Illustrator :: Trim Off Edge From Object?
Jan 16, 2013
I have two intersecting objects, which I merged.
Problem is, that the merged object has a pertruding edge, which I want to trim off, but I can't. I tried drawing a rectangle over the unwanted part, but for some reason, the rectangle, or any path I try to make around that edge, it shifts to the left, as if it is snapping. I don't know if it is because I'm too zommed in, but there must be a way to intersect the two seamlessly...
See the image below
View 2 Replies
ADVERTISEMENT
Nov 11, 2013
I am trying to accomplish something but i am not sure of the correct terms to use to describe it. I would like to "trim" or "cut" around an object in an image and have a "cloud" or "blur" around the edge. I have included a link below with an example of what i am trying to accomplish from an ebay listing. If this is possible with gimp, if not with what other program?
[URL] .......
View 2 Replies
View Related
Jul 4, 2013
I have a rounded rectangle and an object on top of it -- how do I make it so that the parts of the object outside of the rounded rectangle are hidden?
View 5 Replies
View Related
Sep 27, 2013
I have a Photoshop image, which has been edited down to a shape of a person, with a transparent background. I would like to use this image in Illustrator, and do not need it to be vector, but would like the object to be shaped like the image, rather than a rectangle. How do I get the Illustrator to read the edge of the image as the edge of the object?
View 3 Replies
View Related
Apr 3, 2012
4621.CorelDRAW Clone Bug.mp4
Trim the master object and the cloned object gets deleted.The master object cannot be directly trimmed, so I grouped it with another object, which seems to enable the shaping tools. check if this behavior exists in X5 also.
I have inserted a clip about the problem. Maybe other users and the Corel staff will check it out.
View 2 Replies
View Related
Jul 26, 2011
how you can trim an object to the shape of the object on top?
View 9 Replies
View Related
Apr 16, 2013
I have pictures I've brought in from PS and traced them, when I go to overlap them, the white box from the images block the image behind it. How do I make everything around the image transparent so it doesn't block the rest of the objects/pictures..etc.
View 4 Replies
View Related
Apr 2, 2013
I am having trouble with a part that I am working on. Trying to trim to the tangent edge. I cant post the part that I am actually using, but here is an example of a similar problem. In the attached file, open the "Negative Part.ipt". The sketch 2 contains a line (unconstrained). I need this line to be tangent with the curve below it.
I can project the edge of the curve to my sketch plane, but not the tangent of the radius.
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 3.60ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1.1 (update1)
Vault Basic 2013, SP1
View 7 Replies
View Related
Mar 21, 2013
I am having some trouble trimming a line using a circle as my cutting edge,the line falls short of the circle,I have tried changing EDGEMODE and still the problem persists!
View 9 Replies
View Related
Sep 3, 2012
Let say I have a pot of flower I drew in Illustrator and I want to place it on a Perspective grid so that I will have half of the drawing snap on Left Grid in the perspective and another half snap to Right Grid?
Is there any easy way to do this without first slicing the artwork in half and place them individually?
View 2 Replies
View Related
May 21, 2012
[URL]
how to delete the certain parts of complex at once by using the single object above all of them.
View 3 Replies
View Related
Sep 26, 2012
How to trim the object using VB coding
View 3 Replies
View Related
Nov 14, 2011
untitled.jpg
Is there a way to convert those lines into plines, so i could extrude and cut.
View 6 Replies
View Related
May 18, 2012
I recieved several .stp files from a vendor and most of them imported without incident. One part is giving me a major headache though. The envelope of the solid body is much larger than the actual part. This is causing the origin to be skewed by several orders of magnitude. Any way to trim down the envelope to the part size?
Using IV2011 Pro.
View 6 Replies
View Related
Jan 4, 2012
can I snap an object/vertex/edge to another object straight in one axis?
I'm coming from Rhino 3d, where this is possible by holding the shift key.
3ds Max 2012 SP2
i7 2600
16GB RAM
Geforce 560ti OC
View 6 Replies
View Related
Aug 27, 2013
Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies
View Related
Oct 16, 2013
Whenever I try to trim or merge a gradient it only divides it, but when it's solid it works. Why? I'm trying to trim/merge some artwork with a lot of gradients and it's making it impossible. Any way to do this with gradients. Here is an image of what I'm talking about showing it working with solids, but not gradients.
<a href=[URL].....><img src=[URL]....></a>
View 2 Replies
View Related
Oct 12, 2012
Even though I checkmark Print > Marks & Bleed > Trim Marks they still don't print. I set Type > Roman and Weight > .5pt. I can get these to print?
