 7 Replies View RelatedI'm using autocad 2000 and I have a problem printing & plotting. The print, plot preview only shows a section of the drawing. What settings do I need to change for the entire drawing to print for the paper size I need.
View 3 Replies View RelatedI have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
I work with use autocad 2012, and am trying to create a pdf of a plane containing several aerial photos. I have set ImageFrame to 0. And I use Export to Pdf from output tab. When it creates pdf, images have a gray border or white, so I can see the connection between them.
I have ensured that there is no space between the images. I export from a layout with rotated UCS. The images are Tiff format.
It's just supposed to be a plain black logo, which I've extracted from an image and smoothed/sharpened the edges (they were very rough even before the extraction process). But somehow I've introduced this faint ghost line about 1mm in from the edges of the logo, and I can't get rid of them even if I draw over the entire logo with jet black.
The ghost line becomes most apparent when I anchor the transparency to a white background. Here is zoomed segment of the logo demonstrating the issue:
There is none of this effect on my original full size transparency. It must happen during during the smooth process. Process I used:
- Alpha to selection
- Shrink by a few mm
- invert
- gaussian blur
- colour->curves-> and resharpen smoothed/blurred edges using the 'alpha' graph
Whenever two shapes are stacked directly over top of one another there seems to be a phantom line at the edge of the top shape. At first i thought it was a way to indicate to the user that there are two shapes stack agansit one another. but when I export the graphic as an image, the phantom line is included. This is also the case when using a clipping mask. (image example below)
A few work around that I've used are exporting the file with Art Optimized (Super Sampling) selected in the Anti Aliasing setting. Also, manually creating a sort of ink trap around the bottom shape so that it doesn't reach the edge of the shape above it. Sometimes this becomes a painstaking task when dealing with complicated objects.
As a designer who works with screen printing i'm weary about sending the production file to the printer because of the possibility that they will not understand this glitch/setting and i'll end up with phtanom lines around objects when printed.
When I try to plot the file from the layout the middle and right part of my xref'ed image comes out as a black box - the top, bottom and left edge are fine. As are the line-drawings from two other xref on top of the image. The problem accourse both when I try to a physical copy on our plotter and when I try to plot to a pdf.
I'm working in autoCAD 2013 for mac and the files I'm working on are located on a server.
Following instructions from Autodesk as to how to install the Raster driver for image exports I installed "plotters" for JPEG, TIFF, BMP and PNG. None of them work. When I try to one of them, the result is a blank file about 39KB in size.
View 1 Replies View RelatedI am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
Can users with a 64 bit computer share pc3's and pmp's with 32 bit users without adverse effects?
View 1 Replies View RelatedWhen I publish a drawing as a multipage DWFx (or PDF for that matter) with "Include Layer Information" selected, the Plot Stamp (Simple Date/Time and Text) comes out but on different layers on different layouts.
Example:
First Layout : Plotstamp resides on Layer 0
Second Layout: Plotstamp resides on Layer 3P
Third Layout: EQPT-VC
etc
Some general information:
Autodesk AutoCAD 2011 64bit
Autodesk DesignReview - 2012
Adobe Acrobat X Professional
Layer 0 Is thawed/plotable and on in all layouts, viewports all layers, viewports. It has at least one entity per layout
Is there anyway to rectify this and still use the built-in Plot Stamp?
So the firm I work at has AutoCAD 2000 and 2007. 2000 is installed on 5 out of the 7 computers, and 2007 installed on 6 of the 7 computers. 2 of the computers running just ACAD 2007 are Windows Vista, while all the other computers are Windows XP. We have an OCE TDS320 CAD Printer, an HP Wide Format Printer and a Panasonic 330 Copier/Fax/Printer. Our Problem is that When you try to plot an ACAD2007 drawing it will only plot it in color. This problem did not exist before 1/12/12.
When I select the Plot Style to print I select "monochrome.stb" which has always worked, now all of a sudden it doesnt. The only way i have found to fix this problem is to change my drawing to layer "0" which is white, so when it tries to print in color it will print black. Another Guy in the firm i work at has ACAD2007 on his computer running XP, he also has 2000 running on the same computer. When he tries to plot on ACAD2007 the same thing happens, so it is not isolated to my computer.
There is a difference though between his Plot Styles on his computer and the ones on mine. His end with .ctb, which works. It only doesnt work when he tries to print a drawing i made off of my computer. Because of this we copied his Plot Style folder for AutoCAD 2007 and installed it into the folder with all of my plot styles on my computer, replacing the ".stb" with ".ctb" That did not work at all. The last thing we tried was to copy over a file that plotted correctly, delete the drawing and draw what we needed, This also did not work. So basically we are thinking that ACAD2007 is not reading the Plot Styles correctly, or the Plot Styles are wrong or currupt.
I have several objects on various layers in model space and they are exposed through a viewport in a paperspace layout. I also have a corporate CTB plot style.
Here is my problem: If i plot the objects from model space, they all plot with the correct lineweights as defined in our corporate CTB, but when i plot them from the paperspace layout, some but not all objects plot with a heavier lineweight than what is defined in the CTB.
I thought the CTB was supposed to override any settings applied to individual objects, but more importantly, why the different results, on the same objects, depending upon the space from which they're plotted?
I recently upgraded from 2010 to 2012 and when trying to plot, using the very same page setups as before the upgrade, the quality (or resolution) of the plot is very poor and pixelated. I am using very high resolution aerial imagery. The output is not at all high resolution (totally pixelated, not presentable as professional). It seems like AutoCAD is reducing the image quality now. Is this a system variable that can be adjusted?
View 1 Replies View RelatedAutoCAD Architecture 2011
Windows 7 x64
8GB RAM
Created new PC3 for KIP 3100 plotter using its AutoCAD Heidi driver for Win7x64. Upon plot preview the following error occurs.
This causes a crash report which has been submitted to Autodesk. The response was to install service pack 2. Error still occurs after installing the service pack.
Using the non-AutoCAD driver works.
In AutoCAD 2014 and ASD2013 I cannot choose one of the printer, which is installed on Windows (OCE TDS600). It is strange, because Autocad sees it on the list of available plotters, but when I try to select it - it automaticly changes to "None".
The plotter is properly configured - I can print with it from Revit 2013 without any problems. Also when I switch account to any other (on that same computer) everything works fine.
I tried to add this plotter through "Add-A-Plotter Wizard", but each time I obtain an error massage "Autodesk Hardcopy component failed..."
[URL]
Unfortunately I am using ACAD 2000 so bear with me and the only ACAD training I have is a 3 day crash course at the local software reseller.
I am attempting to plot a drawing that was created from a template into a .pdf but it is plotting colored lines instead of black lines.
Here is some background info. My template is set up as a .dwt which I will save as a .dwg when I begin to make my drawings. Plot style table is “monochrome.stb” and I have selected Adobe .pdf as my plotter configuration. I then select the “Properties” then go to “Custom Properties”, “Paper/Quality” tab and then select “Black & White” as my color.
When I go to plot the drawing as a pdf and do a preview of what I am about to plot, I see that the lines that make up the drawing are a shade of gray in color. All my lineweights in the layers property manager are set to default. I have attached a blank drawing that is based off of my template.
2004 and how to turn "plot to file" off? Any time they go to plot the plot to file is already set and grayed out. It has been way too long since 2004 and I don't know where to have them look although I assume it is in Options somewhere.
View 2 Replies View Related