GIMP :: Silhouette Object In Image

Dec 7, 2011

If I want to cut out the background of an image and leave just the object how best can that be done?

I read in one of the threads to erase it out. Is there a better way?

i'm very new to gimp.

View 3 Replies


ADVERTISEMENT

GIMP :: How To Fill Silhouette With Image

Jan 1, 2014

how you fill a silhouette of a face with an image?

View 2 Replies View Related

GIMP :: How To Make A Silhouette

Apr 1, 2011

I have an image of a person, with a white background. How can I make this person image a silhouette? (and keep the white background)

View 5 Replies View Related

Photoshop :: Making Silhouette Of Image

Nov 26, 2011

I am trying to make a silhouette of the Ford Fair lane in the zip file attached below, and place it into the BANNER_ONE.psd document. This is for a contest (redesigning the banner), so I have attached the current banner as well (profile_header.jpg).

The requirements for the banner are as follows:

incorporate "the driver's seat of youtube" and "the most automotive variety" (DONE)incorporate featured in car and driver, perhaps with that October 2011 issue cover (DONE)incorporate something related to the make a wish foundation silhouette design possibly using the 65 fairlane.

So, what is the best way to trace a silhouette of the Fairlane, similar to the one in the original banner? I was thinking the Pen Tool, but seeing as how I'm on a laptop and don't have access to an external mouse until late tomorrow (I'm away for the weekend), that's not the best option at the moment.

View 2 Replies View Related

Photoshop :: Best Way To Create A Line Silhouette Of An Image

Feb 25, 2007

I have an image that has a set of curved lines in it. I want to keep just these lines from the image, and delete everything else.

Can people recommend what is the best way to accomplish this?

I know that i could use the pen tool to manually trace over these lines, and i don't need to preserve the color of the lines, so this would work. But it would be better to not have to do it manually.

I've successfully used the magic wand tool to select the area outside of these lines, and i can then invert the selection to select the area inside of these lines. This should put me about one step away from getting to where i'm trying to go, but i don't know what the final step should be.

View 2 Replies View Related

Photoshop :: How Do I Turn A Photo Into A Silhouette Image

Sep 10, 2005

I have a photo of a model that I want to turn into a silhouette image. I have tried different things that I could think of, just can't see to get the effect that I am looking for.

View 6 Replies View Related

GIMP :: Replicating Part Of Subject / Object In Image?

May 2, 2012

I have been using GIMp to do some basic things but have recent got a but stuck on how to best replicate part of a subject/object in an image. for example

I have an image of a corner of a building with the wall on the left and right, and sky at the top of the image. I would like to extend one of the walls out to extend the width of the image and also replicate the sky.

The walls are on a slight angle so I can not simply do a retangle block and copy/paste, also when I do this on the sky, the gradients of the paste dont match up nicely.

View 1 Replies View Related

GIMP :: Remove Unwanted Object In Coarse Sand In Image?

Aug 20, 2011

How do I edit sand and coarse textures, so well that even the experts can't find the edit?..

"Sand-brushes"..?

View 7 Replies View Related

GIMP :: Trim / Cut Around Object In Image And Have Cloud Or Blur Around Edge

Nov 11, 2013

I am trying to accomplish something but i am not sure of the correct terms to use to describe it. I would like to "trim" or "cut" around an object in an image and have a "cloud" or "blur" around the edge. I have included a link below with an example of what i am trying to accomplish from an ebay listing. If this is possible with gimp, if not with what other program?

[URL] .......

View 2 Replies View Related

GIMP :: Fit Object Into Picture Frame - Shrinking And Stretching Image

Feb 3, 2013

How does one take an image, shrink it, stretch it, make it smaller etc. Basically, I want to fit an object into a picture frame.

View 4 Replies View Related

GIMP :: Detection Of Object Boundaries In Raster Image And Automatic Creation Of Paths

Jul 2, 2012

GIMP script/plugin for detection of object boundaries in a raster image and automatic creation of corresponding paths?

View 2 Replies View Related

GIMP :: Filling White Object With Colour Whilst Keeping Rest Of Image In Grayscale?

Jul 31, 2011

My image is in grayscale though it's recognised as RGB. It contains structures in white which I would like to fill with a colour. So basically, I'd like for all the white in the image to show up as e.g. red.

How do I do that? I'm guessing it must be possible to have a red layer and somehow this will then fill the white, but I'm getting confused with background and foreground filling options and I don't know which transparency options I have to choose.

View 2 Replies View Related

Photoshop :: Silhouette?

