I am trying to rotate a survey in layout view so that it will print at 1:1000 on an A0 piece of paper as the survey is orientated NEW. When I try and rotate it in viewport so that it is aligned to the paper and then go back to model space the co-ordinates have changed. It is a important that the co-ordinates remain correct in model space as this is a real world hydrographic survey.
View 9 RepliesMy field crew assumed a coordinate system and surveyed a job. I need to rotate the points in my dwg to match another survey. I have not found a rotate points command. Other LDT type commands have been replaced by standard ACAD commands by adding the transparent commands to them. I tried to use the ACAD rotate command and the transparent commands to rotate my points, but there is no transparent command to find multiple points. I need to select the points by point number range if possible.
View 9 Replies View RelatedIs it possible to rotate a survey point symbol, my grips are missing? Civil 3d 2013.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
I am attempting to rotate my Survey database to my platted line bearing. I calculate out the angle of rotation around my section corner (in my case 0.0641) and when I apply the translate survey data, it rotates it at a much larger scal than specified (1.5236). I have also tried by "pick in drawing" to specify rotation without much luck.
View 5 Replies View RelatedI am trying to create a layout view using the view manager in paperspace. Whenever i click on define window, it does not record any information no matter where i click. If i do the same task in model space, it accepts the window i select. I am currently using civil 3d 2013 with the latest updates.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
i have a template, created a viewport and fit the model view in the layout space. However, when i scale the template... the viewport model doesn't follows the layout scale. Is there any ways to fit it so that when i scale the template i don't have to set the view again.
View 8 Replies View RelatedI wonder is there is a quicker way to rotate your drawing in the models to organize them in the layout?
This isn't fast and convient at all to rotate your hole drawing to fit it in the landscape paper for example.
I know I've read something in the past about a new way of doing it, but can't remember.
Is it possible to create a custom keyboard shortcut to Reset View in the Rotate View Tool?
View 1 Replies View RelatedI have been capturing data for measured building surveys with a Leica total station (TS06). When I upload the data into autocad i can see the node points (+) and text in the top view. When switch to look at the points from the front view (to produce an elevation), the text and points appear as a flat line, although the insertion point of the node/text is still correct. I need to find a way of rotating the text and points so they are visible in this view. I will then flatten the points and cut them to the top view to produce a 2d elevation.
we had a toolbar with a button to perform this function. However, now i don't have the toolbar,
How do you rotate the view in Autocad (not just an object - but the whole view)?
View 7 Replies View RelatedCIvil 3D 2013 / My drawing opens in layout view and all model objects are appropriately coloured by layer. If I hit plot at this point, my colour dependent .ctb file works fine. However, once I swtich to model view, all my linework turns white and if I switch back to Layout view it remains white and plots each line with the weight assigned to the colour white.
View 2 Replies View RelatedI couldn't see the rating stars under each photo in Survey mode; I only see the flag status. Now, it's probably something I did, like hitting a shortkey or something... but for the life of me, I can't figure out how to bring back that visual information. After searching online + fiddling around with the settings.
PS. Lightroom 4.3RC (why 4.3 RC, because I'm one of those plagged with a super slow Lightroom in develop mode, especially with my D800 files! I'm crossing my fingers with each RC update that the software will be faster... )
I'm using AutoCAD 2012 and I'm having a problem with 3D orbit. For some reason I can only rotate the view 180° along the X axis. Y and Z are fine, I can rotate a full 360°, but the X axis "bottoms out" if I try to rotate the view more than 180°. Is there something toggled that's causing this?
View 1 Replies View RelatedI have completed an elevation view and made a viewport to view it in paperspace. I want to make another viewport and rotate the view so that the area where the elevation view was drawn is aligned with the elevation view.
View 9 Replies View RelatedI have a drawing in dwg that's drawn vertically. By that i mean the texts seem to have been rotated at 90 degree. It's drawn by someone else. I darenot rotate it back fearing i might stuff up the coordinates. But it's hard to see as i need to bend my head to be able to read the drawing and all the texts in it.
Is it possible that without rotating the actual drawing, we can actually somehow set it to something more readable for example, rotate it back to vertical kind of angle. I heard it can be done with view. But i just don't know how to do that.
I use autocad LT 2005.
I'm using Lightroom 5, and was wondering if there's a quick way to display all items in a stack in Survey View.Expanding the stackSelecting all items in the stack.Switching to survey view.I was wondering if there was a quick way to click on the stack and get it to open in Survey View.
