I am trrying to rotate the view that I have in my viewport. I used to use a command that had the options Alingn, rotate etc but in this moment I do not remember that command. I you do not remember either
View 6 RepliesI have completed an elevation view and made a viewport to view it in paperspace. I want to make another viewport and rotate the view so that the area where the elevation view was drawn is aligned with the elevation view.
View 9 Replies View RelatedI need to rotate a view through a viewport in paperspace and tried to use the mvsetup command but LT doesn't recognize that command. How I can do it?
View 5 Replies View RelatedI have a site survey that I am having rotation issues with.
In the model space the drawing is rotated so when I draw a vertical line it points up (which is what I am used to). However in the paper space, the drawing is automatically rotated so that north is now pointing up, and if I attempt to draw a normal vertical line as i did in the model space the line now points NE.
How can I rotate the view of the viewport in paper space so that my lines as vertical and horizontal. This would not be such an issue if it was just a plan, but I have drawn sections that just look ridiculous.
mvsetup gives this error, i want to align and rotate my object in a viewport....
The file mvsetup (.lsp/.exe./.arx) was not found in your search path. check the installation of the support files and try again.nil
i have a template, created a viewport and fit the model view in the layout space. However, when i scale the template... the viewport model doesn't follows the layout scale. Is there any ways to fit it so that when i scale the template i don't have to set the view again.
View 8 Replies View RelatedJust switforeveched to AutoCAD 2013 from 2011. I kept the classic interface as I did since forever. This is the problem I am having now. After I created a viewport in a layout, I right click on the viewport border fully expecting a menu to come up so I can set the type to be 2d hidden. But nothing like that occurs. The help menu came up. How do I get the viewport menu to set the view type?
View 2 Replies View RelatedI am working on a rendering on vanilla AutoCad 2013, and I am getting frustrated with having to reset my viewport to the named view every time I move my camera.
I know that when you create a viewport you can call up a named view, but is there any way to link it permanently?
I've got multiple viewports, some need to be orientated as portrait and others need to be landscape.
How can this be done without affecting the other viewports?
How do I rotate the drawing in viewport?
I want to have my profile and alignment to be in the same orientation on paper space. I have VPROTATEASSOC set to 1. I am not sure if I am using UCS and MVSETUP correctly. All information will work.
Let’s say you have a large building plan in model space but there is only one small area of the building that the view port is looking at. Is there a way that you can draw around that viewport and then take that into model space and paste it in the same place so now you have the same area located in both views?
At the moment I need to try and work out where the view is by drawing a rectangle around the correct area of the building and this is time consuming.
I could then trim/delete everything else outside that box.
I was in paperspace, clicked in the viewport to do something in model space and a compass with north south east and west showed up in the top right corner of my viewport. When I clicked on it, my x-ref rotated. How in the world do I re create this? I have no clue how I even accessed it or what command prompted this to happen.
View 4 Replies View RelatedMEP 2013
Are there any commands other than DVIEW that allow you to rotate your model space ONLY in the active viewport?
Is it possible to create a custom keyboard shortcut to Reset View in the Rotate View Tool?
View 1 Replies View RelatedIs it possible to rotate a viewport to an angle other than 90 degrees. I am trying to rotate a viewport 11 degrees counter clockwise. I cannot rotate the model.
View 1 Replies View RelatedHow do you rotate the view in Autocad (not just an object - but the whole view)?
View 7 Replies View RelatedTrying to change the color of a layer in a viewport (different than the default layer color (i.e. model layer color)). Objects are set to bylayer. Changing the VP color in the layer dialog brings up the color dialog, select a different color, click OK and the VP Color DOESN"T change in the layer dialog. It stays at its previous color. Occurs on several machines.
View 9 Replies View RelatedI'm using AutoCAD 2012 and I'm having a problem with 3D orbit. For some reason I can only rotate the view 180° along the X axis. Y and Z are fine, I can rotate a full 360°, but the X axis "bottoms out" if I try to rotate the view more than 180°. Is there something toggled that's causing this?
View 1 Replies View RelatedI have a drawing in dwg that's drawn vertically. By that i mean the texts seem to have been rotated at 90 degree. It's drawn by someone else. I darenot rotate it back fearing i might stuff up the coordinates. But it's hard to see as i need to bend my head to be able to read the drawing and all the texts in it.
Is it possible that without rotating the actual drawing, we can actually somehow set it to something more readable for example, rotate it back to vertical kind of angle. I heard it can be done with view. But i just don't know how to do that.
I use autocad LT 2005.
even in an empty scene my framerate in the quad viewport is about 7, 8 but in single view its 30-40..
I'm a little unsure if it was low like that before and I just realized now or sth. has changed. (Guess it has not been so slow as its really annoying) Using latest NVidia drivers and a 3DConnexion Navigator with 3DS Max 2013.
My units are set to decimal. In acad 2004, the dropdown list showed options like 1"=50' In 2013, it shows options like 1/32"=1'-0" How can I get it to display such as 1"=50' like before?
View 2 Replies View RelatedSome time ago, I used Adobe Reader (the basic one) to view and rotate a 3D model from Autocad. Yes, I know that I can export a Revit model into a DWFX and view it in Design Review, but that requires a ferr Design Review download. Some clients don't have administrator rights, are too lazy, don't have the computer savy to install, etc..., so a PDF 3D model would be nice.
---Is this possible with Revit?
---Is this possible with Autocad?
I have Adobe X Pro where I can enable this if Revit and CAD have the ability to print a 3D PDF.
Is there an easy way to rotate my drawing 90 degrees clockwise in model space, but leave it in it's orginal view in paper space. The reason is for drawing elevations - north, south, east, west from construction lines pulled from a plan. I've tried using UCS and was able to rotate, but it won't let me copy objects after doing
View 7 Replies View RelatedI am trying to rotate a survey in layout view so that it will print at 1:1000 on an A0 piece of paper as the survey is orientated NEW. When I try and rotate it in viewport so that it is aligned to the paper and then go back to model space the co-ordinates have changed. It is a important that the co-ordinates remain correct in model space as this is a real world hydrographic survey.
View 9 Replies View RelatedIs it possible to rotate a drawing view using iLogic?
View 2 Replies View RelatedIn 2013, just placed a view in an idw. Now I need it rotated 90°. In pre2012, there was a rotate Horizontal and Rotate vertical command where we could pick the edge and it would align to it.
Has that been taken out of 2013 or am I just overlooking it? Restarted Inventor and that didnt work. I did not restore the marking menu because I have some customizations that I dont want to lose.
For what its worth, Wiki help shows the "Rotate View" command in the video..... maybe I don't have the full version...IDK. Looks like I am missing several commands here, like Apply Design View.
When plotting sections the headwall storm structures are rotated 90 degrees showing the face of the headwall not the side. How can I rotate the structure in section view.
View 1 Replies View RelatedThere was a "rotate view" command in the old Eagle point software. How to do that in Civil 3D?
View 3 Replies View RelatedI have a problem with one specific drawing where I have created a right viewport; however, if I double click in the port to enter model space, the viewport automatically changes to a top view. If the viewport is locked, no change to the view. This problem only exhibits itself in one drawing so it must be some setting that is drawing specific.
View 1 Replies View RelatedI can only get horizontal or vertical 'orientation' in "Break" view.
How do I rotate it to say 60degrees to use on an iso view?
I have successfully been able to rotate the drawing view. rotating the view label.
View 1 Replies View Related