AutoCad 3D :: Trim Object At 45 Degree Angle?
Nov 14, 2011untitled.jpg
Is there a way to convert those lines into plines, so i could extrude and cut.
ADVERTISEMENT
AutoCAD 2010 :: Taper Circular Object 1-1/2" High On 45 Degree Angle?
Jan 20, 2012I'm trying to figure our how to taper a circular object 1-1/2" high on a 45 degree angle from the top down (that is the lower part goes in like a pie pan). Taper doesn't seem to work.
View 2 Replies View RelatedIllustrator :: Shortcut To Draw A 45 Or 90 Degree Angle From Drawn Line On Angle?
Nov 13, 2013Is there a shortcut to draw a 45 or 90 degree angle from a drawn line on an angle using the pen tool? ie. Rather than just from the x and y axis.
I trace a lot of maps and site plans.
AutoCad 3D :: How To Sweep Under 90 Degree Angle
Nov 22, 2013I'm trying to sweep it around shape like this But it won't, it says "The selected path curve is not valid." - so what do I do? (it is polyline) Is there maybe some other way to get this 3D shape fast?
View 8 Replies View RelatedAutoCAD Inventor :: 45 Degree Angle On Flanges
Dec 19, 2013easier way to program 45 degree corners on the top flange of two mating parts. We can't bend the ends on so they have to be welded. I am using inventor 2014 professional. Almost all my programming is done in sheet metal.
View 2 Replies View RelatedAutoCad :: Creating A Tube With 45 Degree Angle
Jan 3, 2012I'm trying to draw the following bench in Autocad but I'm getting bogged down trying to figure out how to create the following tube with an angle on it and how to achieve different shapes at the top of tube.
View 9 Replies View RelatedAutoCAD Inventor :: Cutting Cylinder At 45 Degree Angle?
Dec 3, 2013 I am trying to make a toilet paper roller; standard white ones with the spring inside [URL] .
I need to cut the bottom of the cylinder at a 45 degree angle from the center to wall so if the roller was standing, it would be at an angle of 45 degrees to.
I have attatched what I have so far.
I am having trouble with the slicing. I am not sure how to chop the whole cylnder at an angle.
Also how do I remove the yellow lines and the white line with the measurement .1280 (you'll understand when you open the file)
AutoCAD Inventor :: How To Make A Cut In A Cylinder In A 45 Degree Angle
Oct 18, 2012I am trying to make a cut on a 12" D cylinder at a 45 degree angle and i am having a little trouble. I have projected the shape onto the curve and sketched it. Now to finish the cut do i need to scuplt that path or how do I go about doing this.
I provided a screen print to try and and explain it a little batter. The half moon looking sketch is what i am tring to cut out of the cylinder. i have already projected the surface lines on the cylinder, but get stuck at this point
AutoCAD 2013 :: Create 3D Cylinder With 45 Degree Angle Cut On Other End
Jun 18, 2012I am have a problem. How do you create a cylinder with a flat end on one side and on the other side have it at a 45 degree angle.
View 4 Replies View RelatedAutoCAD Civil 3D :: Model An Alley With A 90 Degree Angle (turn)?
Dec 26, 2012What's the best way to model an alley with a 90 degree angle (turn). Do I treat it as an intersection with a zero radius? My typ section is 15 feet width with a 4% slope down to the center of pavement. "V" bottom. Not sure how to get it to model the outside corner and also eliminate the inside overlay.
View 8 Replies View RelatedAutoCad :: Rotating / Stretching Dynamic Block Along 45 Degree Angle
May 7, 2010I'm trying to create a dynamic block for plywood. I have the stretch parameter working so that I can stretch the plywood to the needed length. I also have set a rotation parameter based on the various roof pitches that we use. The problem is I would like to be able to rotate the sheathing to a 45 degree angle and then stretch along the 45 degree angle. Once I rotate the sheathing the stretch does not follow the rotation angle. I have attached the file.
View 9 Replies View RelatedAutoCAD 2010 :: Get Correct Notation For Angle In Degree / Minute / Second?
Apr 15, 2012How to get the correct notation for the angle in degree/minute/second?
I wanted to show the angle as 29˚12’13’’ but not as 29d12’13’’
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCad :: Polar Increment Angle To Make A Degree In Drawing
Mar 1, 2011how do one wants to do a polar increment angle to make a degree in a autocad drawing. I want to design a truss but at the angle of the truss , how to make an angle between the top chord and lower chord. which icon i should click on ?
View 3 Replies View Related3ds Max Modeling :: How To Bend Model In A 90 Degree Angle
Nov 8, 2013I'm experimenting with 3d printing and wish to create a tube system based on this vase. Im completely new with 3ds max. What's the easiest way to simply bend the entire model 90 degrees? URL...
View 2 Replies View RelatedGIMP :: Wrapping Text At 90 Degree Angle?
Feb 7, 2012wrapping a continuous line of text around a 90 degree bend. The third attached image is exactly what I need it to do. That is something I just put together as an example though.
I have some repeating information that I want to wrap around the border of an image. Being that it is repeating information, the text can also look like the first and second image uploaded, where part of the word is cut off. I would prefer this to be minimal though.
So far all I have found in my time searching on this leaves the words distorted.
No matter the complications, this also needs to be scripted. It is not feasible to do this manually as the repeating information is dynamic.
EDIT: The upload for the thumbnails is off.
