after 2013 was installed in my colleagues computer he now has the option to include Layouts when opening the publishing command, which didn't happen before. It is a slight pain removing these from the selection to be published and I was wondering how I get it to only select models and not layouts when opening the publish command as default.
View 5 RepliesIs there any other way to import MDT 2005 models to Inventor 2013 with having MDT 2005 platform loaded.
If not, where might I find MDT 2005. I have looked everywhere and it seems to be non existant. It would be alot faster than rebuilding anew in inventor and engineers hate to redo something alredy done correctly.
I use 2012 at home and 2013 at office, I would like to PUBLISH more than one layout in grayscale, now I`m having it in color.
how can I define the plot style/ page setup within the PUBLISH command?
how to change the publish settings so that it prompts asking for a location to save when I publish to PDF? Right now it's just saving to the default output location and I need it to ask every time where I want to save the file.
View 3 Replies View RelatedUsing AutoCAD 2013, myself and several other coworkers have encountered an error message when creating a pdf with the publish command. I attached a screen shot of it.
We never experienced this in earlier versions. It doesn't happen 100% of the time, but it has been recurring more in the past month. I have restarted the computer after receiving the message and then invoked the publish command after restart and it was successful. I'm not going to do this every time I publish, nor do I see the need to turn off background plotting. That just seems like a bandaid fix.
I even tried publishing with different page setups to determine if it would react differently to any page setup, but it doesn't. I attached a view of my publish window, as well.
Macro that will publish selected layouts, and give you the save to option.I know you can do a right click and publish selected layouts....but I'm looking for a macro
View 2 Replies View RelatedHow to use Autodesk's DWG to PDF driver to plot multiple through publish? Whenever I try to plot more than one layout at a time I get a driver not found error.
View 2 Replies View RelatedI want to hide all layers through scripting. Firstly I have to select all layers for the same.
So, what is the command to select all layers?
We just started using autocad 2013 after many years on autocad 2005. I am working on a 3d model, and whenever I do a "HIDE" command, everything looks OK, but I can't select anything until I do a regen. This was never a problem in 2005. Some of the drawings I work on are quite intense and using the hide command would definitely work with selecting the proper objects. Why can't I select or find endpoints or centers any more after doing a hide?
View 1 Replies View RelatedIs there a way in the command line to select certain objects. For instance if there is a cirlce a line and a square can i just select the circle using the command line. When i try to save as an STL file i can't find it anywhere. Does surfsculpt not work? Everytime i use it it says it failed. Also when i make an ellipse is there anywhere to specify the X Y and Z lenghts?
View 6 Replies View RelatedI have made a couple of web templates that I would want to try and use to turn into a website. I make them all on PSCS, but I just wanted to know from the majority.....how would I make my photoshop work published into a web template?
View 9 Replies View RelatedIs there a way to change the default setting for the Array path command?
When I use the arraypath command I:
1st - Select Object
2nd - Select path curve
3rd - Type in "I" for Item to change to my desire spacing.
How come when I publish to plotter the layouts in a dwg in 2014 they stay in perpetual publish status and don't plot, but open same dwg in 2013, publish and almost by the time I get to the printer, all 7 layouts have printed.
View 7 Replies View RelatedIs there any way to change the text color in the "Select File" form from the default of white to black?
View 3 Replies View RelatedI'm doing a work where i need to copy many layouts. I can set a few at a time, but doing one at a time is faster (in the end). However, rightclicking the mousebutton on the layout, copy it and scroll to the bottom to 'place at end' it time consuming.
I rather have a lisp of some kind that can copy the current layout and place it at the end (most right) of the layout tabs.
if it is possible with some -command (commandbar) i can do it myself, but i can't find any command to do so...
is it possible to switch on all layouts by one command (shortcut)?
View 5 Replies View Relatedif I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
In Quick Select command function, I want to use more properties value to select one type text or other object.
View 9 Replies View RelatedWe are using a mixture of ACAD 2012 & LT2012. The command '-PUBLISH' is recognised in ACAD2012, but not in LT2012. Therefore several scripts that we have, to publish a .dsd file, do not function on the LT2012 machines.
What are the alternatives?
The end scenario is to be able to create a multi-sheet pdf file, from an .dsd file (that is automatically created via excel), by using a combination of .bat and .scr files - without user intervention.
NB: The .dsd file contains a list of page set-ups that are various views within a single .dwg file.
