I wonder is there is a quicker way to rotate your drawing in the models to organize them in the layout?
This isn't fast and convient at all to rotate your hole drawing to fit it in the landscape paper for example.
I know I've read something in the past about a new way of doing it, but can't remember.
How to organize multiple layout tabs. My problem is I need to plot 50 different looking bits from one main plan and need to save the layouts too for future reference..Creating 50 layout tabs in paper space does not seem the best way to do it.
View 7 Replies View RelatedIf i have two viewports in 1 layout: Is it possible to call different models (from different files) in it?
Lets say... ViewportA has model of drawing A. ViewportB has model of drawing B. But Both viewports are in the same layout.
I want to avoid using clipxref when inserting legends.
I just recently started using AutoCAD again after using Inventor for several months, and I'm having a very difficult time with annotations. I'd like to annotate the proper way, and I believe that's from withing layout space. I have several small weld details that simply need to be laid out on this drawing. They're all drawn to 1:1 scale, and I'd like to use Viewports to scale them up or down as appropriate.
How to properly annotate dimensions, text, and weld details such that they will all appear of uniform size among all details, but will be associative with respect to the geometry of each detail? This is quite simple in Inventor simply because of how it's designed to work, but AutoCAD works very differently and I'm very unfamiliar with how to work with text styles and dimstyles and weld-symbol styles in this manner. I can't get my annotation styles to work right.
Switching between each layout tab takes about 23 seconds.
What I know about the drawing:
-using AUDIT reveals no errors in drawing.
-Main drawing = 840 KB
-5 Xrefs total
-each Xref less than 1 MB each
-15 Layout tabs total in main drawing
-LAYOUTREGENCTL set to 0, 1 or 2 has no change on situation
When I go from model tab to layout 1 the drawing does not transfer over. I have went on youtube and looked and even watch the instructor video. Everyone's just transfers right over. mine does not.
View 9 Replies View RelatedCentering the drawing (or viewport) in the lay out, I’m not sure about the best practice to center my drawing in the lay out so that it will be centered as it sis printed from the lay out
This issue is already discussed in the link below
[URL].......
The size of the A4 is 29.7x21The size of by title block is 27x19Then I have like 1 cm margin from top, 1cm and bottom, 1.35 cm from left and 1.35 from rightI managed to have the view port / drawing centered on the A4 layout by setting the “plot offset” to be: X=13.5 and Y=10 using the printer “dwg to pdf.pc3”
It looks fine in the printed pdf, but when it is printed using printer “HP LaserJet P2050 Series PCL6”, the drawing is not centered on the hard copy A4 paper (attached)
What might be the issue here? Is the approach that I used to center the drawing in the layout is efficient? Why the drawing is centered correctly on the pdf but incorrectly centered in the printed A4 paper?
I created and saved a title block as a .dwt file, with no problems. When I open my title block, I cannot get a 3D assembly drawing to show as a 3D drawing in the title block on the layout tab. If I transfer the title block to the model space, it rotates to the same usc as the assembly drawing?
View 6 Replies View RelatedI have an exisitng drawing with 80+ layouts tabs that I would like to copy to a new template drawing.
I tried to use design center but to no avail.
How can I do this?
Running Windows 7 Pro
3.20 GHz
12GB Ram
AutoCad 2013 64bit
I'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies View RelatedI am trying to rotate a survey in layout view so that it will print at 1:1000 on an A0 piece of paper as the survey is orientated NEW. When I try and rotate it in viewport so that it is aligned to the paper and then go back to model space the co-ordinates have changed. It is a important that the co-ordinates remain correct in model space as this is a real world hydrographic survey.
View 9 Replies View RelatedIf I create a 3D model in AutoCAD 2013 using, say, 12 components; am I able to list the components in a report including any attributes that I attach to each component? Similar to Revit BIM.
View 2 Replies View RelatedI have two different models that I want to place on top of one another in a drawing. One is a before machining and the other is after. I would like to be able to show one model with a different line type on the drawing and have it superimposed on the other drawing so that somone can see them both and the difference between them. I looked at the Positional Representations feature and it does not seem to do this.
I am using Inventor 2013.
I have a fairly complex solid model built in Autocad 2013. I would like to dimension it now. I have various individual parts plus sub assemblies and weldments etc. What are best practices for doing this in an organized way? Should I copy various parts over to other drawings and dimension them separately? It seems odd to pile everything onto the one model. I know that Autocad is not Inventor (which I am somewhat familiar with), but does it have some similar tools for doing individual part drawings to keep things manageable?
View 4 Replies View RelatedI am making a control console with a bunch of plastic tags on my pilot devices. I use the sketch text tool to write the label on each tags.
When comes the time to make my drawing, I get my model sketch and they show on my 2D, no problem.
Well today, it seems Inventor 2014 just gave up on giving me my sketches. Here is the console view of of the lid with the tag texts showing:
Now let's go over the second lid on the same plan and get my model sketch to see the rest of my text.
Click on it and ....
Nothing! still no text.
