AutoCAD 2010 :: Expresstools Don't Work In 2012?
Oct 20, 2011My ribbon an pull down Menu show a Express tools comand but the comands dont work
which is the file that is loaded to run the expresstool?
ADVERTISEMENT
AutoCAD 2010 :: Can't Work On Computer During PUBLISH LT 2012
May 15, 2013Don't know if I need to check some other setting or this is just the way it is. When I use PUBLISH to plot a set of drawings, I can't do anything else on the computer. If I try to type in any other software, it is interrupted and the cursor moved away from the software. I am able to type maybe a couple letters in any software, then the cursor goes away, put cursor back, type 2 letters, repeat, interrupt, cursor back, 2 letters etc..
Windows 7 PRO
Autocad LT 2012
AutoCAD 2010 :: Install 2012 And LT 2012 On Same Computer?
Mar 29, 2012Is this supported by Autodesk, and will installing both products create any issues?
View 3 Replies View RelatedAutoCAD 2010 :: Open And Create A Drawing In 2012 From Visual Basic 2010
Jul 1, 2012I'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:
1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.
2. I wrote this in the heading of the form's
- Imports Autodesk.AutoCAD.Interop
-Imports Autodesk.AutoCAD.Interop.Common
3. In the event Click of the Button1 I put this:
Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application
AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application
Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document
acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2
'Draw a line
Dim PT1(2) As Double
[code].....
AutoCAD 2010 :: 2010 Through 2012 Freezing When Using Open - Windows 7
May 23, 2012I recently loaded several versions of AutoCAD on to a Windows 7 machine. ALL versions will open a drawing if double-clicked from windows explorer, but if I try to open through AutoCAD, the program freezes as soon as I click on the "Open" button. This is true for AutoCAD 2010 through 2012.
Machine Specs:
Dell Optiplex 990
250GB HD
8GB Ram
I7-2600 proc
AMD Radeon HD 6670 (1Gb) Video Card
I also cannot open multiple instances of ANY version of AutoCAD in Windows 7.
AutoCAD LT :: Dynamic Blocks Won't Work In 2012
Nov 15, 2013I have an employee in our office with Autocad LT 2012, none of our dynamic blocks work on his machine? We have another machine with Autocad LT 2009 and the blocks work just fine? I can create dynamic blocks on the the machine, but when I close out of the block editor, none of the dynamic block grab-point show up. Is there a setting or somthing that needs to be turned on?
View 9 Replies View RelatedAutoCAD Map 3D :: Connection 2012 To ArcSDE Does Not Work
Sep 12, 2011Ive recently upgraded from AutoCAD map 2011 to 2012. But my connection to ArcSDE doesnt seems to work anymore.
My connection is the same as with 2011 using the pe.dll, sde.dll, sg.dll files.
Getting this message:
Unable to establish connection to provider.
FDO Provider entry point function 'CreateConnection' returned NULL.
AutoCAD Inventor :: Emboss For Engraving Can't Work - 2012?
Oct 2, 2012The subject basically says it all. I am trying to emboss two words onto a solid model. Unfortunately it keeps failing. I am copying this model off of U-Tube models "LED LAMP"
How to use emboss feature and engrave the words "LED LAMP" On the centre of the top of my solid model part. Top View reads vertically going up the way.
save it and send it back or explain why it keeps failing.
edit part 8. Then start the Emboss process. 1/64 = Depth. Flat White colour. Following the video on youtube they use engrave from face then reverse the direction the arrow points towards the model. Then OK. That's the way I am showed it and I can't get it to engrave.
AutoCAD Inventor :: 2012 - Insert Gear Won't Work
Jan 13, 2012I have a student account.
1. Start new assembly
2. I save my project
3. I click in "Sput Gear" and nothing happen.
AutoCAD Inventor :: 2012 IPart Does Not Work In 2013
May 6, 2012Got a rather large ipart that I haver been using in 2013. When I try to check this in, Inventor runs through the "analyzing members" thingy and fails about the 8000 member mark. Actually get a CER.
View 9 Replies View RelatedAutoCAD Civil 3D :: Swapping Network Parts Will Not Work In 2012
Jun 1, 2012I'm trying to swap one type of inlet for another. I can swap the type-13 to a type-R but when I try to swap it for a double type-13 it reverts to the single type-13. This is happening with a 7' manhole as well. I can swap a 6' for a 4' or an 8' but it will not swap to a 7', it reverts to a 6'. Is there something in the catalog for this that preventing the swap?
View 5 Replies View RelatedAutoCAD Inventor :: Auto-drop Doesn't Work In 2012
Sep 19, 2011Im working with IV2012 and my autodrop feature doesn't work altough the checkbox in the content center is checked on. i can't seem to find a solution on my own.
As far as I know the feature has never worked since I went from IV2011 to IV2012. (alot of troubles in the beginning btw, most of it is gone since service pack installed)
AutoCAD Civil 3D :: Copy Line-work From 2012 To 2009
Sep 26, 2012I go back and forth between older drawings in 2009 a lot while my current drawings are in Civil 3d 2012. Is there a way to copy linework from a Civil 3D drawing into my 2009 drawing easily. I used to be able to copy and paste between drawings but that doesn't work between these versions. Right now I have to wblock out the linework and open that new drawing and save as 2004 then import it into the old drawing.
