AutoCad 2D :: 0 Degree Is Vertical As 90 Degree
Jul 19, 2011
I received a drawing from a client, which has all the features on a coordinate system, But the drawing is rotated for some reason. Even after rotating the drawing the coordinates are the same as it was prior to rotation. I believe there may be some variables that has been changed for this. If a line is drawn A@100<0 it is drawn vertical instead of horizontal and like wise @100<90 is drawn horizontal instead of vertical.
Attached is the drawing.
View 3 Replies
ADVERTISEMENT
Aug 23, 2013
How to make Multi Leader end line landing or turn 90 degree vertical? I just want to use the leader point to the part and no text at the end of the leader. I guess the only way i know how to do right now is to exploded the M-leader and draw a line vertical down which is not recall proper way . Some people like to use just Leader not Multi leader but i like to use M-leader so i can enter the text in difference line. (See Pic below)
1e.jpg
View 2 Replies
View Related
Apr 6, 2013
what kind of curve is this (e.g. Bezier, B-spline, or NURBS) and how many degrees are this curve?
View 5 Replies
View Related
Apr 13, 2012
I'm using AutoCAD 2012 and I'm having a problem with 3D orbit. For some reason I can only rotate the view 180° along the X axis. Y and Z are fine, I can rotate a full 360°, but the X axis "bottoms out" if I try to rotate the view more than 180°. Is there something toggled that's causing this?
View 1 Replies
View Related
Aug 24, 2013
I have a simple solid channel of 260 m length (shape of rectangular drain), The bottom slab I wanted to tapered outward say by 1 degree. I used solid edit > face> taper> choose the bottom face, choose the axis (longer) and give the angle, then error shows
"No loop through new edges and vertices." sometimes
"Modelling Operation Error: Change in topology detected."
View 9 Replies
View Related
Apr 28, 2005
i was wondering if it is possible to draw a polynomial of the 4th degree in Autocad and if it is, how would i do this?
i was thinking along the lines of nurbs, but i don't know anything about nurbs!
View 4 Replies
View Related
Nov 22, 2013
I'm trying to sweep it around shape like this But it won't, it says "The selected path curve is not valid." - so what do I do? (it is polyline) Is there maybe some other way to get this 3D shape fast?
View 8 Replies
View Related
Aug 9, 2006
How to get the degree of curvature (DOC) for a curve in an alignment to be reported for Civil 3D 2007 like was reported in the 2006 version?
View 8 Replies
View Related
Aug 3, 2013
How to set a value and label the “degree of curvature” for the horizontal alignment (HA)?
As the radius of the circular alignment (R) is calculated from the “degree of curvature” (attached) then I couldn’t figure out how to select a particular value for the “degree of curvature” (R=1718.8/Da) and then to label the horizontal alignment with it.
View 9 Replies
View Related
Aug 8, 2007
I am trying to create an expression so that I can put the Dc into my alignment curve label. I am using (5729.58/Radius) for the expression and using Double for the format which comes out fine in decimal form as in a curve with a 200' R comes out to be 28.6479º, the problem is that I need it to come out as Angular DMS... when I switch the format to angle it comes back as 1641º24'14".
View 4 Replies
View Related
Dec 19, 2013
easier way to program 45 degree corners on the top flange of two mating parts. We can't bend the ends on so they have to be welded. I am using inventor 2014 professional. Almost all my programming is done in sheet metal.
View 2 Replies
View Related
Oct 16, 2012
I'm trying to join a helix onto a 90 degree bend but I can't get the 2 ends to marry up.
I am self taught so I don't know all the commands but I understand the concept from using Maya / 3Ds Max in the past.
Also why do I see the diagonal lines at the end of the 90 degree?
Ihelix.jpg
View 9 Replies
View Related
Dec 1, 2012
Took a quiz and give us a drawing of a pipe bending on 90 degree.
View 9 Replies
View Related
Jan 3, 2012
I'm trying to draw the following bench in Autocad but I'm getting bogged down trying to figure out how to create the following tube with an angle on it and how to achieve different shapes at the top of tube.
View 9 Replies
View Related
Nov 14, 2011
untitled.jpg
Is there a way to convert those lines into plines, so i could extrude and cut.
View 6 Replies
View Related
Jan 16, 2010
How do I go about increasing the diameter to a degree symbol? Am using the ROMANS.SHX type of file, and when used the degree symbol is sort of miniature (looking and plotting) in comparision to the numeral next to it.
