AutoCAD 2010 :: (2012 MEC) Embed PDF / Images To DWG?
Dec 16, 2011
why with autocad 2012 mechanical, I can't no more embed PDF or Images to a drawing but only load it as references, linked to a file path?
Previously I used Autocad 2009 MEC and there wasn't this problem.
I shall fix this because, when I load a dwg to our company management system, the pdf or images shall be embed to the dwg file.
If I load the pdf as OLE Object, it doesn't lock the view and the pdf zoom canghe with the dwg zoom, so it is acceptable.
View 5 Replies
ADVERTISEMENT
Dec 5, 2013
I have a user that is getting what appears to be streaks on his drawings.
The video card has the latest driver.
I ask how often this happens and he states:
Almost every time I have a large 3d drawing ..or multi 3d drawings open (which is often the case)
View 8 Replies
View Related
Dec 13, 2013
As I can't bind a Tiff file (X-Ref) within AutoCad 2010, Is there another way to fully embed a tiff file into drawing file, so I only have to email one file to my client?
View 2 Replies
View Related
Mar 13, 2012
We had a client who could not open our drawings that had linked Excel spreadsheets in them even though we supplied the spreadsheets. The drawings would crash AutoCAD when they tried to open them.
My solution was to open the drawings, pick on the Linked Spreadsheet OLE in the drawing, Ctrl+C (Edit > Copy) then I Edit > Paste Special > As Image. I would paste it in at the lower left corner of the existing spreadsheet.
I set the properties of the new OLE so the Lock Aspect Ratio was Off or No and drag the upper right corner of my newly inserted image to the upper right corner of the existing linked spreadsheet so it would be a perfect match.
I then erased the existing linked spreadsheet.
Now they can open the files and we don't need to include the spreadsheet when we send the files.
[URL]....
View 2 Replies
View Related
May 5, 2013
Write an lisp file that would embed a tif image
View 5 Replies
View Related
Sep 24, 2013
I am running Photoshop CS5 on a Mac 10.8.4.I have basic photoshop experience. My designer has left me in the lurch at a daedline and I need to get some material to the printer ASAP.The design is finished.The printer wants all the text outlined and the images embedded then a "high quality PDF" submitted to print.how to outline text and imbed images. (I know how to savw to PDF).
View 1 Replies
View Related
Sep 27, 2012
I have been tying to figure out how I could easily embed multiple linked images easily. I have some 1000 .svg images which have about 1-7 .tif images linked in to them. I now need to get those links embedded and becouse of the amount of images I'm hoping to make an action out of it.
View 3 Replies
View Related
Mar 29, 2012
Is this supported by Autodesk, and will installing both products create any issues?
View 3 Replies
View Related
Sep 27, 2012
I have been tying to figure out how I could easily embed multiple linked images easily. I have some 1000 .svg images which have about 1-7 .tif images linked in to them. I now need to get those links embedded and becouse of the amount of images I'm hoping to make an action out of it. I have a script to embed single image in .svg but haven't have luck with multiple embeddings.
View 9 Replies
View Related
Jul 1, 2012
I'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:
1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.
2. I wrote this in the heading of the form's
- Imports Autodesk.AutoCAD.Interop
-Imports Autodesk.AutoCAD.Interop.Common
3. In the event Click of the Button1 I put this:
Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application
AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application
Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document
acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2
'Draw a line
Dim PT1(2) As Double
[code].....
View 2 Replies
View Related
May 23, 2012
I recently loaded several versions of AutoCAD on to a Windows 7 machine. ALL versions will open a drawing if double-clicked from windows explorer, but if I try to open through AutoCAD, the program freezes as soon as I click on the "Open" button. This is true for AutoCAD 2010 through 2012.
Machine Specs:
Dell Optiplex 990
250GB HD
8GB Ram
I7-2600 proc
AMD Radeon HD 6670 (1Gb) Video Card
I also cannot open multiple instances of ANY version of AutoCAD in Windows 7.