My company just switched over to AutoCAD 2014 and for some reason the PUBLISH command is not working, or following through with the printing once we complete the required steps to plot.
We are able to select the drawings to be plotted (8"x11" sheets), then successfully bring in our page setup that we created with one of the drawings to be plotted (which we use the same template with the same limits on ALL of our 'drawing templates' we design with.
After we hit the PUBLISH button at the bottom it goes into the background and just stays there with no errors or anything After a little while we end up just having to cancel and plot individually.
We used TrueView to BatchPlot which is identical to the batchplot(publishing) in ACAD 2014 WITH NO ISSUES!
Trying to print multiple drawings. I setup up the first sheet then publish command. I select all the drawings and change the page setup and they all change to the first sheet. Then I press publish and only the first sheet goes. I went through a tutorial on You Tube and did everything but result is the same, only the first sheet.
View 1 Replies View RelatedWith Autocad 2013 we have found an unconsistant problem with overwriting PDF files with same name. This only happens with publish command (ie, can just plot 1 layout to pdf and overwrite no problem). The funny thing is, it doesn't happen all the time - just 50% of the files (and yes, the file is not in use when attempting to overwrite).
View 9 Replies View Relatedrunning autocad 2010
Is there any way to reset plot files in publish without opening each drawing indvidually and resetting the plot file?
We use an in-house plotstamp (not the acad plotstamp) which uses rtext to show the file path and name. It works fine under all circumstances EXCEPT when we plot using the Publish command. The output from Publish shows the file path as the C:Documents and Settings... where the acad2005 software is installed instead of the correct network drive path where the dwg files are located.
Is there a secret setting somewhere that will keep Publish from changing the rtext? If we switch from rtext to fields, would that eliminate the problem?
I have problem with 3 users from about 75. When using the publish command inAutocad 2010 (1 user) and Civil 3d 2010 (2 users) a temporary copy of the drawing is opened while the particular layout is being published but on completion this temporary copy of the drawing is not being closed. This is leading to problems when a user has lets say 5 drawings open that require publishing. When finished the user has 2 copies of each drawing open and sometimes my select the wrong drawing when making further changes.
I have tried a repair on Autcad but that did not work.
We have our options set to Auto Publish on Save (Autocad 2011). On some of our stations, the PDF will pop up automatically. This is what we WANT to happen. On other stations, the pdf has to be found and then opened to make sure it is correct. (this step, which is apparently way to difficult for some people, is not being performed, leading to extra work/time later to complete the project) I had everyone ensure their DWGtoPDF.pc3 custom properties was set to "open in PDF viewer when done" (and when they do a straight plot, it does come right up) It just wont do it when its thru Auto Publish. Mine is one of them that comes up just fine....I have looked at every setting I have and tried to compare with theirs, but it all looks the same.
View 2 Replies View RelatedI am having trouble using the publish command when I set the plotter to a 22x34 sheet. We are able to print to an actual plotter just fine at that size, but when we try and make a pdf set at that size, it just errors out.
The error I get is
"ERROR: The current device does not support the requested media size."
If I create a 3D model in AutoCAD 2013 using, say, 12 components; am I able to list the components in a report including any attributes that I attach to each component? Similar to Revit BIM.
View 2 Replies View RelatedI am having trouble using the publish command when I set the plotter to a 22x34 sheet. We are able to print to an actual plotter just fine at that size, but when we try and make a pdf set at that size, it just errors out.
View 3 Replies View RelatedI just installed softimage 2012 on my pc and I've been having several bug problems. I can't select faces on models. Points, edges, etc. are available but not faces. also, when I change to textured view mode, no textures appear, it always shows as shaded mode. finally, xsi always opens with the layout messed up and on robot mode.
I 'm running it on administrator mode on windows 7 x64 also I tried disabling windows desktop styles etc.
I have an NVIDIA GEFORCE 9600 GS video card
8gb ram
700 gb hd
I have a fairly complex solid model built in Autocad 2013. I would like to dimension it now. I have various individual parts plus sub assemblies and weldments etc. What are best practices for doing this in an organized way? Should I copy various parts over to other drawings and dimension them separately? It seems odd to pile everything onto the one model. I know that Autocad is not Inventor (which I am somewhat familiar with), but does it have some similar tools for doing individual part drawings to keep things manageable?
View 4 Replies View Related