AutoCAD 2010 :: Trim And Extend Will Not Work
Feb 14, 2013
I am using Autocad 2010. I have been using 2008, but recently upgraded. I have a project that one particular file is driving me nuts! I can not use trim or extend on any existing line work. However, if I draw two non intersecting/crossing lines and ust the 'TR' command it works fine. I have checked to see if all lines are in the same plane and the appear to be. The only way I can trim or extend is if I use the 'Flatten' command.
View 6 Replies
ADVERTISEMENT
Sep 6, 2013
This problem has cropped up in the last few months. It only happens intermittently.
Typically I select Trim, or Extend command, right click to select All rather than a specific object, then selcet the objects to be trimmed or extended.
Sometimes though, the All command is not activated and I have to select the object to be trimmed or extended to, then select the objects to trim, etc. Then the next time I right click for All it works.
View 9 Replies
View Related
Mar 10, 2012
I have a 3d drawing file which I manually flattened except the section. The ground plan is at 0 Z axis.
Now I am trying to draw lines on top of it, and I cannot extend my lines. Any solution to this?
Additional question:
I also had some difficulties when I was trying to flatten the 3d model. "Flatten" command did not work. I understand Flatshot did not work because these are not solids. But why Flatten did not work? That was why I had to manually change start and end of z position.
View 6 Replies
View Related
Aug 30, 2011
I moved to a new PC the other day and have not been able to extend or trim to a line that is not connected. I figured it would be an apparent intersection but maybe I haven't got my settings right as it's not working. I am having to drag the lines right now and it's not very accurate!
View 2 Replies
View Related
Aug 31, 2011
These polylines will not Trim or extend to the arc. Works fine if I Explode them to lines. Z=0 also.
View 4 Replies
View Related
May 11, 2011
I need to Trim or Extend Sketches. Is there any API to access the Trim/Extend Tool?
View 1 Replies
View Related
Aug 30, 2012
My Client save AutoCAD 2012 file into AutoCAD 2002. Now he is facing a problem that whenever he is working on that file some commands in AutoCAD 2007 like Extend and Trim is not working on existing lines and X-ref lines. And when i open that file into AutoCAD 2012 and 2013 then all commands are working.
when he create new line and try to use these commands then all commands are working but when he try these commands on existing lines and X-ref then commands are not working.
View 7 Replies
View Related
Mar 12, 2013
How do I extend a line to a block or trim? seems like every time i trim or extend the line to a block the line won't recognized/notice the block. what can i do?
View 1 Replies
View Related
Oct 8, 2012
I am trying to use AutoCAD 2013 to create a complicated roof. What is the best way to extend 3D solid roof planes and to trim 3d Solid roof planes that intersect each other? I have tried slicing and can't quite get the hang of it!
View 9 Replies
View Related
Aug 14, 2012
A problem i have encountered with LT 2011 is the extend or trim command freezing/taking a long time to extend or trim.
If i zoom up close, extend/trim works as normal instantly, but if i zoom out further & try the same extend/Trim it can take 30 seconds or more.
I dont remember having this issue on previous LT versions, I've found this with many if not all drawings
View 1 Replies
View Related
Jun 28, 2013
My 2011 AutoCAD LT for Mac just started randomly changing the trim, fillet, and extend variables. I looked on other posts and learned how to change them back to the default settings. Since then they keep changing back every few minutes.
Specifically, the TRIMMODE keeps changing from 0 to 1, and the fillet trim mode keeps changing from TRIM to NOTRIM. One of those settings seems to make the extend command also not work as expected. I've been using this AutoCAD install on this particular Mac for over a year. The only recent change is an upgrade to OS X.
View 3 Replies
View Related
Aug 1, 2013
How to create a work plane, say, in the middle of solid while editing, to use the extend and contract commands using IV2014? I'd like to avoid using Fusion as an option if possible. This should really be an easy thing to pull off as many STLs are now available for 3D printing but simply need a quick stretch here and there to print accurately.
View 7 Replies
View Related
Feb 8, 2012
I have turned off or unchecked "Extend leader to text" (Multileader Style > Modify > Content > Extend leader to text) in all my templates.
Yet, when I start a new drawing using those templates, that feature is turned on (checked) again.
I've tested this several times. Yes, I'm using the same templates I've been saving. I've even created a new template from scratch with none of our standards in it. The check for Extend leader to text keeps returning.
I've tried this in both AutoCAD and Civil 3d.
Any way to duplicate this?
[URL].....
View 2 Replies
View Related
Feb 20, 2012
I have a rectangle shape (a 3D polyline) as in the attached DWG. I want to Offset, Scale, Extend (call it whaever you wish) so that the new 3D polyline (after the scale, offset or extend) is at the same plane as the original one.
Obviously the Z values of the new 3D polyline will be different from the original.
View 2 Replies
View Related
Jun 15, 2013
Is there an LISP file that can zoom extends all layouts?
View 1 Replies
View Related
Dec 15, 2011
I am in no way an expert in ACAD.We are experiencing "random" problems where we have a multileader with left justified text and the leader extension option turned on. There is probable a common trait with all the offending leaders but we are yet to see it.