View 1 Replies View RelatedAutoCAD Inventor :: 2012 - Work Point In DXF Of Sheet Metal Part
Jul 16, 2012We have a custom-made sheet metal punch consisting of a 5x5 matrix of 1/8" holes. We export flat patterns from Inventor as DXFs.
We normally make DXFs by creating a view of the flat pattern on a blank IDW template (no border, no title block, nothing) and export that view as a DXF. This lets us orient the view at will, unlike right-clicking on the flat pattern in the browser and selecting Save Copy As.
When the sheet metal guy assigns tooling in his software, he needs to get each punch to "lock onto" the corresponding feature in the DXF. Normally this isn't a problem, but it has been with this gang punch. The center hole of the punch needs to lock onto the correct hole in the DXF, and it can't always seem to do it. I've sat alongside the guy as he does this, and in his software the centers of the circles show up as dots/points. But on this punch, there isn't necessarily a dot in the center of every circle, and it's possible that the center hole, which really needs the dot, won't have one.
I've come up with a workaround for this: a work point in the IPT. In the attached part, it's feature Tooling1. The sheet metal guy confirms that if I include the work point in the DXF as a point (in the AutoCAD sense), he can lock onto it. However, I find that if I generate a DXF from the flat-pattern IDW, the point is lost. If I generate an ACAD DWG from the IDW and save the DWG as a DXF, the point comes through in the DXF. But that's an extra step.
Is there a way to export directly from IDW to DXF and not lose the work point? Or is this as good as it gets?
For the sake of simplicity, the attached part has no bends. I realize that if I did, I'd have to re-create the points in the flat pattern, but that's another discussion.
AutoCAD Inventor :: Content Service Doesn't Work With New Profiles (2012)
Dec 12, 2011I'm a computer tech in a school that uses Inventor 2012. After cloning the computers, if I log in using a profile that was there before, I can access the content service but when a student logs in, nothing happen when trying to access it. I looked for the .exe.config files in the Inventor bin directory but could not find anything related to the computer name. The structure is different in this version.
View 2 Replies View RelatedGIMP :: Resynthezier / Can't Make It Work (2012)
Nov 15, 2012Suse 12.2, gimp 2.8-git branch installed in ~/gimp, compiled resynth-git prefixed there, too.Can call "heal selection" and Resynthesize, but the do nothing.
Example: I have a white square with one corner missing, the corner shows alpha. Now I select all the alpha, then call filter-map-resynth, tell it to look 50pixel further, run it, it calculates for a minute, munches cpu and all, and then...Nothing.The layer is correct, it has an alpha channel, alpha is not locked.Tried both heal and resynth.
-----BEGIN GEEK CODE BLOCK-----Version: 3.12GCS d--(+)@ s-:+ a C++++ UL++ P+>++ L+++>++++ E-- W++ N o? K-w--(---) !O M+ V- PS+ PE Y++ PGP t++(---)@ 5 X+(++) R+(++) tv--(+)@ b++(+++) DI+++ D- G++ e* h>++ r* y?------END GEEK CODE BLOCK------
AutoCAD 2010 :: 2012 Will Not Respond
Mar 18, 2013I have been having problems with Autocad 2012 (running on Windows 7/64bit) where it keeps getting hung up and I get the spinning wheel and the (not responding) message... I notice this happens most often when I am editing attributes of a block, editing text (by double click or through the properties window), or printing to PDF. I am unable to shut down autocad, Windows 7 will not let me end the process in the task manager, and I have to shut off the power on my laptop to force it to shut down. On the few occasions where I got the window to close, Autocad would not re-open, the start up screen would just get stuck at Initializing..
View 4 Replies View RelatedAutoCAD 2010 :: 2012 - How To Disable F1
Nov 20, 2011how to disable F1 in autocad 2012. How to do this in 2012 version. The F1 key doesn't appear in the CUI under keyboard shortcuts. My internet connection goes off and on and when it's off hitting the F1 key freezes my computer. so I need to disable it.
View 4 Replies View RelatedAutoCAD Map 3D :: Can't OpenDWG In 2010 From 2012
Nov 16, 2011I have saved back a drawing to 2007 in Map 3D 2012. I have tried to open it in AutoCAD Map 3D 2010 but get a fatal error:
"Exception in ird.arx ARX Command
Unhandled Exceptiion 10002000 (Access Violation Reading 0xa433aef8) at address 5E2D89DCh"
"AuotCAD Error Aborting
FATAL ERROR: Unhandled Access Violation Reading 0xa573b9c0 Exception at 5e28a140h"
What does this mean and what can I do to be able to open the drawing in AuotCAD Map 3D?
AutoCAD 2010 :: Annotative Hatch In 2012?
Jan 27, 2012I use a user-defined hatch often - just 45 degree lines say 4" apart in model space. In 2009 I could make this annotative and the paper distance between those lines would remain the same as long as I made sure the hatch had the appropriate annotive scales associated with it.
