I dont like to have Layouts Tab (Model, Layout1, Layout2,...) on bottom left side of AutoCad and I prefer to hide it.
Is there any system variable for that purpose? I just hide it via lisp only:
(vlax-put-property (vlax-get-property (vlax-get-property (vlax-get-acad-object) 'Preferences) 'Display) 'DisplayLayoutTabs 0)
Why can't I get this to work?... okay, it is being used via AcCoreConsole.exe
I get the following...
; error: bad argument type: VLA-OBJECT nil
(defun delAllLayouts ()
(vl-load-com)
(vlax-for item
(vla-get-Layouts
(vla-get-ActiveDocument
[Code]....
As you smart individuals can figure out, we do up drawing packages for construction that consist of several drawings, hundreds of drawings, for several modules of construction. Our process usually consists of one layout per drawing, so that the lisp guy can do a drawing count and put in sheet numbers based on how I manipulate the list of drawings in the one directory folder.
Now I have a client, despite the way we currently do things, requires that about 70% of the drawings will have multiple layouts. Now we're back in the stone ages, manually putting in sheet numbers, eating up our budget for this contract.
I am looking for a lisp that will rename all the layouts automatically. I tried the Layoutlist function but the output is not in order. Is there anyway that i can get all the layouts in a drawing from left to right order. for eg. i have layouts from layout1, layout 2........layout10). The layoutlist returns as layout1,layout10 etc...instead of layout 1 layout 2.
View 4 Replies View RelatedI am looking for a LISP to automatically rename all my layouts. I would like the first layout to say "HWY 400 (01)", second layout "HWY 400 (02)", third layout "HWY 400 (03)" ect..
View 4 Replies View RelatedI am trying to create a lisp to delete all the empty layouts from mydrawings. I do not see any code to control this.
View 8 Replies View RelatedAny routine to re-size viewports in multiple layouts? We have to re-size viewports as they were created a little too small and are now spread across almost 1000 drawings in 18 dwg.
View 6 Replies View RelatedI got a model-file with several layout tabs and I want to delete a block in all layout tabs.
View 9 Replies View RelatedI have a csv file that has the drawing names and their layout names listed in columns A and B. Before I begin a project, I have to create the Sheet List (in Excel) and the csv file. The csv file is needed because I have a lisp routine that reads the csv and updates all my Title Block attributes in all my drawings. (VERY sweet program) What I'm wanting to do, is create new layouts (using my dwt) based on the information in the csv file. So, when I start a new project all I need to do is create the base drawing files first. Then, in my csv file I've got those drawing names listed in Column A and their corresponding sheet titles (Layout names) in Column B. I run the lisp and it reads the csv and creates layouts in all those base drawings and naming the layouts with the sheet titles from column B.
Column A Column B
DRAWINGS SHEET TITLES
drawing1.dwg A100
drawing1.dwg A101
drawing"n".dwg "n"500
Etc, etc.
I'm needing a way to automate creating hundreds of layouts at once. (very time consuming).So the lisp has to be able to read a csv (or Excel--doesn't really matter) and create new layouts (using my dwt) in as many drawing files represented in column A. [and filtered so it doesn't create duplicates so I can run the routine at a later date when new sheets are added to the drawings] Captcha?
I have a specific problem with renaming layouts. I found some similar lisps, but I just could not make them work.
In every layout I have following attributes.
PROJECT: 306
PHASE: RD
OBJECT: A0101
PART: EL
DRAWING: 611
ZOOM: X
REVISION: 01
I need to rename every each of layout using those attributes. Layout's name should look like that: "306_rd_A0101_el_611_x_01" . "rd", "el" and "x" must be written using lowercase.
Is it possible to turn off the UCS icon in model space as well as in each layout? I'd like to set this up in the acaddoc.lsp files so that they're turned off in all opened drawings.
View 6 Replies View RelatedI would like a routine that will determine if 'Page Setup A' is in the drawing and if so, apply 'Page Setup B' to all all layouts within the drawing. I would like to have it run upon drawing open in the ACAD.lsp
Basically we've changed our master page setup names, and now when a user switches to modelspace then back to paperspace the layout loses its configuration.
Is there any way of applying a new page setup to all the layouts at once?
View 5 Replies View RelatedHow would I get LAYISO to freeze not turn off layers I do not want to see? I did this in AutoCAD 2006 but recently upgraded to 2014 and do not remember how I did it.
View 6 Replies View RelatedIs there a lisp that will allow me to do a continuous dimension, but will alternate the dimension position from low, high, low and high? If there is no lisp already created, how to create one?
See Continuous dimension attachment for example.
I work at a glass and glazing company and this is how we dimension mullion width and DLO. See typical window dimensioning attachment for window elevation with dimensions.
I have a list ("temp.dwg" "temp2.dwg") and would like to add the string "insert text here" into each item in the list resulting in ("insert text heretemp.dwg" "insert textheretemp2.dwg"). how would i go about doing that using LISP?
View 2 Replies View RelatedIs there a way to programatically set a visual style before a drawing actually opens?