Basically, with some leaders, the landing length is being set to a negative value. We have only noticed this since we turned on the extend leader to text option. The result of this is that the leader lines can sometimes cross through the text. Sometimes we fix them, then they revert to a negative value again when we close the drawing.
We can, of course, uncheck the extension option in the drawing and the problem appears to go away. However, we have unchecked this option in our templates now, but when we open a new drawing based on the updated templates, the option is checked again.
View 2 Replies
View Related
Mar 14, 2012
Inside the trim command I cannot hit "shift" to switch to the extend command instead.
View 6 Replies
View Related
Nov 26, 2013
why trim wouldn't work in cs5? It works if the background is white, but anything else and it doesn't work.
View 1 Replies
View Related
Jun 21, 2012
I'm working on this model and I am trying to use the surface trim command in cad 2011, but its not working and its pissing me off. I want to use the trim and use the dome in my model as the cutting edge to cut the parts of the curved walls that fall inside the dome but it is not working. I have the file uploaded.
View 1 Replies
View Related
Jun 11, 2011
Half the time I use TRIM tool vector on top of vector it doesn't work.
I can't seem to figure out why in some cases trim works and in others it simply puts the top object under the bottom one instead of trimming it from the bottom one.
Does same thing in X3 X4 and X5?
I've tried everything from making sure both were filled with solid color - all curves closed, nothing else grouped with them - nothing - sometimes I have to try a couple times doing same thing and it will work, other times not at all - even after trying a save (which sometimes works)
Both top and bottom show on layer one in properties too!
View 14 Replies
View Related
Feb 7, 2014
I have an iMac computer with Norwegian Keyboard.
I cannot get the left and right bracket to work - so maybe it is some other keyboard command I have to do to make it work?
View 3 Replies
View Related
Nov 3, 2013
I have some issue in Trim command,.
(Please see the attached picture before read the below steps,.)
generally, I use trim command like this,.
Command: tr (enter) (enter)
select object: (I will select object which I need to trim)
it gave the results shown in the picture named "Earlier result"
But now I am getting differently like "current result"
But Earlier result is comfortable for me,.
Is this because of setting problem?
View 2 Replies
View Related
Sep 15, 2011
My company used autocad 2009 and a printing Plug-in which was made by VB,they worked perfect.But when my company uses autocad 2010,the problem rises:The printing Plug-in doesn't work.
Although I downloaded and installed the Microsoft Visual Basic for Applications Module 32bit (from URL....), the printing Plug-in can not work with autocad 2010.the commands from the plug-in cannot be recognized.
Firstly I install autocad 2010,then VBA,next printing Plug-in.Is there anything wrong?
View 5 Replies
View Related
Nov 21, 2013
I'm having some problems with inventor fusion and autocad mep.I have a solid object that i would like to edit in inventor but i get the unknown command error when entering editinfusion
I went through the cuiload and loaded the cuix. file and now the icon editinfusion shows up on the ribbon. After selecting a solid object and clicking on the icon i get the same error message.
So i went to AutoCAD 2013 (not MEP) and did the same thing and it worked.
My question is, can MEP and fusion work with one another or does this strickly have to be AutoCAD and Fusion?
View 3 Replies
View Related
May 6, 2009
I've just installed ACA 2010 on my laptop on Windows XP64 bit
When I select a command such as the wall or door command. The command starts then exits out before I can draw anything.
View 7 Replies
View Related
Oct 20, 2011
My ribbon an pull down Menu show a Express tools comand but the comands dont work
which is the file that is loaded to run the expresstool?
View 5 Replies
View Related
Nov 19, 2012
in layer translator the linetype scale does not work.
when i use layer translator, the resulted drawing comes with all layer ok but the linetypes scale does not.
View 1 Replies
View Related
Mar 28, 2012
I have Autocad Architecture 2012, and somehow after some manipulations with the interface the keyboard shortcuts ("L" for line, "M" for move, etc.) stopped working.
View 5 Replies
View Related
Jun 14, 2012
The boss wants to lock down the title block so no one can change the appearance of the "T"block but still wants the attributes to work.
Currently the tile block is a stand alone drawing which is used to start new drawings and is also in template format.
View 6 Replies
View Related
May 15, 2013
Don't know if I need to check some other setting or this is just the way it is. When I use PUBLISH to plot a set of drawings, I can't do anything else on the computer. If I try to type in any other software, it is interrupted and the cursor moved away from the software. I am able to type maybe a couple letters in any software, then the cursor goes away, put cursor back, type 2 letters, repeat, interrupt, cursor back, 2 letters etc..
Windows 7 PRO
Autocad LT 2012
View 9 Replies
View Related
Jul 19, 2013
I am upgrading the AutoCAD 2009 X 32 systems to the 2013 X64, and I have this vab code that won't work on the new system. I try to move the search path that contain the file up to the top and also got all the missing libraries, but the code still won't work.When I run the code it will give me error message like: compile error:
Function or interface marked as restricted, or the function uses an Automation type not supported in Visual Basic. The code work perfectly without any error on the old system so I sure the code is causing this error.
View 7 Replies
View Related