Failing that I was wondering if I could automatically select all the items in a stack.
I copied some Survey Data of AutoCAD Civil 3D 2013 for Surveyors to my C3D 2013 machine few weeks ago. Now I cannot do the "Import point file" of the Survey2 Data B in Survey Databases, because the Survey2 Data B is locked up - see the attached file that has a red circle with an arrow on. How I can unlocked the locked Survey 2 Data in the Survey Databases.
View 1 Replies View RelatedSome time ago, I used Adobe Reader (the basic one) to view and rotate a 3D model from Autocad. Yes, I know that I can export a Revit model into a DWFX and view it in Design Review, but that requires a ferr Design Review download. Some clients don't have administrator rights, are too lazy, don't have the computer savy to install, etc..., so a PDF 3D model would be nice.
---Is this possible with Revit?
---Is this possible with Autocad?
I have Adobe X Pro where I can enable this if Revit and CAD have the ability to print a 3D PDF.
I am trrying to rotate the view that I have in my viewport. I used to use a command that had the options Alingn, rotate etc but in this moment I do not remember that command. I you do not remember either
View 6 Replies View RelatedI need to rotate a view through a viewport in paperspace and tried to use the mvsetup command but LT doesn't recognize that command. How I can do it?
View 5 Replies View RelatedIs there an easy way to rotate my drawing 90 degrees clockwise in model space, but leave it in it's orginal view in paper space. The reason is for drawing elevations - north, south, east, west from construction lines pulled from a plan. I've tried using UCS and was able to rotate, but it won't let me copy objects after doing
View 7 Replies View Relatedhere's my process:
1- Import the asc file into my drawing.
2- Convert the asc file to a FBK file
3- Import my FBK file. The survey figure linework generated doesn't overlay my previously imported asc file. I checked the FBK file and the coord's match the asc file. I'm confused as to why the survey figures don't overlay the survey points from the asc file, since the coords match in both? The survey figures are all shifted .7' and 54deg. from the points. The elevations are all good on the survey figures, as they match the survey points.
So my quick fix is to explode the survey figures, since I don't really need them for what I'm doing, and then select all the 3d polylines and move them to them to an appropriate survey point. Everything then looks fine and I can get the job done.
However, I would like some insight as to why this might be happening. It's strange that the FBK and asc coordinates match, but the survey figures aren't lying over them.
When I am in Survey View and hit the Z key, some of the previews are blurry. The same thing happens in Grid View. However, in Loupe View, the images are fine when I the 'Z' key. Using Survey View would make things go faster when making my picks.
I tried rendering 1:1 but the returns a mesage that says renders are up to date and rendering was done.
Is it possible to rotate a drawing view using iLogic?
View 2 Replies View RelatedIn 2013, just placed a view in an idw. Now I need it rotated 90°. In pre2012, there was a rotate Horizontal and Rotate vertical command where we could pick the edge and it would align to it.
Has that been taken out of 2013 or am I just overlooking it? Restarted Inventor and that didnt work. I did not restore the marking menu because I have some customizations that I dont want to lose.
For what its worth, Wiki help shows the "Rotate View" command in the video..... maybe I don't have the full version...IDK. Looks like I am missing several commands here, like Apply Design View.
When plotting sections the headwall storm structures are rotated 90 degrees showing the face of the headwall not the side. How can I rotate the structure in section view.
View 1 Replies View RelatedThere was a "rotate view" command in the old Eagle point software. How to do that in Civil 3D?
View 3 Replies View RelatedI have a site survey that I am having rotation issues with.
In the model space the drawing is rotated so when I draw a vertical line it points up (which is what I am used to). However in the paper space, the drawing is automatically rotated so that north is now pointing up, and if I attempt to draw a normal vertical line as i did in the model space the line now points NE.
How can I rotate the view of the viewport in paper space so that my lines as vertical and horizontal. This would not be such an issue if it was just a plan, but I have drawn sections that just look ridiculous.
I can only get horizontal or vertical 'orientation' in "Break" view.
How do I rotate it to say 60degrees to use on an iso view?
I have successfully been able to rotate the drawing view. rotating the view label.
View 1 Replies View RelatedI wish to rotate my "entire view" to fit the portrait style.. idw. Well, the base must be rotated but I forgot the rule. [URL]
View 9 Replies View Related