We have some huge models and people seem to forget to change their visual styles back to 2D wireframe before saving and exiting drawings. Some models will crash on some workstations when trying to open in a rendered mode.
I found a lisp with a function that looked to set viewport visual styles. But it does not seem to be supported anymore. --> (vla-put-VisualStyle vport 1)
I'm trying to write a lisp routine that, when I invoke the mleader command, osmode is set to "nearest" & orthomode is set off. I then would like the original settings to be returned.
attached is what I have written so far:-
Lisp that switches back on Selection Preview i.e. thickens and highlights lines when you hover over them?I don't know why, but they are always unticking the boxes.
View 4 Replies View RelatedIs it possible to execute a certain command based on multiple selections withinin a dcl? for example: two radio colums, one with selections A and B, and a second with selections 1 and 2. is it possible to program commands based on user selections from each column? ex: if A and 1- do a command. A 2- do a different command, etc...
I tried :
(action_tile "key1" "(setq A t")
(action_tile "key2" "(setq B t")
(action_tile "key3" "(setq 1 t)(done_dialog)")
(action_tile "key4" "(setq 2 t)(done_dialog)")
(if
(and (a) (1)
)
(command ...
but was unsuccessful. no matter which combination was selected, the command under all combinations would run.
I am trying to find a lisp that would get an attribute value (tag name = NBR_5) . I'm trying to run a simple routine that would let the user place the value from the titleblock attribute as text on a drawing. I see a ton of articles regarding getting attributes but I am not well versed in programming.
View 9 Replies View RelatedI have a routine that work fine, but I receive a nil at the end of command. How to fix that?
View 7 Replies View RelatedI'm trying to find acceptable point values to feed to the vlax-3d-point function for a vla-addmtext function. With vanilla lisp I just provide the point as x y = "7/32" "2-3/8". So I assumed that I could drop a 0 in for the z like: (VLAX-3D-POINT "7/32" "2-3/8" 0).
Then I thought I was going to be tricksy and try (vlax-3D-point (getpoint)) believing that I could pick the point and get what I need to feed the function, but yet again, no deal. The command line gave me:
node
of #<variant 8197 ...>
Nothing I can use in my code. So how do I find the point in a format that vlax-3d-point will like?
What is the magic word for put a point at each end of an arc, the lisp I have only put a point at center of the arc.
(defun cAA ( / i j ss e1 e2 p1 p2 p3 points )
(if (setq i -1 ss (ssget '((0 . "ARC"))))
(progn
[Code].....
Is there a quick way of getting the value of an attribute?
I have an attributed block called "tp_attributes" and it has and attribute called "OrderNum".
I just want to be able to quickly grab that value.
I use Spell Check regularly and I always check the entire drawing. I would like to add to the Spell macro so that when I pick Spell from the toolbar it goes past the Check Spelling window and begins checking the entire drawing.
I believe I need to insert Alt S into my macro to select Start from the window to begin the check. Is there a character or series of characters that will represent Alt in a macro?
I upgraded from Autocad 2004 to 2012 recently and my lisp file doesnt work anymore.
what it's supposed to do is when looking at the layout tab that you want you can switch to the model space location of the same zoom as the layout tab without messing with the layout zoom.
(defun c:msp ()
(setq cm (getvar "cmdecho"))
(setvar "cmdecho" 0)
(command"view" "d" "tmp")
(setvar "tilemode" 0)
(command"pspace")
(princ "Click TWICE on desired VPORT: ")
(command "mspace" pause "view" "s" "tmp")(princ)
(setvar "tilemode" 1)
(command "view" "r" "tmp")
(setvar"cmdecho" cm)
(princ)
)
I need a program that simulate this DOS command: dir /on/b *.dwg >list.txt
it list all dwg files on current open dwg file folder and sort them and finally put them in a text file with list.txt name. something like thistype list.txt)
test1.dwg
test2.dwg
test100.dwg
test256.dwg
test1005.dwg
(sort alphabetically and logically) because of disabled DOS utility in my PC I need a pure lisp functions, I tried to wrote this program but I couldn't!!
(defun c:listMaker()
(vl-load-com)
(setq path (getvar "dwgprefix"))
(setq fn "list.txt")
[code]...
and also I need a append a string(='This Is EOF') in the last line of the "list.txt" file.
I have text objects with the same Z value and I will select as follows:
(setq sstxt (ssget '((0 . "TEXT")(8 . "APS-text"))))
How to store this value in another variable "zvalue" to apply to:
(command "change" "select text objects" "" "_p" "_e" zvalue "") ?
the following returns true since the @ symbol tests for an alpha character.. (wcmatch "S101" "@*").What is the Dot Net equivalent?
View 2 Replies View RelatedIs there a command that is the opposite of starting an application to open up a file? Like:
(startapp "PlaySound.exe" (findfile "CuckooClock.wav"))
Instead of starting an application, how to shut all of its instances down. Let’s say I have iTunes and/or Internet Explorer w/ a few tabs open and I can close them down without getting to the application to terminate it the usual way.
Naturally,
(endapp "iTunes.exe") doesn’t work :-))