4621.CorelDRAW Clone Bug.mp4
Trim the master object and the cloned object gets deleted.The master object cannot be directly trimmed, so I grouped it with another object, which seems to enable the shaping tools. check if this behavior exists in X5 also.
I have inserted a clip about the problem. Maybe other users and the Corel staff will check it out.
how you can trim an object to the shape of the object on top?
View 9 Replies View RelatedI want create an object. A 0.5 inch hole for instance. I want to place this object into a drawing or mutiples of this object in my drawing. Two things i would like to do. If i decide i want to change the hole to 0.25 inches i want to change one instance of the object and all instances to change automatically. Second is that if i scale the drawing up in size I would like all the 0.5 inch hole to remain at 0.5 inches.
View 8 Replies View Related[URL]
how to delete the certain parts of complex at once by using the single object above all of them.
I'd like to delete a layer but the layer cannot be deleted from the object manager as the delete menu item is disabled for that layer.
View 1 Replies View RelatedI have a rounded rectangle and an object on top of it -- how do I make it so that the parts of the object outside of the rounded rectangle are hidden?
View 5 Replies View RelatedI am trying to edit the Master Page in Corel Draw X4. However I can't find how to list it in the obect manager. The first image shows the Object Manager as I see it.
The second image shows an example of the Object Manager as people have posted in other discussion topics.
How do I list all pages within the Object Manager as shown in this second example, and have the + and - buttons to expand the selection ?
Any way to turn an object that has been used as a master (parent object) or its resulting clone back into a normal object?
View 10 Replies View RelatedThe setup, im attempting to create mtext aligned to the selected object at the point nearest to where i select, this works fine for active objects, but is failing when it trys to calc the angle on nested objects
(Line 106,
Dim
fder AsVector3d = bah.GetFirstDerivative(inspt)
)
i think this is because the point is not associated with the cloned (from xref) object? any thoughts on how to get it to work with the single object selection/insertion point prompt? in the meantime ive re-written to have a second prompt for the insertion point, which works on the cloned object.
Heres the Imports
SystemImports Autodesk.AutoCAD.RuntimeImports Autodesk.AutoCAD.ApplicationServicesImports Autodesk.AutoCAD.DatabaseServicesImports Autodesk.AutoCAD.GeometryImports Autodesk.AutoCAD.EditorInput<Assembly: CommandClass(GetType(Line_Labler.snibbity))> Namespace Line_Labler Public Class snibbity <CommandMethod("linelabel")> Public Sub snabble()
[code]...
why is it when i cut and delete a line from an object, after the line is deleted, there is another line appear automatically , and i can not select the line itself. how do i keep the object from closing??
View 2 Replies View RelatedIs it possible to clone a 'master' object so that when it is altered all the clones are similarly updated? (or, rather than a master object, they all update whenever any of the others are changed?)
View 3 Replies View RelatedHow to trim the object using VB coding
View 3 Replies View RelatedResizing objects is a mess in CorelDRAW X6 when objects are outlined with Scale With Object enabled to retain proportions after resizing.
None of the tools dealing with outlines (e.g. Contour or even Outline itself) continue to work properly after resizing the object.
I strongly suggest to recalculate outline property values after resizing if Scale With Object is checked. Don't just do it hidden somewhere internally in the object model by applying a temporary scaling factor. Instead actually recalculate the actual property values if Scale With Object is checked.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies View RelatedIs there a way to exclude single attributes from being defined in a object style? As example: i want to define an outline that does not change width of the objects, but everything else.
There is a small tick box right of every attribute with help text "None this object attribute is not defined by a custom style" but i can not mark it. My feeling is, that i need to switch on this tick box to get the result i need, but i can not. When i click on it, it just gives me a greyed out "Revert". When i try to make child styles, there is a way to break the connection to parent style with these tick boxes, but no luck.
Is it a bug? I tried it with X6, X6.1 and X6.2
I have two intersecting objects, which I merged.
Problem is, that the merged object has a pertruding edge, which I want to trim off, but I can't. I tried drawing a rectangle over the unwanted part, but for some reason, the rectangle, or any path I try to make around that edge, it shifts to the left, as if it is snapping. I don't know if it is because I'm too zommed in, but there must be a way to intersect the two seamlessly...
See the image below
Occassionally the object properties in my object manager will dissappear and I am unable to bring them back. I have tried toggling all the buttons on the manager, restarting corel, resetting corel to it's default settings and restarting my computer but nothing will bring back the properties. It does not happen on every single file but it happens often enough to be a pain. I have attached a picture of what the object manager looks like.
