AutoCAD 2010 :: Very Slow When Undoing / Plotting Or Switching Drawings
May 13, 2010
When using the undo command, plotting or switching between drawings in Autocad 2010 and now also 2011 I am experiencing long delays of up to 15-20 seconds at a time which is rather frustrating. I am running a fast spec computer and can't seem to overcome it, I haven't had the problem with 2009 and when need to do something quickly have found myself using the outdated software. Other users in the same office have equal or lesser spec computers and are not having the same issues, I have tried a re-install and this hasn't worked either. I was hoping the new 2011 version would solve this issue but no luck.
View 9 Replies
ADVERTISEMENT
Dec 6, 2013
i have a test drawing attached with layout 1 and layout 2.
from model to layout 1 takes 2-3 seconds on my crappy computer, from model to layout 2 takes 8-10 seconds on the same crappy computer.
this sample i attached has a xref binded. which result is the same 3 and 8 seconds respectively.
you may think this is not a big deal. but layout 1 will take 10 seconds to to switch to if you have 5 xref while layout 2 will take a minute.
i did my research and haven't find the difference in variables between the two paperspace layouts.
tried all the variables made no difference:
psltscale, msltscale, celtscale, savefidelity, etc.
also set both viewoprts to undefined same thing.
the only difference is "1" is created from a blank autocad template by selecting "metric - no template", and "2" is imported from a civil 3d dwg after done a plan/profile production and that thing created that layout.
is there a tool to compare all variables between 2 layouts and find the differences? i am certain the problem lie within system variables.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 9 Replies
View Related
Apr 22, 2010
When switching from layout to model space, and back again, and when switching layouts the regen is slow to an extreme, upwards of (3) minutes. Using Renenall in layout, the regens are quite slow as well. Windows 7, AutoCAD 2011, NVIDIA Quadro FX1800, most current driver.
Additionally, when publishing, the regens are equally slow. LAYOUTREGENCTL setting seems to have no affect.
View 9 Replies
View Related
Jan 30, 2013
I have a delay when switching back and forth between model space viewports,
View 7 Replies
View Related
Jan 22, 2013
I recently upgraded from ACAD 2004 to ACAD 2012. In ACAD 2004, plotting was extremely quick. In ACAD 2012, plotting seems to be extremely slow. A basic drawing in 2004 plotted as a pdf file using CUTE PDF or PDF Creator would take about 5-10 seconds. In ACAD 2012, a similar file using the same CUTE PDF or PDF Creator will take up to 2-3 minutes. Not a long time but when you are plotting a dwg set that has up to 10 tabs in it, it takes 20-30 minutes just to plot. Is there any way to speed up the plotting in ACAD 2012? I have both ACAD 2004 and ACAD 2012 loaded on the same computer.
View 4 Replies
View Related
Sep 19, 2011
We currently have 4 licences for AutoCAD 2012 and once it was installed it takes a really long time to plot and the hour glass just keeps flipping. What can i do to resolve this problem?
View 3 Replies
View Related
May 9, 2012
Autocad 2012 was working fine until a week ago when it started taking a long time to open drawings--even search for drawings on our network. It also takes at least 30 seconds to save files, where it used to take 5 seconds at most.
I found the AutoCad 2012 and AutoCad LT 2012 SP1 Ribbon Hotfix, which sounded like my problem, but it is for Product Version F.107.0.0 and I have Product Version F.51.0.0.
View 5 Replies
View Related
Feb 22, 2012
When ever i open a dwg file (it contains Xref files) it's take a long time to open... and i tried the same file to open in Autocad 2007, it's opened with in a second.... and also note that the Autocad 2007 installed in a Dual core pc with 4gb RAM.. and the 2012 is installed in Core i7 12gb ram with NVIDIA graphics card.. and it's 64 bit Windows 7 too.. When i try to open a file it's shows "Loading c:/ ....... base.dwg, etc.. ..
View 8 Replies
View Related
May 21, 2013
We installed Autocad LT 2014 on our new computer and I noticed that it is unusually slow to switch between layouts.
The bottom bar (where the paper/model space button is) kept flashing/switching as if its thinking whenever i click from one layout to another. Even when I'm zooming in and out, the bottom bar kept flashing slowly.
I was hoping that a new computer+new cad will make our work more efficient and faster, but i noticed theres a lot of lagging and general slowness in loading files.
View 7 Replies
View Related
Apr 8, 2011
Several users here in my office have been having a strange issue with ACA 2011. When doing various things such as, saving, regen'ing, or manually switching between open drawings, ACA will "blink" to a completely different drawing.