Windows 7 Ultimate 64-bit SP1
Intel Core i7-4930MX CPU @ 3.00GHz
32.0GB Dual-Channel DDR3 @1600MHz
NVIDIA GeForce GTX 780M 4GB Ram
240GB SSD/500GB HDD
Autodesk Product Design Suite Premium 2014
At work we have recently upgraded to Inventor 2013 Pro, Although Inventor isnt the most widely used program in the company so its hard to find time to do some set up and get it going smooth. My problem is that i am working on a large process plant all done in inventor and the file is quite large. It takes along time to load and is really laggy when inside the model. Now the model is based in my local office's server my question is if i was using Vault would it keep a local copy on my C:// rather than trying to refresh all parts from ther server. If it is a matter that when working with large files using Vault is the better option than i will need to take some advantages
View 3 Replies View RelatedI'm trying to explore possible options for displaying 3D geology models. In the attached I want to chop out the yellow solid and leave the other solids "as is" to reveal the various strata when the yellow solid is removed. I have removed the yellow solid but the results are not quite what I was hoping for.
View 6 Replies View RelatedIn Inventor Drawing Mode how to select the models in Browser tree using VBA, I think using selectset is not possible in my knowledge. Is there any other way to execute the selection .
View 1 Replies View RelatedWe are looking for a workflow example of developing casting models into machining models.
Typically our castings are made from different materials (Fig-1) and then machining (Fig-2) are created from these castings.
Is creating the casting as an iPart (with different materials) and then deriving the machining from the casting the proper method?
Doing it this way seems to force us into making a machining for each casting material instead of just one machining that is an iPart. How should this be set-up for BOM purposes and for use with Vault (Base Version)?
Is there any other way to import MDT 2005 models to Inventor 2013 with having MDT 2005 platform loaded.
If not, where might I find MDT 2005. I have looked everywhere and it seems to be non existant. It would be alot faster than rebuilding anew in inventor and engineers hate to redo something alredy done correctly.
I want to insert another drawing layout tabs contents in current drawing.
It's easy for MODEL tab, but for LAYOUT tabs, I dont know how!?
I prepared a code for INSERTING MODEL tab in current drawing:
(defun INS_DWG (TAB path dwg P / blk)(setq blk (strcat ""*" path dwg """));(setq N (vla-get-count (vla-get-layouts)));;Number of LAYOUT TABS in dwg(if (or(= TAB 0) (= TAB nil))(command "INSERT" blk P 1 0)); TAB=0 or omitted ==>Insert MODEL;(if (= TAB 1));==>Insert the 1st LAYOUT in dwg file;(if (= TAB 2));==>Insert the 2nd LAYOUT in dwg file;and so on....);;;usage:;;(INS_DWG 0 "c:\test\" "test.dwg" '(0 0))
i have been drawing a 3d model and when it comes to dimensioning, i can only do it for the vertical and horizontal distance from the top view. i cant find a way to dimension the thickness of my model from the side or ront view.
how do i change the settings for this..
after 2013 was installed in my colleagues computer he now has the option to include Layouts when opening the publishing command, which didn't happen before. It is a slight pain removing these from the selection to be published and I was wondering how I get it to only select models and not layouts when opening the publish command as default.
View 5 Replies View RelatedI have a drawing in dwg that's drawn vertically. By that i mean the texts seem to have been rotated at 90 degree. It's drawn by someone else. I darenot rotate it back fearing i might stuff up the coordinates. But it's hard to see as i need to bend my head to be able to read the drawing and all the texts in it.
Is it possible that without rotating the actual drawing, we can actually somehow set it to something more readable for example, rotate it back to vertical kind of angle. I heard it can be done with view. But i just don't know how to do that.
I use autocad LT 2005.
How do I rotate the drawing in viewport?
I want to have my profile and alignment to be in the same orientation on paper space. I have VPROTATEASSOC set to 1. I am not sure if I am using UCS and MVSETUP correctly. All information will work.
Moments ago my crosshairs in the model space decided to rotate. I tried to undo, but apparently the damage is done.
I came across a thread on another website about trying UCS, world & plan etc which I tried.
While this did rotate my crosshairs to be straight and normal again, it rotated all of my drawings I have numerous sections on the page and unfortunately they all became rotated.
Is there a way to rotate the crosshairs and not change my drawing?
Is it possible to rotate a drawing view using iLogic?
View 2 Replies View Relatedhow to rotate an assembly drawing using vba codes?
View 4 Replies View RelatedDrawing started in LDD a few years ago. It was on a local coordinate system of 1000,1000.
The drawing has since been migrated to C3D2012. Now we have data in UTM coordinates that we need to match to the old data. Actually, we want to shift/rotate the entire original set of data to match the new UTM data, so we can continue in UTM for all future data collection.
So, I went through and turned all layers on, Thawed them and unlocked them. I made sure all points were visable, etc. Then I tried to move the original data (I also tried the align command, etc., with the same results) and found a glitch. After I moved the data, I found that there was some points and survey figures as well as a cooridore, that had not moved. The vast majority of the drawing had moved as expected, but the afore mentioned data would not move.
I have been using one drawing with in 50 Nos. layouts. Now I want to make the separate drawing for each layout. What should I do? Is there any lisp for do the above function?
View 8 Replies View Relatedwhy when I rotate the mtext to be isometric in this drawing, the multiple lines become offset.
I created the mtext orthagonally like normal and used the rotate command 30 or -30 angles. Is there some other type of isometric rotate or something.