I am trying to accomplish something but i am not sure of the correct terms to use to describe it. I would like to "trim" or "cut" around an object in an image and have a "cloud" or "blur" around the edge. I have included a link below with an example of what i am trying to accomplish from an ebay listing. If this is possible with gimp, if not with what other program?
[URL] .......
I have two intersecting objects, which I merged.
Problem is, that the merged object has a pertruding edge, which I want to trim off, but I can't. I tried drawing a rectangle over the unwanted part, but for some reason, the rectangle, or any path I try to make around that edge, it shifts to the left, as if it is snapping. I don't know if it is because I'm too zommed in, but there must be a way to intersect the two seamlessly...
See the image below
when I try to cut out a freeform selection, it blurs the edges around the remaining image. Since I want to be able to piece together the images later, I want to avoid this. How?
View 1 Replies View RelatedI want to blur just one edge of an image in my site header, so it fades into the white background rather than retaining a sharp edge. I could finally get the effect (using an alpha channel and Refine Edge) but couldn't get it to stick when saving.
I read that JPGs can't accommodate alpha channels but even a tif didn't work.
I tried different functions like Refine Edge, feather, etc - all to no avail. I was working in PSD.
I have a Photoshop image, which has been edited down to a shape of a person, with a transparent background. I would like to use this image in Illustrator, and do not need it to be vector, but would like the object to be shaped like the image, rather than a rectangle. How do I get the Illustrator to read the edge of the image as the edge of the object?
View 3 Replies View RelatedI've created my business card using gimp a few times. I usually us Vista Print to print it. The picture resolution is at 300 but when I get the printed image it has a little blur around the wording (that's the best way I can describe it). It's not a clear print. What do I need to do to have a more clear image to print? When I see the image on my computer it's crystal clear... I just wish it would print that way.
View 2 Replies View RelatedI resized my image from small to large. It is now 600wx300l px (for blog banner). How do I remove the blur and clear it up? Is this possible?
View 2 Replies View RelatedWhen I rotate this one and I got blur version in nd version below. How do I avoid blur ?
Check this out below:
I want this:
to this:
How do I make an image match the colors of a cloud, like in this attachment?
Right before putting the image in a normal cloud picture, what's the easiest way to select the part of the image I want in the cloud and have it fade out all around the image like it does in this example? Is there a much better way than the Fuzzy Select Tool option?
I have a photo and I would like to blur the bottom of the image while leaving the top of the image sharp, similar to limiting the depth of field by using a large f-stop. I created a gradient mask and then used Filters > Blur but it is not working. If I choose the layer that I created the mask on and choose blur, nothing happens. If I choose the layer (background) under the mask then the whole image blurs.
View 3 Replies View Related4621.CorelDRAW Clone Bug.mp4
Trim the master object and the cloned object gets deleted.The master object cannot be directly trimmed, so I grouped it with another object, which seems to enable the shaping tools. check if this behavior exists in X5 also.
I have inserted a clip about the problem. Maybe other users and the Corel staff will check it out.
I have a rounded rectangle and an object on top of it -- how do I make it so that the parts of the object outside of the rounded rectangle are hidden?
View 5 Replies View Relatedhow you can trim an object to the shape of the object on top?
View 9 Replies View RelatedI am having trouble with a part that I am working on. Trying to trim to the tangent edge. I cant post the part that I am actually using, but here is an example of a similar problem. In the attached file, open the "Negative Part.ipt". The sketch 2 contains a line (unconstrained). I need this line to be tangent with the curve below it.
I can project the edge of the curve to my sketch plane, but not the tangent of the radius.
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 3.60ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1.1 (update1)
Vault Basic 2013, SP1
I am having some trouble trimming a line using a circle as my cutting edge,the line falls short of the circle,I have tried changing EDGEMODE and still the problem persists!
View 9 Replies View RelatedI don't know how to do an edge blur. basically I have a smokey cloud in the background and a picture in front of it. i want the edges of the picture in front to be blurred so it appears to be all one picture.
[attachment=0]tss.jpg[/attachment]
Attached Images
Essentially I'm doing the same effect as you would use to blur a face; adjustment layer-mask-guassian blur. However, I can't figure out how I would go about feathering the edges of the blur. Instead of having a box with very clear cut edges where the blur/mask ends, I'd like to feather the edges and have the blur fade into the rest of the comp.
View 4 Replies View RelatedI can crop and feather a selection of an image, but what i wanted to do was apply a feathered edge to an entire image so that i could drop it into a word doc and it would look a bit smarter.
I've been trying to do it by -
'Select > All ' then ' Select > feather ' applying the amount of feather (i did an inch just to make sure).
But it made no difference - i tried exporting this as a JPEG to see if it came up then but it still didn't make a difference...
know when these will work with Foxfire EI, etc.?
View 4 Replies View Related[URL]
how to delete the certain parts of complex at once by using the single object above all of them.
How to trim the object using VB coding
View 3 Replies View Relateduntitled.jpg
Is there a way to convert those lines into plines, so i could extrude and cut.
I recieved several .stp files from a vendor and most of them imported without incident. One part is giving me a major headache though. The envelope of the solid body is much larger than the actual part. This is causing the origin to be skewed by several orders of magnitude. Any way to trim down the envelope to the part size?
Using IV2011 Pro.
If I want to cut out the background of an image and leave just the object how best can that be done?
I read in one of the threads to erase it out. Is there a better way?
i'm very new to gimp.
I need to blur a moving object:
- The effect is only needed at some point of the video, it must appear, and then disappear, not being on screen the whole time.
- The object is moving, and changing shape, the blur must adapt to it.
- I've been trying to use the "Track Motion" option with Position & Rotation, then the "Analyze Forward" button, but the thing makes a mess all over, it's not following the object at all, then if You try to adjust it manually, it's only done in 1 frame, in the other frames the thing is off the object, then the "Tracking" stays on screen.
I have been using GIMp to do some basic things but have recent got a but stuck on how to best replicate part of a subject/object in an image. for example
I have an image of a corner of a building with the wall on the left and right, and sky at the top of the image. I would like to extend one of the walls out to extend the width of the image and also replicate the sky.
The walls are on a slight angle so I can not simply do a retangle block and copy/paste, also when I do this on the sky, the gradients of the paste dont match up nicely.
This is an issue I have encountered in CS6 & CC since I've been using a slightly different workflow on a few projects.
I create a smart object, say a coposite of a landscape with a road in it. I add a Radial Blur (zoom) to and move the origina point, file looks great and is adjustable as a smart filter.
Problem occures, if I use Radial Blur (zoom) on another image and change the settings and vanishing point. - When I return back to the image with the blur as a smart filter, the zoom origin point has reverted back to be centred.
On the subject of Radial Blur (zoom) a feature I would like is to be able to set the origin point of the zoom to be outside the canvas area.
when i try to radial blur this circle inside the object this is what i get. what am i missing? the blur center is set correctly. im using photoshop cs6
View 5 Replies View RelatedCreate a shape with the Rounded Rectangle > I apply a Gradient & Bevel
New Layer > Fill with White > Ctrl + Alt + G (clipping mask) > change Layer Blend to Multiply > Opactity to 35% > Filter > Noise > Add Noise
New Layer > Ctrl + Alt + G > Ctrl + Click on the Rounded Rectangle Shape to create a Selection
From there I am suppose to add a Stroke by right clicking on the object but that doesn't work. The only menu that pops up is a list of my layers. So, rather I select the Rounded Rectangle layer and then click Effects and select Stroke and then set the values for the stroke. Next I am suppose to add a blur.
Blur > Gaussian Blur but the Stroke ends up filling the entire object. No, I didn't set the Blur to like 1,000 it's only set to 5.9 . I tried this on an other computer and the same thing happens. I called Adobe but they were unable to assist even get as far as the Stroke.
i created a pflow, created a sphere and set motion blur, then enabled motion blur in the render menu, by object, and rendered a frame and wammo, motion blur.
next i right clicked on the sphere and un-checked enable for motion blur, then re-rendered and wammo on the pflow blurred.
then i tried to re-enable motion blur on the sphere's properties and the check-mark won't stick.
the only way to get that sphere to blur again is to blur all objects in the render motion blur settings.
I've read the manual as well. attached is the scene file, trying to enable motion blur on the purple sphere.
i can't seem to add the attachment, i'll try zipping it.motionblur.zip
Max Design 2014, Boxx Xtreme, Box RenderPRO, Win7Pro, K4000
can I snap an object/vertex/edge to another object straight in one axis?
I'm coming from Rhino 3d, where this is possible by holding the shift key.
3ds Max 2012 SP2
i7 2600
16GB RAM
Geforce 560ti OC