View 6 Replies View RelatedThere is problem with my CorelDRAW X6.
After I import different files in my working file, it's getting hard to work- RAM(16GB) is getting completely full and its almost unworkable!
I checked out Object Manager and found stack with "SVG data" and "Locked SVG data" object there under some basic shapes.
Stack is about from 10000 to 100000... Some times even more, but its not possible to select all them because Corel just stops. What is that- "SVG data" and "Locked SVG data" object and why they are so many there?
It involves right clicking on an object in Corel Draw X6. I had this same issue in X5 too.
My issue is that if I select an object and then right click on that object (I right click on the "X" in the middle of the selected object) it will select the object below the "X." In other words, I can only ever get the right click menu to appear on the object I select if there are no objects below it.
untitled.jpg
Is there a way to convert those lines into plines, so i could extrude and cut.
I have a revit file with an imported dwg object. I accidentally deleted all of its layers. How can I purge the object out of the revit file?
View 5 Replies View RelatedI recieved several .stp files from a vendor and most of them imported without incident. One part is giving me a major headache though. The envelope of the solid body is much larger than the actual part. This is causing the origin to be skewed by several orders of magnitude. Any way to trim down the envelope to the part size?
Using IV2011 Pro.
I need to find a way to cut the shape of one object out of another object. In the above photo I need to be able to print the black crosses without the printer printing the white ink under them (you can see where the black ink is not adhering to the white ink very well).
View 11 Replies View Related I am trying to accomplish something but i am not sure of the correct terms to use to describe it. I would like to "trim" or "cut" around an object in an image and have a "cloud" or "blur" around the edge. I have included a link below with an example of what i am trying to accomplish from an ebay listing. If this is possible with gimp, if not with what other program?
[URL] .......
1. find the attached “Rays on Oval.png” file. (Tried attaching .cdr file but the File Size is 400KB.)
2. I would like to Repeat / Duplicate that Black Color on Outer Path of Oval Shape. (Like shown in the Yellow versus Black. The Yellow is a Circle and the Black is from Star Tool)
3. I think the Best Bet would be to Link the Rays to the Outer Path of Oval Shape.
4. I need the Rays and Oval as 2 Different Objects so that I could Change the Color Scheme.
We're running InDesign CS6 (version 8.0.1) in my office. When we override and delete a master page item from a page then save out the PDF, the deleted item still shows up in the PDF.
Example: We typeset a string of 250 trading cards. Each card is a separate page, in a single InDesign document, and are all based on one of several possible master pages. On the master page for a given card there are some graphic elements like symbols and directional arrows. During typesetting on a card that uses that specific master page we find one of the pointing arrows needs to be oriented in a different direction. We override the existing arrow and delete it, then replace it with the correct arrow (the arrows are placed graphics). The old arrow is no longer visible in the InDesign file. When it comes time to export the file for the printer we run a script that exports each page as a separate PDF. When we proof the PDFs, the card with the arrow adjustment still shows the deleted arrow, it is visible beneath the new arrow. If we save out that page by itself (with the script or manually), this problem doesn't occur. It only happens when we save out the entire set of cards at once or as a single, multi-page PDF. Though we typically use a script for the export, we still get the same result if we don't use the script.
I'm want to drag an objects anchor and have the position co-ordinates offset by opposite amounts so it doesn't appear to move postioin on screen. IS there a tool for that?
View 3 Replies View Related1. After creating a clip mask can I view it without the actual object also being visible?
2. Can I paste one object into the clip mask of a different object?
can I snap an object/vertex/edge to another object straight in one axis?
I'm coming from Rhino 3d, where this is possible by holding the shift key.
3ds Max 2012 SP2
i7 2600
16GB RAM
Geforce 560ti OC
I have simple a 3D bottle shape created from about 16 points and I am trying to map a gif image on to it usning CS5. No matter what I have done (work from a new document, etc.) I always get the error message. I also receive this error when I attempt to map a jpg image on to the same shape. I have attempted this on three different Windows 7 machines running CS5 with the same result. When I try it with CS6 the program closes with a catastrophic error and no message. I do not receive this error using the default symbols. The gif and jpg images are imported and imbedded into the document and then moved to the symbols library.
View 6 Replies View RelatedI have a rather simple 3rd party custom object... I tried to get its bounding box but the coordinates that come back don't seem to relate at all to the object.
What I'd like are the coordinates of two nodes the object contains...
Is it possible to apply the autocad cursor in some why with the node object snap to get their coordinates?