In 2012 when I try to do the same thing, the hatch stays at the same Model space spacing in every viewport even though the viewports have different annotative scale AND the hatch has matching annotative scales.
AutoCAD 2010 :: 2012 Will Not Install On Windows 8
Oct 11, 2012I've downloaded it several times, but it seems it just will not install.
heres the log:
2012/10/11:15:59:33 midnit_angel13 ANGEL === Setup started on ANGEL by midnit_angel13 ===
2012/10/11:15:59:33 midnit_angel13 ANGEL Launch
2012/10/11:15:59:47 midnit_angel13 ANGEL === Setup ended ===
[Code].....
AutoCAD 2010 :: (2012 MEC) Embed PDF / Images To DWG?
Dec 16, 2011why with autocad 2012 mechanical, I can't no more embed PDF or Images to a drawing but only load it as references, linked to a file path?
Previously I used Autocad 2009 MEC and there wasn't this problem.
I shall fix this because, when I load a dwg to our company management system, the pdf or images shall be embed to the dwg file.
If I load the pdf as OLE Object, it doesn't lock the view and the pdf zoom canghe with the dwg zoom, so it is acceptable.
AutoCAD Inventor :: Compatibility Between 2012 And 2010?
Nov 10, 2011I´ve started at a school which is using autodesk inventor 2010, but on my computer I have autodesk inventor 2012, and I can´t find the way to open the homework I do at home on the school computers.
It is supossed that my inventor 2012 saves the files in 2010 format as I can read on the settings, but when I open it on the 2010 in shows me an error message about that it´s not possible open this file. Also I´ve tried to save as 2007 format, but it can´t open it.
AutoCAD 2010 :: 2012 Keeps Freezing And Crashing?
Dec 7, 2012I'm having a problem with everytime i try to use the copy,move or rotate command on my autocad 2012 i ended up with a delay and if i click the mouse it freezes and then say autocad not responding then it shots down.
View 2 Replies View RelatedAutoCAD 2010 :: Plotting An Airfoil In 2012?
Jan 15, 2012I need to be able to import the airfoil geometry of a NACA 2412 airfoil. I know how to get the XY coordinates but I don't know how to import these points (as a .txt file?) into ACAD. What function would I use? Spline? If so how do I get it to draw all the points I have? I need to then extrude the shape to be able to mill airfoil sections...that part I can figure out....just need to import the points to get a nice curve.
View 9 Replies View RelatedAutoCAD 2010 :: 2012 MEP Cursor Disappears
Oct 3, 2012At no specific time when using ACAD 2012 MEP the cursor disappears. cross hairs and all. the only way to get them back is to close ACAD and open it back up.
View 4 Replies View RelatedAutoCAD 2010 :: Wipeouts In 2012 Cannot Be Modified?
Apr 20, 2011Upgraded to 2012 yesterday. Today I've noticed that WIPEOUTs no longer have grips when they are selected. It also seems as though they cannot be modified via the STRETCH command.
All I can think of off the top of my head is to explode the wipeout, isolate the elements, reassemble them as a polyline, modify as desired and then recreate the wipeout from the polyline. But that's hardly efficient.
No grips wasn't too bad, but not responding to a stretch seems stupid. We use wipeouts in many of our blocks. We may take one block and modify it to create another similar block. Recreating the wipeouts because they wouldn't stretch or couldn't be easily modified to adapt to the new geometry will be a real waste of time.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
AutoCAD 2010 :: Using 2011 And 2012 On The Same Drawings?
Aug 27, 2012We are using AutoCAD 2011 and AutoCAD 2012 on the same drawings. It is slowing the drawings down in AutoCAD 2011. There is at least one person that only has AutoCAD 2012 on their machine.
View 2 Replies View RelatedAutoCAD 2010 :: 2012 Freezing On Hatching
Mar 9, 2012My AutoCAD 2012 freezes almost evertime when I do hatching. It doesnt matter the size of the drawing nor the type of hatch i use. It freezes while I try to pick boundary points. When it freezes, I cant even move the curser. I need to restart it from the hub.
What could be the issue? Whats spec on my computer do I need maybe?
Also with the Recovery Management, it takes like forever to try and recover a drawing.
AutoCAD Inventor :: Use 2012 With Vault 2010?
Jan 18, 2012We are currently running Inventor 2010 Professional (64-bit) on our computers with Vault 2010 on a remote server, but are ready to upgrade to Inventor 2012 Professional. Will we be able to continue to use Vault 2010, or will our Vault (ADMS?) need to go to 2012 also?
A side question, what are the strategies to update the files in the Vault to 2012? As needed? Setup an automated task?
AutoCAD 2010 :: View Freezes In 2012?
Dec 14, 2011My view is freezing in Architecture 2012 and when I close out of my drawing and open it again, the problem is fixed. What am I doing to make it freeze? It seems like it does it the most if I am in isometric. Also, I am working in a project manager and there are no Xref's attached.
View 4 Replies View Related