I recieved several .stp files from a vendor and most of them imported without incident. One part is giving me a major headache though. The envelope of the solid body is much larger than the actual part. This is causing the origin to be skewed by several orders of magnitude. Any way to trim down the envelope to the part size?
Using IV2011 Pro.
Envelope distort to center of the object only possible?
How to achieve the effect shown in the image? If not with Illustrator what software can do this effect?
It's like an envelope distort but like the object (small circles) is not entirely wrapped into the envelope.
I tried moving the corners of the applied envelope towards the center of the object but it resizes the entire shape along with it...
4621.CorelDRAW Clone Bug.mp4
Trim the master object and the cloned object gets deleted.The master object cannot be directly trimmed, so I grouped it with another object, which seems to enable the shaping tools. check if this behavior exists in X5 also.
I have inserted a clip about the problem. Maybe other users and the Corel staff will check it out.
I have a rounded rectangle and an object on top of it -- how do I make it so that the parts of the object outside of the rounded rectangle are hidden?
View 5 Replies View RelatedHow to trim the object using VB coding
View 3 Replies View RelatedI'm looking for an easy way to extract the information of max box dimensions (X, Y, Z).
When we want to send one part, or assembly all over the world, we need those dimension. I think, it is something that inventor already have it but not in an easy way like a phisical propertie that you can include in your BOM. Is this something for autodesk to implement?
how you can trim an object to the shape of the object on top?
View 9 Replies View Relateduntitled.jpg
Is there a way to convert those lines into plines, so i could extrude and cut.
[URL]
how to delete the certain parts of complex at once by using the single object above all of them.
I have two intersecting objects, which I merged.
Problem is, that the merged object has a pertruding edge, which I want to trim off, but I can't. I tried drawing a rectangle over the unwanted part, but for some reason, the rectangle, or any path I try to make around that edge, it shifts to the left, as if it is snapping. I don't know if it is because I'm too zommed in, but there must be a way to intersect the two seamlessly...
See the image below
I've tried to import a dwg file that was created by someone else but I'm having a hard time editing it. I can scale it and move it and things like that, but if i wish to change the height. I tried scaling it, but it messes up the object. The object I am trying to shorten is a measuring rack on this site [URL].......
I can't change the objects height. Perhaps it's because it's a block reference or something. I've tried editing the block itself, but i have no luck in trying to edit the height. I cant splice it either.
I've attached the file im trying to change the height of.
I am trying to accomplish something but i am not sure of the correct terms to use to describe it. I would like to "trim" or "cut" around an object in an image and have a "cloud" or "blur" around the edge. I have included a link below with an example of what i am trying to accomplish from an ebay listing. If this is possible with gimp, if not with what other program?
[URL] .......
I like to attach a .aim or import a inventor DWG into a section and a plan in autocad.
But how do I select the right orientation on import? The default Inventor view is a sideview and won't work on a plan.
Right now it seems like I either have to go into 3D model view and rotate the object or have to change the orientation Inventor for plan and then reorientate it for section...
Here I enclose file Cam_Profile.ipt, this is a spline curve made from an Excel matrix with 670 points in 3 decimals accuracy (VBA editor)
Extruding is not possible because of self intersecting path.
I want to trim both two free ends from the intersection and also close the intersection for extruding this profile. However ....., without displacement of any current point in the perimeter of the closed spline!
how do i trim away the section on RevolutionSrf1 underneath features RevolutionSrf2 and LoftSrf1 ?
Inventor 2012
I am having trouble with a part that I am working on. Trying to trim to the tangent edge. I cant post the part that I am actually using, but here is an example of a similar problem. In the attached file, open the "Negative Part.ipt". The sketch 2 contains a line (unconstrained). I need this line to be tangent with the curve below it.
I can project the edge of the curve to my sketch plane, but not the tangent of the radius.
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 3.60ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1.1 (update1)
Vault Basic 2013, SP1
I need to Trim or Extend Sketches. Is there any API to access the Trim/Extend Tool?