For example, right now I have 4 drawings open. I'm trying to go from drawing A to drawing B. It goes to drawing B and starts to regen model space, then it blinks back to drawing A. Does the same for any of the 4 drawings. Only way to make it stop was to close drawing A.
As I said, it not only does this when switching drawings. It'll also do it after it's done saving and when I try to regen.
View 9 Replies
View Related
Oct 25, 2013
I'm having an issue in 2014 with switching between model and paper space. It takes 4-to-5 seconds for me to begin working in these spaces, after switching. Going between tabs is not an issue, it's just switching between model and paper space that causes the lag.
View 2 Replies
View Related
Oct 5, 2012
When I try to switch to a different layout in a drawing AutoCAD will switch to a different drawing. Then I have to go and get back to that drawing to do anything to the layout.
View 9 Replies
View Related
Aug 17, 2011
I've been working on a map that contains a number of standard AutoCAD objects, as well as three sets of FDO objects. All FDO items are SDF's. If it makes a difference, 2 of the FDO sets are points, and the third is lines. All of the FDO items are styled fairly extensively, but there are no labels.
When I try to print to a regular plotter, it just spools up for a half hour or so, then I get a message from the system that the plot has failed. For whatever reason, I never get an actual CAD error message when this happens. When I try to print to PDF using the on-board DWG -> PDF driver, I get a pdf with every drawing object smeared accross the bottom of the print - it's completely un-useable. I'm currently trying to print using a 3rd party PDF driver (Cute PDF). It almost crashed my system, but now I am looking at a print file that has spooled up to 2.5 GB! The actual drawing file is a bit under 10 Mb in size, so I don't know where this huge plot spool is coming from.
I'm using Map3D 2010 on a Windows XP machine with the max (4GB) of ram.
View 1 Replies
View Related
Oct 2, 2011
When I plot from AutoCad to PDF I usually have around 8 A3 drawings in other words 8 A3 paperspace drawings. When I plot these I do each one separately, the process to print the whole lot to PDF in one hit.
View 3 Replies
View Related
Sep 12, 2011
I am having a problem plotting drawings as JPEGs. I have used the Page setup manager to select the JPEG plotter and I want to plot only in black and white. Previewing the plotted JPEG looks fine but when I then import the JPEG into a document, line elements appear in grayscale and it appears that only some polylines appear as true black.
View 9 Replies
View Related
Feb 22, 2011
Weve recently updated our systems at our office to OS Windows 7 Pro 64 bit. Im currently using AutoCad Architecture 2010. We also upgraded to Adobe Acrobat X.
The iissue i have is when plotting to PDF (selecting Adobe PDF as printer) it takes a long time to spool. Sometimes it takes as much as 4 mins before it completes the PDF. Other times it just crashes.
This is the first im using Acrobat X. Previoulsly i was using Acrobat 8 without issues. My thought is there might be a compatibility issue with the new version of Adobe X. Or perhaps its a simple as the settings im using. The other user in my office is running the same system, but hes using Acrobat 9, and of course his works flawlessly?
The temporary work-around is Exporting to PDF within AutoCAD.
View 1 Replies
View Related
Oct 21, 2013
I have recently installed Autocad 2014 and am experiencing very slow and jumpy files when using x-refs. The other machines in the office where I work are not experiencing the same problem and apparently my machine is more powerful.
Originally we thought this might be a network issue (as x-refs are being referenced through the network) but when I put the actual reference files on my computer, I experienced the same issue.
View 2 Replies
View Related
Oct 2, 2013
Say I have 10 .dwg files. Each .dwg file has a printable layout, a load of geometry, and in particular, a layer called "Animals" with some geometry on it. During .dwg creating some of the CAD engineers turned off the "Animals" layer in MSPACE and saved the drawing.
I now want to come along as the reviewer and plot these 10 .dwg files all with the "Animals" layer turned on. Currently I'd have to go into every .dwg file and turn back on the "Animals" layer, and then plot.
View 1 Replies
View Related
Aug 13, 2013
Is there a way to increase the access time so printing is faster?
I have AutoCAD 2013 and access drawings over VPN (6 meg pipe).
Both opening the drawings and especially printing them take a very long time.
It takes about 8 seconds to open drawings, due to all the modules loading on the bottom-left of AutoCAD. Printing takes even longer than opening the drawings.
Is there a setting I can change to speed-up access time?
