Have one problem with dimensions. I can see them on my model, but I cannot see them on the plot!
Dimensions layer is OK (it is not "no plot" layer, "VP Freeze" is off), especially that this layer contains some other elements that are visible.
I have a serious problem with AutoCAD placing improperly scaled dimensions within viewports. I have a drawing where half of the dimensions are correctly scaled and the other half are off by as much as 4 times their value. This occurs randomly without any rhyme or reason- and sometimes occurs whenever a drawing is opened. I know of a couple of drawings that if I simply open them, a dozen dimensions will scale up to 12x their intended value. It has happened to everyone on my staff. We are using LT 2011- but I have had a similar problem using 2004 & 2007 full seats.
View 4 Replies View RelatedFor some reason, I have 1 drawing that will let me select and modify some dimensions in a Paperspace viewport, but others are nonselectable. I can go to the Model Tab and select any dimensions I want.
If I select the dimension in Model Tab, I can go back to Paperspace Viewport and select that dimension, but now dimensions that were selectable before are nonselectable. unsure:
I am thinking it may be graphics card issue or some sort of limit.
Why is it that some dimensions in a viewport are out of sync with the rest of the dimensions? Eg. a correct dimension is 240, but the next time you dimension the same distance, you get 24 as a dimension figure?
Also, in a long run of continued dimensions one or two of the dimensions is out of scale? I have tried making all dimension Annotative, same dimstyle, etc.
I think sometimes Autocad forgets that it is in a viewport, so some dimensions are correct to the viewport scale while others are to the limits of the paper size?
Dim style is set to scale dims to match vp but when I layout a dimension it is not correct. I ran the "dimreassociate" command and that fixes it but only on the dim that I fix/selected. What am I missing? This is an existing legacy drawing so there must be some setting that has been changed.
View 4 Replies View Relatedi am haveing trouble with a viewport that is hiding everything that crosses the rectangular border. The viewport is acting just like a wipeout would. I got this drawing from a client and I can't figure out what is wrong with it. I checked to see if there was actually a frame with the viewport but when I select the viewport it only reads as one object.
View 6 Replies View RelatedDimensions show when viewport style is set to 2d wire frame, but only show when they are draged outside the viewport frame when it is set to 3D hidden. Policy is no diemensions in modle space. So how do I show dimensions in paper space with the viewport style set to 3D hidden?
View 3 Replies View RelatedTrying to change the color of a layer in a viewport (different than the default layer color (i.e. model layer color)). Objects are set to bylayer. Changing the VP color in the layer dialog brings up the color dialog, select a different color, click OK and the VP Color DOESN"T change in the layer dialog. It stays at its previous color. Occurs on several machines.
View 9 Replies View RelatedMy units are set to decimal. In acad 2004, the dropdown list showed options like 1"=50' In 2013, it shows options like 1/32"=1'-0" How can I get it to display such as 1"=50' like before?
View 2 Replies View RelatedI created a drawing in model. Then some how messed up and have two images showing up in landscape view via viewport. So it seems that their are two viewport windows working?
View 5 Replies View RelatedIn the full version of AutoCAD you could rotate the objects inside a vieport when you are in paper space. Can you do that also in AutoCAD Lite 2013? and if so, how?
View 2 Replies View RelatedI want to handle events on viewport.
When I resize my viewport the event must be triggered.
I'm using Qt in my project. So to display the QWidget in appropriate position I need events to do it.
Is it possible to scale a viewport with different X and Y values? Kind of like inserting a block with different X and Y values.
View 8 Replies View RelatedI have a drawing with 13 layouts for a set of easement documents. They are in TN state plane and if I close and open the drawing the coordinate system in every single viewport on every single layout resets itself centered about the origin (state plan of this part of TN is around (2210437,238922.) so 0,0 is a long way from there.)
This error can be reproduced simply by saving and opening the drawing again but only in this one single drawing. I have never encountered this before in 12 years. I have done it over and over hoping it would not repeat but it happened again and now I have to redo all of my layouts...again. This is costing me a great deal of time. I am running Civil 3d 2013 and am going to move this drawing back to 2012 in the hopes of stopping this bug.
I have audited repeatedly and I purge all of my drawings often.
I am running 64bit ACAD on a 3.4ghz Xeon with 8gb ram.
I can't find the viewport panel that was in 2010 in 2013. I have a panel for model space viewports but not paperspace.
View 2 Replies View RelatedHow do I get rid of them???
View 9 Replies View RelatedIs it possible to find and zoom to text without switching back to the model space.
ie I am in a viewport in paperspace and i want to find text which resides in model space. I want to zoom to that text in the currently active viewport and not switch to its location in model space.
I cannot get the layer color to change in a specific viewport. The property manager shows the new color I have selected, but the color does not change in my viewport.
View 7 Replies View RelatedI am trrying to rotate the view that I have in my viewport. I used to use a command that had the options Alingn, rotate etc but in this moment I do not remember that command. I you do not remember either
View 6 Replies View RelatedI have problem in one outside drawing in my office. in layout there are many viewport but viewport border line not appear.
I make all layer ON and unfreeze and unlock also viewport border not shown. Is there any option.
I started a drawing for a project, and so far I don't have much information in the drawing. I created a few objects, then went to one of my Layout pages and created a viewport to view the objects, and bam - some of the lines are missing (the yellow objects). As you can see on the screen grabs, I hovered over the Model tab to prove they're still there. Even when I double-click inside the viewport to edit through it and try to grab the objects, they're apparently gone. But they're not, they show up in the Model tab.
The layer they're on is turned on, thawed, and unlocked, but every object in that layer is missing when I leave the Model tab. I've opened viewports on other Layout pages, and they all refuse to show the yellow lines.
If its possible to have a viewport stay locked on a geometry in model space?
For example- we layout our page geometries in model space and outline them in a VP in paperspace. however say we move the entire drawing in model space- we have to go back and redo every viewport on every page. is there a way to prevent this or stop this from happening?
When I go to open up any of my files, any dimesion that has an "8" in it, is automatically changed to a different text font. It just happens to every "8" and no other number or letter. I have to individual change them on all my files. How can I fix this? It just started doing this today.
View 7 Replies View RelatedI'm new to Autocad Mechanical. How can I get rid of the arc on radial dimensions in release 2013? When a radius dimension is put in then moved an arc is automatically put in and the arrow head snaps to the arc, which seems it cannot be removed.
View 6 Replies View RelatedI am currently running map 3d 2012 and my co-worker is running 2013. When she plots in paperspace, there is text that gets plotted that is outside of her viewport. When I open up the drawing on my computer, it plots perfectly. I attached a clip of it, the thick black is our drawing border, the viewport is where the color stops.
View 1 Replies View RelatedHow to freeze a specific layer inside a block within the viewport?
View 3 Replies View RelatedThere is a default viewport in Layout1. How can I reposition and resize it on the paper? It would also be sufficient if I could delete it--how do I do that? (then I could create one that fit my needs)
Briefly, what are disadvantages of not using Model view?
Turn on/off layers in the current viewport only, I’m wondering if there is a command that can be plugged on the “quick access toolbar” by which one can turn on/off layers in the current viewport only.
The available command to do so is “Freeze and thaw in current viewport” (attached) and it sounds it can’t be plugged in the “quick access toolbar”!
Is there a way to plug the command “Freeze and thaw in current viewport” in the “quick access toolbar” (attached)?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Is there a way to get linetypes with text to read with the viewports?
*P-GAS,Gas Line ----GAS----GAS----GAS----GAS----GAS----GAS--
A,.5,-.2,["GAS",STANDARD,S=.1,U=0.0,X=-0.1,Y=-.05],-.25
It reads great in Model tab, but in paperspace tab, my viewport is rotated versus the Model tab
2013 Civil 3D
mvsetup gives this error, i want to align and rotate my object in a viewport....
The file mvsetup (.lsp/.exe./.arx) was not found in your search path. check the installation of the support files and try again.nil
I can't seem to change a viewport in layout view to show my drawing properly. No matter what I do the page only shows a very zoomed in view or a very zoomed out view. I have tried all menu options witht he word scale in, including the scale list. I have looked in the properties inspector.
View 5 Replies View Related