Here I enclose file Cam_Profile.ipt, this is a spline curve made from an Excel matrix with 670 points in 3 decimals accuracy (VBA editor)
Extruding is not possible because of self intersecting path.
I want to trim both two free ends from the intersection and also close the intersection for extruding this profile. However ....., without displacement of any current point in the perimeter of the closed spline!
I'm trying to create an external involute spline (ANSI B92.2M) Fillet Root Side Fit 26.9mm x 1 mm x 26 teeth x 38 mm long using the spline generator with Inventor 2012. I created a test shaft"M-182-AMA.ipt" that is Ø26.9 mm x 38 mm long with 1 mm radius on each end of shaft.
I use the following steps:
1. After creating component "M-182-AMA.ipt" I select Design tab>>Power Transmission>>Involute Spline.
2. A window appears that has the caption "Involute Splines Connection Generator".In the Dimensions section I choose "Splines Type: ANSI B92.2M - 37.5 deg, Fillet Root, Side Fit, 26 x 1.00 x 38 x 5H/5h" and change the Length to 38 mm.
3. In the Shaft Groove section I use Create new, and I push the Reference 1 button that turns blue, I then select the od feature from the model and I get an error(see attached pic "error1.jpg).
I changed the 26.9mm od to be 27mm and it still gave me the error.
Work Station : Dell Precision R5400
OS: Windows 7 Business 64 Version 6.1.7601 Service Pack 1 Build 7601
Processor Intel(R) Xeon(R) CPU E5405 @ 2.00GHz, 1995 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date Dell Inc. A10, 4/30/2012
Graphics Display Card: ATI FirePro V4800 (FireGL V) 1.00 GB Adapter RAM
Computer Memory: 8 GB ECC RAM
I have created a shaft and splined one end of it successfully. The shaft is the same diameter at both ends and I need to spline the other end as well but when I try, I get the following error messages, Cannot create iFeature. Not possible to create shaft groove. Splining the first end went without a hitch but Inventor absolutely refuses to spline the opposite end of the shaft. The shaft diameter is correct for the spline I have chosen (same as the major diameter)
View 1 Replies View Relatedhow do i trim away the section on RevolutionSrf1 underneath features RevolutionSrf2 and LoftSrf1 ?
Inventor 2012
I have a group of Points coming from a step.file. So I don't have their coordinates, excel list or anything else. Just the step file. Around 100 points. There is a line between each 2 consecutive points.
Is there any way to select all the points and create a complete spline? Or even to select all the points and create tangent arcs between all of them?
In Vers 2013, IV finally added the ability to manipulate a [3D] spline by dragging the control handles (way behind the curve on this one).
However, dragging "a" control handle causes several of the other control handles to shift as well. Puts a big limit on the ability to customize yout path. Splines are supposed to be one of the unrestricted free form tools for modeling.
Is there any way to turn this "feature" off ? I need and should be able to have discrete control on each control handle. (I had this way back in SW)
Also, there is no 'axis' for the control points unless you count the const lines that connect the control points and I don't. I should be able to select an axis and be able to shift the direction and level of influence of each side of the control point axis.
I have a spline that runs through about 70 points to make the perfect line. But when I rotate the sketch the spline turned from green to black and is no longer recognised as a boundary. I then have to delete the black line and re-draw. How do I keep the spline green and usable?
View 3 Replies View RelatedWhen attempting to break the link on a projected spline, the spline type reverts to what appears to be the legacy AutoCAD type of spline (see image).
Is there a way around this other than drawing a new spline on top of the projected geometry and working with the new spline?
The idea was to project the shape, break the link, then ,ove the shape to a new location in preparation for a lofting procedure.
I am having trouble with a part that I am working on. Trying to trim to the tangent edge. I cant post the part that I am actually using, but here is an example of a similar problem. In the attached file, open the "Negative Part.ipt". The sketch 2 contains a line (unconstrained). I need this line to be tangent with the curve below it.
I can project the edge of the curve to my sketch plane, but not the tangent of the radius.
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 3.60ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1.1 (update1)
Vault Basic 2013, SP1
I need to Trim or Extend Sketches. Is there any API to access the Trim/Extend Tool?
View 1 Replies View RelatedIs there a way to disable visibility of spline end squares, in a sketch?
View 3 Replies View RelatedCrashes on a simple extrusion... VERY basic spline...
(When I click extrude... I doubt it's even a complete closed shape yet)
I am currently attempting to dimension to a spline in an orthographic drawing and running into some issues. I can't seem to find a way to properly dimension rather than making microscopic holes in the piece and that way giving the .idw something to grab on to for dimensioning.
View 2 Replies View RelatedI need to be able to extract all "X" and "Y" axis points from a "spline" created in a 2D "sketch" and display them in the "Debug" window (for test only).
View 3 Replies View RelatedTrying to find a way to increase the size of the 3D spline nodes so that they can be seen easier. Is there a setting to control this?
View 2 Replies View RelatedI am totally new to Inventor. I have a lot of experience in Illustrator and Photoshop; what I want to do is possible in those programs, but I have not figured out how to do it in Inventor.