View 4 Replies
View Related
May 9, 2013
I want to trim off the top of the lines in the picture below. I used white lines to cover the top to show you what look I wanted to achieve, However, I know that using white lines to cover it up is not a practical solution for my application. I know that I should be messing with the pathfinder tool but I just can't get it to work right for me. I am pretty new to illustrator and Photoshop.
View 2 Replies
View Related
Sep 19, 2013
I was given these instructions :
The booking is for a full page and the dimensions are as under: height 262mm x width 191mm, trim size height 278 x width 216 & add 5mm bleed on all sides.
When I create a new illustrator doc which dimensions should I enter? 262mmx191mm with 5mm bleed? or 278mmx216mm with 5mm bleed?
View 7 Replies
View Related
Sep 6, 2009
I'm trying to learn illustrator cs2 on my own and am having some issues with a few basic functions. I am drawing shapes using the rectangle, ellipses and trying to join them together. How do i trim 2 lines together to make a corner. I would like to cut off the exess at the ends by cutting to the other lines. I know this seems basic but I can't figure it out. In the end I want to make a figure using all the drawing tools ( pen, line, shapes etc) and have the outline just one feature.
View 8 Replies
View Related
Aug 26, 2013
I have a multi layer doc. Many of the vectors peek out of the artboards dimensions. I need a clean trim to the exact dimensions. I was playing with the shape finder but did not get the results I wanted. What is the best way to trim off any vectors outside the artboard.
View 8 Replies
View Related
Nov 19, 2013
So I am desinging a business card for a company I work for. The company we are sending them off too obviously needs to have the bleed and trims marks. The only thing I can't figure out is how do I make the bleed marks visible to them? When I print the document it shows me the trim marks but since I have a white background, it looks as if there is no border. Should I add a border to the actual Artboard?
View 4 Replies
View Related
Jul 2, 2012
In Illustrator CS5+, I'm looping through the objects in a document, exporting each of them to an image using exportArtBoardasImage(). They need to be trimmed afterwards, as they generally have a tonne of whitespace. Normally, I run an ImageMagick shell script (mogrify -trim). It'd be awesome if I could reproduce this functionality from within illustrator. I've seen people handle this by copy-and-pasting each object into a new file, sizing the artboard to that object, exporting, then closing the file. I'd rather not do this, as it's *way* too slow.
View 3 Replies
View Related
Jun 5, 2013
Any way to change the point size and length of trim/crop marks in cs5 above?
View 6 Replies
View Related
Oct 25, 2012
I'm working on designs in Illustrator and preparing an InDesign document with all of the graphics in one file for the client to review. The artboards are set to the size of a pier sign that will be all wood, but there are left graphics on the wood that will be laser cut and these extend beyond the edge of the wood. When I place the separate artboards in InDesign, they are cropped to the edge and I'd like to show how the left graphics extend beyond it. I've tried different import options but none of them show beyond the trim. (Also, if it makes a difference, the artboard sizes are fairly large—about 60" wide)
View 3 Replies
View Related
Mar 19, 2013
I am making a collage for a friend. I have all the pictures I want that I edited from photoshop and brought into illustator. I made an outline of a buffalo (he is from buffalo) using the pen tool. I filled it in with pictures but i need to know how to trim away the remainders of the pictures that go past the buffalo outline. Basically i need to delete everything that is outside the vector buffalo, but i am having a terrible time figuring this out. Im not sure if i need the trim away tool, draw inside or something else.
View 4 Replies
View Related
May 12, 2011
How do I snap my new line to the edge of another object? A workaround is drawing the line over the object, and snap the point back using intersection snapping. I hope you understand.
drawing.jpg
View 3 Replies
View Related
Apr 16, 2013
I'm trying to move an object 10 px left or right depending on which button they click on.
Ex. Click Button A and a square will move 10 px left. Click Button B and the same square will move 10 px right. Click Button B three times and the box will move 30 px right.. etc..
Also is there a wiki or faq sheet of all possible actions?
View 18 Replies
View Related
May 9, 2013
Is it possible to do transparency all around the edge of an object. say you had drawn a circle can you make the edge all around transparent or say make just the middle transparent?
I often find that I would love to fade out in more than one direction.
[URL]......
View 10 Replies
View Related
Jan 9, 2013
I have created a rectangle object with top right and bottom left corners set to 90px. I have an image that goes inside the box in the bottom left corner. The problem is I need the box to act as if it is using "Overflow Hidden" so I can position the image in the corner and have it partially "cut off" to fit the corner but It doesn't seem to be working when I set the overflow to hidden on the rectangle.
Also (part of my previous post earlier), is there a way to add/change the CSS code generated by Edge without messing anything up?I can write this in CSS and add it if I knew where and how (although I'd rather do it within the Edge interface).
View 16 Replies
View Related