View 3 Replies
View Related
Sep 26, 2012
One of the clients at my work is experiencing difficulty printing using AutoCAD LT 2012. When he prints, only a blank page comes out of the printer. I have tested the printer and I am sure it works properly. It printed both a Windows test page and a color photo with no problems, which is leading me to believe that he has a setting within the program that should be changed.
View 3 Replies
View Related
Mar 26, 2012
We frequently create PDF files using the DWGtoPDF.pc3 . We have a lot of drawings with a raster background image. In version 2010 I could create a PDF and the raster image would show up. We recently upgraded to Map 3D 2012 and although the raster shows up in the preview, it does NOT get plotted to the PDF.
View 9 Replies
View Related
Mar 18, 2013
I have been having problems with Autocad 2012 (running on Windows 7/64bit) where it keeps getting hung up and I get the spinning wheel and the (not responding) message... I notice this happens most often when I am editing attributes of a block, editing text (by double click or through the properties window), or printing to PDF. I am unable to shut down autocad, Windows 7 will not let me end the process in the task manager, and I have to shut off the power on my laptop to force it to shut down. On the few occasions where I got the window to close, Autocad would not re-open, the start up screen would just get stuck at Initializing..
View 4 Replies
View Related
Nov 20, 2011
how to disable F1 in autocad 2012. How to do this in 2012 version. The F1 key doesn't appear in the CUI under keyboard shortcuts. My internet connection goes off and on and when it's off hitting the F1 key freezes my computer. so I need to disable it.
View 4 Replies
View Related
Nov 16, 2011
I have saved back a drawing to 2007 in Map 3D 2012. I have tried to open it in AutoCAD Map 3D 2010 but get a fatal error:
"Exception in ird.arx ARX Command
Unhandled Exceptiion 10002000 (Access Violation Reading 0xa433aef8) at address 5E2D89DCh"
"AuotCAD Error Aborting
FATAL ERROR: Unhandled Access Violation Reading 0xa573b9c0 Exception at 5e28a140h"
What does this mean and what can I do to be able to open the drawing in AuotCAD Map 3D?
View 4 Replies
View Related
May 2, 2011
I am facing the following problem in Autocad 2012:
I have set all the drawings I want to print in the Sheet Set Manager and I publish everything to plotter for unattended plotting. However, when publishing the same drawings to PDF using the SSM, all raster images do no print. If I open each drawing and plot the same layout on its own, everything prints just fine. So I think there is something wrong when publishing through the SSM.
The funny thing is that before using Autocad 2012 I was using version 2010 and everything worked as expected, the raster images were printed no matter where I was printing from.
View 1 Replies
View Related
Jan 27, 2012
I use a user-defined hatch often - just 45 degree lines say 4" apart in model space. In 2009 I could make this annotative and the paper distance between those lines would remain the same as long as I made sure the hatch had the appropriate annotive scales associated with it.
In 2012 when I try to do the same thing, the hatch stays at the same Model space spacing in every viewport even though the viewports have different annotative scale AND the hatch has matching annotative scales.
View 6 Replies
View Related
Oct 11, 2012
I've downloaded it several times, but it seems it just will not install.
heres the log:
2012/10/11:15:59:33 midnit_angel13 ANGEL === Setup started on ANGEL by midnit_angel13 ===
2012/10/11:15:59:33 midnit_angel13 ANGEL Launch
2012/10/11:15:59:47 midnit_angel13 ANGEL === Setup ended ===
[Code].....
View 2 Replies
View Related
Oct 20, 2011
My ribbon an pull down Menu show a Express tools comand but the comands dont work
which is the file that is loaded to run the expresstool?
View 5 Replies
View Related
Nov 10, 2011
I´ve started at a school which is using autodesk inventor 2010, but on my computer I have autodesk inventor 2012, and I can´t find the way to open the homework I do at home on the school computers.
It is supossed that my inventor 2012 saves the files in 2010 format as I can read on the settings, but when I open it on the 2010 in shows me an error message about that it´s not possible open this file. Also I´ve tried to save as 2007 format, but it can´t open it.
View 9 Replies
View Related
Dec 7, 2012
I'm having a problem with everytime i try to use the copy,move or rotate command on my autocad 2012 i ended up with a delay and if i click the mouse it freezes and then say autocad not responding then it shots down.
View 2 Replies
View Related
Jan 15, 2012
I need to be able to import the airfoil geometry of a NACA 2412 airfoil. I know how to get the XY coordinates but I don't know how to import these points (as a .txt file?) into ACAD. What function would I use? Spline? If so how do I get it to draw all the points I have? I need to then extrude the shape to be able to mill airfoil sections...that part I can figure out....just need to import the points to get a nice curve.
View 9 Replies
View Related
Oct 3, 2012
At no specific time when using ACAD 2012 MEP the cursor disappears. cross hairs and all. the only way to get them back is to close ACAD and open it back up.
View 4 Replies
View Related
Apr 20, 2011
Upgraded to 2012 yesterday. Today I've noticed that WIPEOUTs no longer have grips when they are selected. It also seems as though they cannot be modified via the STRETCH command.
All I can think of off the top of my head is to explode the wipeout, isolate the elements, reassemble them as a polyline, modify as desired and then recreate the wipeout from the polyline. But that's hardly efficient.
No grips wasn't too bad, but not responding to a stretch seems stupid. We use wipeouts in many of our blocks. We may take one block and modify it to create another similar block. Recreating the wipeouts because they wouldn't stretch or couldn't be easily modified to adapt to the new geometry will be a real waste of time.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
View 9 Replies
View Related
Aug 27, 2012
We are using AutoCAD 2011 and AutoCAD 2012 on the same drawings. It is slowing the drawings down in AutoCAD 2011. There is at least one person that only has AutoCAD 2012 on their machine.
View 2 Replies
View Related
Mar 9, 2012
My AutoCAD 2012 freezes almost evertime when I do hatching. It doesnt matter the size of the drawing nor the type of hatch i use. It freezes while I try to pick boundary points. When it freezes, I cant even move the curser. I need to restart it from the hub.
What could be the issue? Whats spec on my computer do I need maybe?
Also with the Recovery Management, it takes like forever to try and recover a drawing.
View 3 Replies
View Related
Jan 18, 2012
We are currently running Inventor 2010 Professional (64-bit) on our computers with Vault 2010 on a remote server, but are ready to upgrade to Inventor 2012 Professional. Will we be able to continue to use Vault 2010, or will our Vault (ADMS?) need to go to 2012 also?
A side question, what are the strategies to update the files in the Vault to 2012? As needed? Setup an automated task?
View 1 Replies
View Related
Dec 14, 2011
My view is freezing in Architecture 2012 and when I close out of my drawing and open it again, the problem is fixed. What am I doing to make it freeze? It seems like it does it the most if I am in isometric. Also, I am working in a project manager and there are no Xref's attached.
View 4 Replies
View Related
Aug 24, 2012
I have downloaded AutoCAD 2012 and when I try to open it my computer automatically shuts off without even openig AutoCAD. I tried downloading the newest version of AutoCAD 2013 and it does the same thing. Inventor fusion seems to open and work properly but not AutoCAD.
View 1 Replies
View Related
Oct 4, 2011
My company just got new computers, I've loaded 2012 SP1 and our lisp comands on every machine. After a plot, when someone goes to save and close the drawing, AutoCAD crashes. It does not matter which plot device is used, the result is the same. This includes the plot devices included in AutoCAD. I have reinstalled autocad on one machine, no lisp commands, same result. I have already tried some of the fixes proposed in other threads, nothing has worked.
System:
Win7 64 bit
i7 930
6Gb RAM
Radeon HD 6450
View 9 Replies
View Related