Added Details.Attached File(s) textwrap2.jpg (8.9K)
Number of downloads: 19 textwrap2.jpg (8.9K)
Number of downloads: 17 textwrap.jpg (8.38K)
Number of downloads: 7
GIMP :: Rotate Picture - 45 Degree Angle? (2011)
Feb 4, 2011I'd like to orient a picture of a book so that it's on a 45 degree angle and then "cut out" the area around the "book" to that when you view the picture is looks like a book on a 45 degree angle with no area around it. I'm sure GIMP can do that but the question is whether I can put that same photo on a website and have it look like it's a book on a45 degree angle.
View 4 Replies View RelatedAutoCad 2D :: Rotate An Object To Match An Angle Without Knowing The Angle?
Oct 5, 2011Is there a quick way to rotate an object to match an angle without knowing what the angle is? I am using AutoCAD 2011 now. I was using 2007 and I had an add on command the would rotate an object using a base point and picking the two lines that make up the angle, and it would match the angle you wanted. I can not get that command to load in 2011.
View 4 Replies View RelatedCorelDRAW X6 :: Trim Master Object And Cloned Object Gets Deleted?
Apr 3, 20124621.CorelDRAW Clone Bug.mp4
Trim the master object and the cloned object gets deleted.The master object cannot be directly trimmed, so I grouped it with another object, which seems to enable the shaping tools. check if this behavior exists in X5 also.
I have inserted a clip about the problem. Maybe other users and the Corel staff will check it out.
Illustrator :: How To Trim Object To Only Show Up Until Outline Of Object Behind It
Jul 4, 2013I have a rounded rectangle and an object on top of it -- how do I make it so that the parts of the object outside of the rounded rectangle are hidden?
View 5 Replies View RelatedAutoCAD VB :: How To Trim The Object
Sep 26, 2012How to trim the object using VB coding
View 3 Replies View RelatedCorelDRAW X5 :: Trim Object To Shape Of Object On Top?
Jul 26, 2011how you can trim an object to the shape of the object on top?
View 9 Replies View RelatedAutoCAD Inventor :: Trim Envelope Of Imported Object?
May 18, 2012I recieved several .stp files from a vendor and most of them imported without incident. One part is giving me a major headache though. The envelope of the solid body is much larger than the actual part. This is causing the origin to be skewed by several orders of magnitude. Any way to trim down the envelope to the part size?
Using IV2011 Pro.
AutoCad 2D :: 0 Degree Is Vertical As 90 Degree
Jul 19, 2011I received a drawing from a client, which has all the features on a coordinate system, But the drawing is rotated for some reason. Even after rotating the drawing the coordinates are the same as it was prior to rotation. I believe there may be some variables that has been changed for this. If a line is drawn A@100<0 it is drawn vertical instead of horizontal and like wise @100<90 is drawn horizontal instead of vertical.
Attached is the drawing.
CorelDRAW X6 :: Trim Object At Once?
May 21, 2012[URL]
how to delete the certain parts of complex at once by using the single object above all of them.
Illustrator :: Trim Off Edge From Object?
Jan 16, 2013I have two intersecting objects, which I merged.
Problem is, that the merged object has a pertruding edge, which I want to trim off, but I can't. I tried drawing a rectangle over the unwanted part, but for some reason, the rectangle, or any path I try to make around that edge, it shifts to the left, as if it is snapping. I don't know if it is because I'm too zommed in, but there must be a way to intersect the two seamlessly...
See the image below
AutoCAD Architecture :: Rotating Object To Match Angle Of Another
Jul 26, 2012i would like to rotate an object to match the angle of another. I can measure the angle but there are many decimal points and I want it to be exact.
One method i have employed is to change the ucs - z setting to align with the object to be rotated then click it and select a point that intersects the other object (this case a line) and then the 2nd snap is somewhere along the line.
this works although sometimes i have to rotate a second time 90 deg. or 180 to get proper orientation.
Is there method, or hidden snap?
ACA2011 Win 7
AutoCad 3D :: How To Do Draft Angle - Five Stared Shaped Object
May 14, 2013How you do the draft angle of, for example, five-star-shaped object in AutoCAD?
[URL]
GIMP :: Trim / Cut Around Object In Image And Have Cloud Or Blur Around Edge
Nov 11, 2013 I am trying to accomplish something but i am not sure of the correct terms to use to describe it. I would like to "trim" or "cut" around an object in an image and have a "cloud" or "blur" around the edge. I have included a link below with an example of what i am trying to accomplish from an ebay listing. If this is possible with gimp, if not with what other program?
[URL] .......
AutoCAD Civil 3D :: Custom Rounding And Format Of Object Annotation For Angle
Sep 7, 2013How do you set an object's annotation, say a line, to display a line's angle or bearing precision to the nearest 20th second.
Kinda like this for decimals:
0.000
0.00
0.0
But for degrees minutes seconds.
Also, I will require the seconds to hide if the nearest 20th second was a 00. I also need a leading zero for minutes if the minutes was under 10 minutes.
AutoCad 2D :: Make Vertical Hatching Angle Move With Curve Of Object Being Hatched
Jun 21, 2011I want to know if there is a way to make the vertical hatching angle move with the curve of the object being hatched.
In other words how do I/can I stop this ...
Illustrator :: Move Object With Distance And Angle?
Jun 21, 2012Illustrator CS6, menu object, transform, move: when I move an object using orizzontal value and vertical value (example 10 mm from X and 10 mm from Y) the value in distance and angle is correct (14,1421 of distance and -45° angle) but, when I want to use distance and the angle for drawing in isometric way (example: 10 mm distance and 30° angle) the orizzontal and vertical value is not correct as you can see in the attached file below
View 14 Replies View Related