Aug 21, 2007

how would you turn a regular pic into a silhouette? Or how else would you go about it?

View 2 Replies View Related

Photoshop :: Extracting Silhouette

Dec 10, 2007

I have an image that I would liked to get the shape from and enlarge to 24" (that is not the full-res image.). I am trying to extract the rings along with the torch, meanwhile making that pattern black and the background white. I can use the magic wand at certain tolerances to get it out, but, like the picture, the edges are not sharp, but pixelated. is there a way I can extract this shape but have very smooth and defined edges, even if the picture does not have them? im trying not to have to zoom in real far and use the lasso to outline the entire thing myself.

I might add that extract edges doesn't work too well on this image

View 4 Replies View Related

Photoshop :: Silhouette & Old Touches

Apr 8, 2006

how to make the silhouette effect below. I see it used on alot of projects and also used as a fake pencil drawing effect on paper.

Also interested in the minor old effect used in the red area's.

View 1 Replies View Related

Photoshop :: Filling Silhouette With Text

Apr 28, 2006

I made the following image in Illustrator by tracing an image and filling it with black to get the silhoutte. I then, used the type area tool to fill the silhouette with text.

Is there a better way to do this (in photoshop or illustrator)?

Also, how would I adjust the text to better fit (fill) the shape of the silhouette?

View 1 Replies View Related

Paint.NET :: Turn Photo Into Silhouette?

Feb 6, 2013

How to turn a photo into a silhouette (I think that's what it's called). How to go about doing it?
 
There's two styles I'm trying to do.  One is all one color, and the other is two colors kind of highlighting shady parts.  Here are the two examples:
 
[URL]

View 4 Replies View Related

Paint.NET :: How To Get Silhouette Out Of Ordinary Picture

Aug 14, 2013

I want to create a silhouette like the first picture from the other picture (of the boy) How can I do that? If it's youtube videos out there, but getting there does not, even if I regulate tolerance in magic wann tool.

Attached Thumbnails

View 2 Replies View Related

Illustrator :: Cut Plaid Design Into Silhouette?

Sep 11, 2012

I want the words and the man to be the plaid pattern instead of the solid black. Any clue how i do that?

View 3 Replies View Related

Illustrator :: How To Turn A Silhouette Into Outline

Oct 2, 2013

I need to create a line drawing of the outline of a chair. I tried following the various Illustrator tutorials to take the image of a chair and create a silhouette. However, I can't figure out how to take this silhouette and get just the outline of it. The Illustrator Image Trace tool doesn't seem to have an option to just save the outline.
 
Is there an easy way in Illustrator or Photoshop to turn this silhouette into an outline image that I can save as a file? I will print the outline in a very light opacity so that the lines are barely visible for hand rendering. I don't want to use the pen tool to outline the silhouette because my hand is too shaky to do a good job.

View 9 Replies View Related

Photoshop :: How To Change Body Silhouette Portions

Jun 6, 2011

I want to reduce the length of the legs a bit and straighten the back one out a bit.How can you go about this without changing a lot of the anchor points? Is there a way to select a portion of the leg or image and move it separately?

View 3 Replies View Related

Photoshop :: Quad Bike Silhouette For Tshirt

Jun 4, 2008

Im going on a "lads holiday" in 2 weeks and i have been given the job to create tshirts for the group. I used a shield design base from a video game and i am now creating new silhouettes for the different sections of the shield to reflect the holiday. Ive been trying to make a quad bike silhouette but every time i do it it comes out so badly that you cannot tell what it is actually meant to be.

View 1 Replies View Related

Illustrator :: AI CC Is Not Compatible With Silhouette Studio Plugin

Feb 12, 2014

After reinstalling multiple times, uninstalling Wacom drivers, etc. -- tracked it down to a plugin.The newest update for AI CC is not compatible with the Silhouette Studio plugin.
 
Not a happy camper over lost time and productivity, but fortunately I had my CS5 disks.

View 4 Replies View Related

Revit :: How To Remove Silhouette Of Lower Floors On Floor

Jun 19, 2013

I am trying to create a sheet of floor plans that does not show the next floor down on each floor plan but I can't seem to find out how to do it. My lecturer said it made the floor plans 'confusing and difficult to read' but other than photoshopping them out or something I'm stuck See attachments for exactly what I mean. I have just installed revit achitecture 2014.

View 2 Replies View Related

AutoCAD Inventor :: Silhouette Curve Gets Lost In Mold Design

Oct 23, 2012

I've created a silhouette curve in the plastic part, and marked it for export.

In mold environment, I need it as startup curve for the runoff surfaces. But whatever I try, it's always switching back to being not used.