Essentialy, I want to make a closed path from a spline and a straight line— this will become a custom shape that I want to turn into a solid. Is it possible or should I just use the split feature?
In the end, I am trying to make a solid that is similar to a section of this necklace, minus the curved portion that connected them to the necklace, itself.
I am drawing an airfoil profile in Inventor for use in a CFD package. I have a system of points which I am plotting and connecting via the spline function and extruding them to form my blade profile. However, when I open the drawing in the CFD programme, it is recognising the spline as a series of straight lines instead of one continuous enclosed shape. The CFD programme I am using require a negative (i.e a solid drawing of where fluid is flowing). I have attached the inventor file I have created.
View 3 Replies View RelatedHow to pattern a feature along a spline curve so that the resultants are separated by an equal linear distance (chord length), rather than as a function of the spline curve's length?
View 2 Replies View RelatedTrim/ extend sketch geometry dynamically doesn't work with construction lines?
View 1 Replies View RelatedI recieved several .stp files from a vendor and most of them imported without incident. One part is giving me a major headache though. The envelope of the solid body is much larger than the actual part. This is causing the origin to be skewed by several orders of magnitude. Any way to trim down the envelope to the part size?
Using IV2011 Pro.
I have a client who is replacing a large fleet of machines located in premises throughout the country. In theory the replacement program should be straightforward..... however machine dimensions have increased slightly, new service access doors have been added and user control switches and indicators have moved. I have Inventor Assemblies of the machines to show the door and body changes, but not the complex user interface panel (buttons and switches). If I could only import a sketch of the interface panel, it would look great in an Inventor drawing and I could dimension the all important position of components on the interface panel.
I have PDF drawings of the fascia panels which I can import to Adobe Illustrator and save as a DWG. When I look at the DWG in AutoCAD Mechanical, all looks well. When I import the drawing to Inventor part sketch however lots of spline control vertices appear. I cant delete the control vertices in AutoCAD or the drawing falls to pieces when imported to Inventor.
How then do I hide the vertices from my sketch in Inventor. Am I doing things the hard way? Are there shortcuts to importing PDFs in Inventor?
Inventor 2013 sketch mode is excellent as I only have to change one dimension to scale my sketch. I can also stretch/manipulate the sketch to make up for any errors in the original PDF.
I am trying to create a 3d surface by importing points from an excel file. I have been using "import points" in the 3d sketch mode, and checked off the box that says "create 3d spline." But this just causes Inventor to freeze and crash. My excel file had about 2000 points, all of which lie on the surface I want to create in Inventor.
Should this method work in theory, and do I just have too many points?
I want continuously to display the loop measuring of a Spline/Arc/Line/Slope (or even have it as a dimension / parameter on a sketch/part) because it change in relation to the block-position that constrains to the slope.
View 3 Replies View RelatedAt my company we have a custom CC library with custom profiles for use in frage generator. We are having a problem with one of the frames. Everything goes well when the profiles is inserted.
But when I try to "trim to frame" the intersections of two profiles, it does not trim them correctly. It trims them in a 45 degree angle. As you can see on the attached jpg file.I tried everything. Checked the sketch, deleted the profile, republished the part.
Many times I see that these types of irregular shapes which comprise of spline curve are created with very less or no dimensions, so I want to know how this spline curve was created and can be controlled, if I want to create it in an exact manner what dimension I should use ?
View 2 Replies View RelatedHow to curve a piece of sheet metal over the outside curved edge of the attached part. I can do it the old fashioned way but was wondering if it could be done in sheet metal which would give me the flat pack automatically (that way there is less chance for errors). There are several of these baffles joined together by a spine and the sheetmetal will eventually go over all of these, and have a few modifications to shape the end profile.
The outer curve is a spline which has changing radius and hence to use a contoured roll would be rather difficult and time consuming (there are also some flat sections at each end of the curves as well).
Autodesk Inventor Professional Student 2013 is the version I'm using.
I am now trying to model a fuselage for an RC plane and am trying to copy a spline from one work plane to a new one and link them together so that if I edit one, it is reflected in the other. Copying and then pasting into the new plane doesn't link the two splines together.
View 9 Replies View RelatedHow to set off the trim inventor does when one dimensions cross another one?
View 4 Replies View RelatedI am drawing a fan wheel. The fan blade is curved intersects the shroud, consisting of two cones. I do not know how to trim the blade to the cones. I tried to "split" the blade at the cones and then "delete face" but then the "Go to flat pattern" section on the ribbon is missing. If I suppress the "delete face" feature the "Go to flat pattern" re-appears.
View 1 Replies View RelatedWhile tracing a tree image using splines for a school project i have run into some problems...I am creating a pattern for a plasma cutter.
When i move the points of my spline sometimes it causes the whole spline to randomly move around and twist and turn where there are no points. Also sometimes when i open the drawing some of the spline lines are out of place while the spline points have not moved.I have tried to constrain all the points but it turned into a mess.How can i stop this from happening?
API enhancement/fix in SP1: Cannot create a radius dimension on circular drawing curves projected from spline edges.Does it in some way trying to refer to the issue with nonplanar arcs turning into splines in drawings saved-as AutoCAD .DWG?
View 3 Replies View Related