View 5 Replies
View Related
Jun 17, 2011
We have Adobe Acrobat Pro which has a plugin to allow batch plotting of PDFs from multi-sheet drawings. Works awesome in Autocad 2009 and before. It DOES NOT work with Autocad 2011!
We have drawings with 70 sheets and it's nice to print the entire document to a single PDF in one step. Takes less than one minute in Acad09. Nice!
View 5 Replies
View Related
Nov 26, 2013
I am facing problems with my autocad when i import Revit drawing to it. The file start working extremely slow, and crashes often.
View 1 Replies
View Related
Sep 11, 2012
I am using autocad arch 64 bit on win 7 and am having problems switching out of xref classic so that the newer xref dialog comes up. i edited the SDI but then i cant close a drawing and opening creates more problems.
is there a way to get the xref dialog back?
View 9 Replies
View Related
Jul 9, 2012
Am using Autocad 2012 with SP2 downloaded, note the problem does not occur in Autocad 2013... So basically if you open the dwg you will see it opens in paperspace, the viewport is locked to a specific scale etc. Now go into model space where the dwg is, you should be able to zoom around, pan etc fine, problem is when you now go back into the layout or paperspace. You will notice that upon re-entering paperspace that the vport is highlighted, ie there is a thicker outline of the vport boundary, however am still in paperspace according to the tabs. When you now try zooming in or out using the mouse scroll you will notice an additional copy of the viewport is imprinted on the screen. Thats the problem. Doing a few undos will set you back right again.
So far we are inclined to think that its either something to do with the UCS or the units that the program is getting confused with but havent been able to find a solution. Also bear in mind that it seems to work fine in 2013. Its probably something really simple that we've missed but thought would try anyway Will attach the dwg file.
View 2 Replies
View Related
Mar 4, 2012
(Again) Switching the “data type” of the cell,I’m not sure why the AutoCAD doesn't allow changing the “data type” of the cell in the table for already existing data. For example, in the attached table, I wanted to switch the “data type” from “decimal number” to “percentages”, but sounds that the AutoCAD doesn’t allow this function.
In the Excel, for example, we can switch the “data type” easily by selecting the target cells and choosing the format we need! Quite simple, in the AutoCAD, it seems that it needs some work around!
View 3 Replies
View Related
Oct 17, 2012
When I work in large files (10,000 kb +) I experience significant delays when copying large amounts of information (copy a floor plan) or when switching between layouts or saving the dwg. I wish I could tell you it started right after I But I just recently started working with the larger files. So this could have been an issue from the time I bough the machine - 18 months ago.
it's either an issue with my graphics card or processor. I would like others to comment on their opinions on adjust my set-up to be more efficient
I believe I have the most current driver for the video card. Did I hear right somewhere that there is no good driver for the Quadro 4000 to work with 2012?
View 6 Replies
View Related
Nov 1, 2012
I asked this a long time ago but I'm hoping something has changed. If I have 2 Modelspace viewports is there any way to switch their contents? Right now I create 2 views and restore them in alternate viewports.
View 1 Replies
View Related
Feb 25, 2012
Switching the “hatch” to be “associative” gives “not applicable”!
I’m wondering why as I choose the “yes” for the “associative” property of the “hatch” then this gives “not applicable” as shown in the screenshot below
What might be the reason?
View 2 Replies
View Related
May 25, 2011
So I have the educational version of ACAD 2012 and this is my first time using that version. My model is done and I formatted my layout with a border and the model to scale in the viewport. When I go to plot to PDF, all I see is the border. I've tried fiddling with colors and viewports but neither of those did anything.
View 3 Replies
View Related
Oct 18, 2013
I'am a quite expert Autocad user, but I have now a version wich seems to have some problem in plotting using Monochrome.ctb or Grayscale.ctb
If I choose one (It's the same problem with both), all the coloured layer in the layout visualization become black of course, but if I preview or I print it, the pdf created has all layer's colours.
of course the PLOT WITH PLOT STYLES box is checked.
View 1 Replies
View Related
Nov 28, 2011
when i try to plot a layout or modelspace with a pdf xref'ed into it, to a new pdf, the resulting pdf is illegible - first off it becomes rasterized even though it's a vector document produced from word, and secondly it is extremely low quality. I have looked far and wide for settings that might work with this but I have come up empty -
View 9 Replies
View Related
Feb 8, 2012
The AR-Sand hatch is visible in a published pdf file, but does not plot.
View 1 Replies
View Related