View 2 Replies View Related

GIMP :: High Resolution File - JPEG Image Plug-in Could Not Save Image

Aug 18, 2011

So I am making digital color prints at 24x30. the photography work is about color fields and gradients, so I need super high res files. I have set the size to 24000x30000 pix at 1000 dpi..now my problem, when i go to save the gimp file as a jpeg i get this error message "JPEG image plug-in could not save image"

View 3 Replies View Related

GIMP :: Cutting Hole In Image Of TV Screen To Insert (layer Over) Image

Jul 25, 2012

I am making a video in Nero Vision 10 and need to cut out the screen of a tv so that I can layer the TV over an image/video so it looks as though it is on the screen. I enclose a screenshot of the project. 'Transform-tools-crop' only cuts in straight lines so I wonder which device I should use which can cut out an odd bespoke shape? You can see in the uploaded image from the project how the image currently cannot fill the frame without covering it.

View 7 Replies View Related

GIMP :: Overlay Portion Of Image With Faded Map With Non-transparent Part Of Second Image

Apr 4, 2012

I have a PNG image with only one layer as a start point. It has a faded map on it.

I have a second PNG image with a hex grid on it. I do colour to Alpha to establish transparency on the hex grid for white filled hexes (others are not filled with white).

Now, I wish to overlay a portion of the first image with the faded map with the non-transparent part of the second image.

So I select by colour (for the hexes not filled with white) on the second image (the overlay) and I then paste to the first image (after creating a transparency layer and selecting it to receive the overlay).

I see the desired overlay section (minus any transparent stuff as expected), however it is centered over the map in the first image, not where I want it to be. It is a floating selection and must be anchored. So I select the anchor icon in the layer dialog and I think I anchor it into the transparency layer on the first image (that's what I'm trying to do anyway).

And then my problem:

I want to move the thing I just pasted in to the right place with respect to the underlying faded map. I attempt to use the move tool, but all I move is the background map (pretty much the opposite of what I want).

Nothing I do seems to let me reselect the pasted-in overlay so that I can move it.

Why I can't ever reposition the pasted in overlay? It should be in the transparency layer I created but even if I select all, I don't seem to be able to move anything other than the background image.

View 2 Replies View Related

GIMP :: How To Use Bevel And Emboss Layer Effect On Image Copied From Another Image

Jul 19, 2013

I'm running Gimp 2.8.4 on Ubuntu 13.04 Linux (64-bit) and I'm trying touse the "Bevel and Emboss" layer effect on an image which I copied fromanother image. Here is what I've done:

1. Loaded image 'A' into Gimp
2. Selected a portion of it
3. Used "/Edit/Copy" to copy the selection
4. Used "/Edit/Paste As/New image" to create a new image from the selection
5. In the new window for the new image, "/FX-Foundry/Layer effects/Bevel and Emboss"
6. When the "Bevel and Emboss" window opens, I accept the defaults and click "Ok"

The filter starts to run and then stops with an error message. Here is the message I get:

------------ START ------------------

Bevel and Emboss Message

Error while executing script-fu-layer-effects-bevel-and-emboss:

Error: ( : 1) Procedure execution of gimp-selection-layer-alpha failed on invalid input arguments: Item 'Pasted Layer copy' (87) cannot be used because it has not been added to an image

----------- END -------------------

View 5 Replies View Related

GIMP :: Map To Object Filter

May 20, 2012

Got a problem here with the map to object filter, or maybe it's just a case of it can't do what I want it to. I thought it best to ask here to find out for sure.

 s.xcf (Size: 146.5 KB / Downloads: 30)

The circle at the top and in the foreground is the one that I want to map to a cylinder, but no matter what I do I can't seem to get ride of the other two circles, the one at the bottom and the one in the background. I can erase them after the mapping's finished but I was hoping to find a way to prevent them appear in the first place.

View 6 Replies View Related

GIMP :: Ability To Copy / Cut Image Or Part From One Open Image Into Another

Nov 25, 2013

I have been using gimp now for about 2 months and have just upgraded my OS to Mavericks and upgraded Gimp to 2.8.8.

Upon doing this I seem to have lost the ability to copy/cut an image or part thereof from one open image into another... Example:

I have an image window open with a picture a car and I have an image window open with a race track back ground.

I want to copy the car from image 1 into image 2, but for some reason I cannot do this function anymore. When attempting it, once the item is copies to the clipboard and I then swap to the second image, when I paste as a new layer it pastes the clipboard from that image and not the image from the first window...

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved