Photoshop :: Why Trim Wouldn't Work In CS5
Nov 26, 2013why trim wouldn't work in cs5? It works if the background is white, but anything else and it doesn't work.
View 1 Replies
ADVERTISEMENT
VideoStudio :: Pro X4 Wouldn't Work - Not Capture Video
Dec 3, 2012I bought a new computer (Dell E5520 laptop with Windows 7) and transfered all my programs/data; Video Studio Pro X4 wouldn't work - would not capture video. I un-installed the program. When I try to install VS ProX4 on my new computer from the disc I get a small blank window and a flashing diaglogue box pops up so quickly I can't read it. I have run virus scans and removed all identified threats. I am running a Intel Core i5, have 4GB Ram and 500GB disk. Installation and operations were great on my old system running XP.
View 2 Replies View RelatedAfter Effects :: Didn't Have Verdana And Interface Wouldn't Work Without It
Jul 23, 2013Just download After Effects CC to my desktop and once I opened the program it told me that I didn't have Verdana and the interface wouldn't work without it. It also said that I could replace the font but didn't give me any option and continued by crashing.
View 2 Replies View RelatedAutoCAD LT :: Trim And Extend Don't Work Intermittently?
Sep 6, 2013This problem has cropped up in the last few months. It only happens intermittently.
Typically I select Trim, or Extend command, right click to select All rather than a specific object, then selcet the objects to be trimmed or extended.
Sometimes though, the All command is not activated and I have to select the object to be trimmed or extended to, then select the objects to trim, etc. Then the next time I right click for All it works.
AutoCAD 2010 :: Trim And Extend Will Not Work
Feb 14, 2013I am using Autocad 2010. I have been using 2008, but recently upgraded. I have a project that one particular file is driving me nuts! I can not use trim or extend on any existing line work. However, if I draw two non intersecting/crossing lines and ust the 'TR' command it works fine. I have checked to see if all lines are in the same plane and the appear to be. The only way I can trim or extend is if I use the 'Flatten' command.
View 6 Replies View RelatedCorelDRAW X4 :: Use TRIM Tool On Top Of Vector Doesn't Work
Jun 11, 2011Half the time I use TRIM tool vector on top of vector it doesn't work.
I can't seem to figure out why in some cases trim works and in others it simply puts the top object under the bottom one instead of trimming it from the bottom one.
Does same thing in X3 X4 and X5?
I've tried everything from making sure both were filled with solid color - all curves closed, nothing else grouped with them - nothing - sometimes I have to try a couple times doing same thing and it will work, other times not at all - even after trying a save (which sometimes works)
Both top and bottom show on layer one in properties too!
After Effects :: Left And Right Bracket Does Not Work To Trim MacOS
Feb 7, 2014I have an iMac computer with Norwegian Keyboard.
I cannot get the left and right bracket to work - so maybe it is some other keyboard command I have to do to make it work?
Photoshop :: Why Wouldn't Text Look Like Color You Chose?
Jun 9, 2006I notice this happen here and there. I'm typing some text, and the color being typed is nothing like the color I just chose and I see in foreground. Actually you see the color three places, foreground, little box in option bar and character palette.
View 1 Replies View RelatedAutoCad :: Configure Objects So They Wouldn't Appear In Print
Oct 23, 2012What is the way to configure objects so they wouldn't print? I want to see them in the model/layout, but avoid having them in the PDF.
View 4 Replies View RelatedLightroom :: Wouldn't Open Previews On Imported Photos
Aug 7, 2013I have Lightroom 5 and a Mac computer..Uploaded photos via card reader to Computer.Lightroom Opened but would not show previews. - said show source - would not open the previews on the imported photos
When I tried to activate the source to upload my photos - all when blank after 1 second of showing information (Photos) that were the previews. - then went blank.I stopped the process and ejected the card correctly through the finder. Thought I would try importing via image capture.
This was also a problem as the previews only showed as a flash of a second.I also notice that for some reason Lightroom 4 keeps on opening when importing photos and not Lightroom 5 - Though Lightroom 5 opens up when I edit other photos.
Photoshop :: Trim Marks In CS4
Aug 5, 2013Is it possible to make trim marks in Photoshop CS4, so my client will have them on my artwork, ready for the printer he uses?
View 6 Replies View RelatedPhotoshop :: How To Trim Paths?
Nov 10, 2005The thing is this: I have some paths (shapes) that I want to combine into one path and trim all the excess path lines. I can put the paths into the same path-layer by just copying/pasting that works fine, but the paths are still NOT really combined.
I have made an example to illustrate my point, please have a look at that.
1) I've created paths 1 and 2
2) I combined them into another path-layer
3) Thought the thing I need is anchor points at the intersection so I added those
4) When I delete the anchor points whithin the combined shape, the whole shape distorts and it shows that it really is not a combined path but just two separate paths in the same layer! I can't seem to trim the red marked lines off the path.
My question basically is how to remove the red marked part of those paths and combine them into a 'really-one-path' shape that follows the outline of the combined shape?
I have tried to create an outline path by turning the combined path into a selection and then create a path from that selection, that doesn't produce a nice smooth path when the shape is more complex...
Photoshop :: Trim Transparency Is Not Working
Sep 16, 2013I have a few of layers that have transparency, and I want to save them out as Transparent PNGs. For whatever reason when I saved it as a transparent PNG it is exporting it bigger than it should. It doesn't trim them to the non transparent pixels, instead it renders them out at full size. I used both Save As and Save for Web commands, and neither are trimming the files. When I tried File>Scripts>Export Layers To Files…, 5 out of 6 work perfectly when exported as PNG, but only once. I used layers mask on the layers and I check this last layer multiple times even flooding it with black and then marqueed a random area in white, and it still exports it at canvas size and WONT crop the images to just the visible pixels. Basically it is NOT ollowing the Alpha.
I am in Photohosp CS6, and I am experiencing this issue on both MAC OS X and Windows.
Photoshop :: Bleed And Trim Marks
Mar 1, 2009I'm looking to put together a magazine in Photoshop CS2. The plan is to save single pages as PDF's, and combine them in Acrobat.
However I'm told I need to ensure I have bleed and trim marks - and I have no idea how to do these.
Photoshop :: Automatically Crop / Trim
Dec 15, 2006Is there a way to have Photoshop automatiaclly trim out excess background of an image captured from a camera? I am currently taking a bunch of pictures agast a white backgron and have to crop them manaually.
View 1 Replies View RelatedPhotoshop :: PS CS3: Trim Layer Content That
Sep 4, 2008I have a large picture that a part of which I have on a layer. The image itself is much larger than the layer itself. So when I chose transform, the edge marks/lines are way off the layer screen. I need to drag these layers to a new PS file of the same size and I dont want to bring over the entire huge image layer. Is there a way to have PS inverse select all alyer content not on the layer itself and trim it?
View 2 Replies View RelatedPhotoshop :: Pixel Ghosting When Using Trim Function
Feb 7, 2013Since re-installing CS5 Master Suite a couple weeks ago and have been having an issue when using the trim function. There seems to be a 1px pixel or alpha that is distorting the trim.
Photoshop Version:
Running CS5 Extended (12.0.4 #64)
Hardware: macbook pro retina connected to a thunderbolt monitor.
OS: OSX 10.8.2
Photoshop :: How To Eliminate (trim Off) Area Outside The Border
Jun 24, 2013I have a graphic of a card design and have added a graphic that goes off the outside border on the card. I've included a snapshot of the card showing the ribbon running outside the border. How do I eliminate (trim off) the part outside the border?
View 6 Replies View RelatedPhotoshop Elements :: Trim Audio In Slideshow?
Feb 13, 2013How can I trim the music in a slide show
View 1 Replies View RelatedPhotoshop :: Trim Line That Intersects Circle Like Spokes Away From A Hub?
Apr 29, 2012When I use the circle tool it trims the hub away from the spokes. How do I do the opposite, trim the spokes away from the hub? (Novice, CS3, XP)
View 2 Replies View RelatedPhotoshop :: Batch Action To Open Multiple PDF's Cropped To Trim Box And Then Flattened
Mar 15, 2013I'm trying to work out how to create an action in Photoshop CS4 to open multiple PDF files, cropped to the Trim Box, then flattened & saved as a PSD or tiff file. Is this possible? I'm hoping so as I have about 200 to run this same sequence on!
View 2 Replies View RelatedCorelDRAW X6 :: Trim Object At Once?
May 21, 2012[URL]
how to delete the certain parts of complex at once by using the single object above all of them.
CorelDRAW X4 :: How To Trim 2 Objects
Apr 26, 2011how to trim 2 objects. First one is a single line scribble on the background. Second object is a face silhouette. I select both object and try to trim the scribble line running thru the head, using "arrange/shaping" but can't select the function trim. The only one available is simplify, all others including trim are inactive.
View 14 Replies View RelatedAutoCAD VB :: How To Trim The Object
Sep 26, 2012How to trim the object using VB coding
View 3 Replies View RelatedVideoStudio :: Multi-trim With Audio
Nov 27, 2011Because i still don't have audio when loading a video in the timeline and go to projectmode. The audio is also not in the output file. It is when playing original clip in library and when in timeline choose the clip but not in project mode and output file.
Thats why i split audio and video in Virtualdub to wav (direct stream copy) and then load audio and video in VS4. Now i want to multi-trim the clip. But only the video is trimming the audio is not trimming with it so audio is off sync.How can one multi trim a video with the audio who is seperatly loaded in the audio track?