View 1 Replies View RelatedTrim/ extend sketch geometry dynamically doesn't work with construction lines?
View 1 Replies View RelatedI've got a car that's been imported from Alias. Its been tessellated via showcase. I'm trying to UV map it as I need to apply some camouflage and it's not going so well. I get an extremely complex UV layout in the UV editor based on the original NURBS patch layout from Alias, needless to say its not very useable.
View 2 Replies View RelatedAt my company we have a custom CC library with custom profiles for use in frage generator. We are having a problem with one of the frames. Everything goes well when the profiles is inserted.
But when I try to "trim to frame" the intersections of two profiles, it does not trim them correctly. It trims them in a 45 degree angle. As you can see on the attached jpg file.I tried everything. Checked the sketch, deleted the profile, republished the part.
I am trying to use it to do something for school. I imported a 3d object from a dwg file and there is a channel that curves along it cut into that. I want to move a cylinder in this channel. I cannot seem to find anything that will allow me to make a spline that mirrors the edge of the object or to constrain the cylinder to the object.
View 1 Replies View RelatedI imported a character model that I downloaded off of the internet into maya, and I have run into a snag as I'm rigging, skin binding, etc. The model has a main body, but its armor is actually separate geometry. My problem is that the shoulder pads and leg armor are mirrored, so that when one moves, the other one does as well, which is a big problem when I want to animate the model. Is there a simple way to split the pieces up so that they are not mirroring each other? My guess is that they were originally created that way so that each side didn't have to be individually worked on.
View 1 Replies View RelatedI try to shoot all my pics same light, etc. I want to paste all my designs on this uniform towel (no background).As you can see the square pasted on with basketball is on the same cloth but looks unmatched.
how I could blend/edit it in with the towel, keeping basketball & Kyle the same? Or should I try doing something else?
How do you add a keyline stroke around an imported tiff, jpeg etc? In InDesign it's as simple as adding stroke to the frame (the frame is automatically created upon import).
OK, I think I figured this out and it is soooo Illustrator:
Add stroke to object (nothing visible happens); apply a 'convert to rectangle' effect to the invisible stroke and... voila, a simple keyline!
How to set off the trim inventor does when one dimensions cross another one?
View 4 Replies View RelatedI am drawing a fan wheel. The fan blade is curved intersects the shroud, consisting of two cones. I do not know how to trim the blade to the cones. I tried to "split" the blade at the cones and then "delete face" but then the "Go to flat pattern" section on the ribbon is missing. If I suppress the "delete face" feature the "Go to flat pattern" re-appears.
View 1 Replies View RelatedI have a 3ds model of a golf ball I purchased. It imports properly into my Photoshop CC. I haven't been able to figure out how to apply an image (my logo) to the surface of the golf ball. Also, the golf ball has a dimpled surface so I will want the image to follow the contours of the ball, as if it would look if the logo were painted onto a real golf ball.
EDIT: Also, I want to keep the golf ball as a 3d object so I can animate it in a scene.
I have a revit file with an imported dwg object. I accidentally deleted all of its layers. How can I purge the object out of the revit file?
View 5 Replies View RelatedI imported a music graphic to AI, selected it, then chose warp and changed some settings in Lower Arc, but nothing happened. How to do it?
View 20 Replies View RelatedPreviously i`m using version 2009 and importing Google earth image and surface works fine. However, recently i tried with version 2010 and i`m having some problem here (imported surface / contour seems ok but the image is too large like 3x or 4x). How to solve that?
View 3 Replies View RelatedI have recently been fighting an override of some sort that doesn't want to go away. As an example, for basic copy command, I would normally select my object to copy, type C, hit the space bar, and select my object again to copy to new location. With this override, I select my object, type C, hit the space bar, and in the command line, this appears:
Command: c COPY 1 found
Current Settings: Copy mode = Multiple
Specify base point or [Displacement/mOde] : c