VideoStudio :: X5 - Relocating Trim Handles
Jan 15, 2013Version in use - X5 Pro Ultimate.This is about trim handles that seem to re-locate - from a clip to a whole project - for no obvious reason, and once it occurs the only fix is a program restart.
I have noted when working on projects that periodically the clip trim handles - those orange icons that sit at the end of the white clip strip timeline that appears in the view panel when clip mode is selected - will re-locate from the clip view to the project view. That is, they no appear in clip mode, but reappear when project mode is selected; and they then operate on the whole project. That's a trap - the first time it happened and I was trimming a clip, it trimmed the whole project. Ruined it completely, start again was the order of the day. Now, I keep an eye on that: when it happens there isn't an obvious way to get the handles back to the clip view, and the only option then is to NOT do any further changes, save the vsp and close VS down. Re-opening VS and re-loading the vsp breaks whatever condition caused the relocation of the trim handles, and gets back to condition where the trim handles being displayed in the clip view, and trimming of a clip can be done without damaging the whole project.
VideoStudio :: Simple Trim Without Re-compress?
Nov 30, 2011I have been trying for an hour to clip a few frames off the beginning of a video & save. I want to keep everythis as-is. Just trim & save. Everything I try requires recompiling & I loose a generation of quality. When I use "Save Trimmed Video" I get an error that says "Unable to get samples.(osErr=-9461)".
I just want to trim & save.
VideoStudio :: No Audio After Trim Clip In X4?
Mar 8, 2012I recently upgraded my Corel VideoStudio X2 to Corel VideoStudio x4 Pro. After removing the old program and installing the updated version,I then restarted my computer and attempted to use it to edit a video. I placed the youtube video that I'd converted to AVI format into the timeline on the program. I then proceeded to attempt to trim <cut> the video at the first place that needed to be fixed and also at the end of the area to be repaired. After fixing it,I then reset the video to the beginning and watched for the expected changes. Much to my surprise,there was audio all way to the first cut spot on the video and absolutely nothing for the entire rest of the video;even in the cut or changed area. I was naturally puzzled as I never had this issue with the previous version. I then checked all my system audio controls and those of the program to make sure that nothing had changed or been accidently muted;including all audio settings were at proper levels,and everything was on and working as should be. I then checked the device manager to see if I found any yellow "?" marks on it for some strange reason to insure that all drivers were installed correctly;and found nothing amiss there. I then went to youtube and played a video and then a music CD in my computer to insure that my audio system was still functioning correctly and,as expected,they both worked fine and gave me audio output. Puzzled,I closed out the VideoStudio and all programs and re-started my computer. I then re-opened VideoStudio and tried again. I placed the same video on the timeline and played it without any changes. It played perfectly fine and I had audio thru-out the entire video. I then re-tried to adjust the video by clipping it and once again...no sound for the rest of the video. I re-checked all drivers and audio connections without finding anything amiss. I even tried other videos that I'd converted to AVI format in the program timeline,that I still had on computer with the same exact results after picking a spot and clipping them as before.....no audio. I even tried clipping the video in different spots;both by clicking on the scissors and with the editing options located in the program interface with the exact same results...no audio after the cut. I searched thru the program interface. I enjoyed the previous version immensly so was looking forward to using the updated version;but can't unless I can get this problem reesolved. Worse case,I can go back to the old version that worked fine for me but I hope not to.
View 2 Replies View RelatedVideoStudio :: X6 Pro - Multi Trim With MOV Files
Aug 17, 2013I've just started using VS X6 Pro, after not doing much with video for a few years. I previously used VS 10 and 9.
We have a canon P&S camera which produces HD H264 mov files which I am editing for the first time and getting a weird problem. The files play fine on the time line, but when I try to use the multi-trim tool I get two issues:
1. Audio is badly out of sync in the multi trim window, like 1/2 second in a 20sec clip. (again, same clip plays fine on the time line)
2. When I make a multiple trim, the "play trimmed video" button does not work properly. eg if I make two selections from a clip with a gap between them, play trimmed video plays the whole clip to the end, then returns to the start of the second trim selection and plays that.
If I load up an mpeg2 .avi clip, the multi-trim tool works perfectly: audio is in sync and it correctly plays only the trimmed sections.
I have enabled smart proxy on the clips, and following another hint in a thread here, I downgraded quicktime to 7.5.5 but neither worked. Also I have installed sp1.
AutoCAD Civil 3D :: How To Trim Alignment
Jan 10, 2014is there a way to trim an alignment?
View 3 Replies View RelatedAutoCAD Inventor :: Trim A Spline
Jan 26, 2012Here I enclose file Cam_Profile.ipt, this is a spline curve made from an Excel matrix with 670 points in 3 decimals accuracy (VBA editor)
Extruding is not possible because of self intersecting path.
I want to trim both two free ends from the intersection and also close the intersection for extruding this profile. However ....., without displacement of any current point in the perimeter of the closed spline!