What number do I have to alter in the .SHX file to enlarge it then?
View 9 Replies
View Related
Dec 6, 2012
I want to make this part that bend 15 degree at 800 mm from bottom. In my attempt.
First, I bend it 15 degree.
And, make flange from Face and upper flange then I stuck with error.
View 1 Replies
View Related
Jan 25, 2012
I am having trouble 3d modeling an 8" to 6" reducing elbow.
View 8 Replies
View Related
Aug 10, 2013
How to label the curve with its degree of curvature (Da)?
Degree of curvature (Da) can be calculated based on two different ways
Arc definition (considering 30 meters arc length):
Da=1719.74/R
Chord definition (considering 30 meters chord length):
Da=ASIN(50/Radius)*2
The issue here is that there is not built in option to label the curve with its degree of curvature.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 9 Replies
View Related
Oct 1, 2013
I am in C3D 2012 and using Romans.shx for my text. When labeling an Arc, the degree symbol comes out too close to the following text/number. Is there any way to adjust the spacing on curved text. On a straight line it looks fine.
View 4 Replies
View Related
Jul 23, 2012
We are using Autocad 2012 & some of our users can not put Degree, Diameter, Plus/Minus Symbols in their drawings.%%P, %%D, %%C does not work in single line or M-Text. The symbols work In dimensions.
View 3 Replies
View Related
Apr 6, 2012
I was just wondering if there is an easier method of getting a 45 degree corner on flanges of 2 different sizes. 1 flange is 1" and the other is .75". I have been cutting the .75" flange down and adding to the face of the 1" flange.
The corner I'm talking about is on the far right of the part.
View 2 Replies
View Related
Dec 3, 2013
I am trying to make a toilet paper roller; standard white ones with the spring inside [URL] .
I need to cut the bottom of the cylinder at a 45 degree angle from the center to wall so if the roller was standing, it would be at an angle of 45 degrees to.
I have attatched what I have so far.
I am having trouble with the slicing. I am not sure how to chop the whole cylnder at an angle.
Also how do I remove the yellow lines and the white line with the measurement .1280 (you'll understand when you open the file)
View 9 Replies
View Related
Oct 18, 2012
I am trying to make a cut on a 12" D cylinder at a 45 degree angle and i am having a little trouble. I have projected the shape onto the curve and sketched it. Now to finish the cut do i need to scuplt that path or how do I go about doing this.
I provided a screen print to try and and explain it a little batter. The half moon looking sketch is what i am tring to cut out of the cylinder. i have already projected the surface lines on the cylinder, but get stuck at this point
View 7 Replies
View Related
Jun 18, 2012
I am have a problem. How do you create a cylinder with a flat end on one side and on the other side have it at a 45 degree angle.
View 4 Replies
View Related
Jul 31, 2008
Ive got a problem with a drawing from a client and the text is in multi-line format and is currently at the correct angle, however, when I go to edit the text is rotate's it's self round 270 deg....
View 9 Replies
View Related
Dec 13, 2012
All I want to do is rotate one dimension. I want to leave all the others alone.
When I am editing my drawing, I double click on the dimension and get the diag box and unfortunately the rotate dimension command along with the degree box is grayed out.
View 2 Replies
View Related
Dec 26, 2012
What's the best way to model an alley with a 90 degree angle (turn). Do I treat it as an intersection with a zero radius? My typ section is 15 feet width with a 4% slope down to the center of pavement. "V" bottom. Not sure how to get it to model the outside corner and also eliminate the inside overlay.
View 8 Replies
View Related
Aug 1, 2013
I am trying to have iLogic change the custom property format for my user parameters. I am able to work with linear measurements, but I would like to also work with angular measurements. I want my angular units to be "Degrees" the format to be "Deg-Min-Sec" and the precision to be DD MM.
Below is my code to change the units to deg, but I can't change the format or precision:
Dim oPartDoc As PartDocument
oPartDoc = ThisApplication.ActiveDocument
Dim oParameter As Parameter
Dim oFormat As CustomPropertyFormat
[Code]....
View 1 Replies
View Related
May 7, 2010
I'm trying to create a dynamic block for plywood. I have the stretch parameter working so that I can stretch the plywood to the needed length. I also have set a rotation parameter based on the various roof pitches that we use. The problem is I would like to be able to rotate the sheathing to a 45 degree angle and then stretch along the 45 degree angle. Once I rotate the sheathing the stretch does not follow the rotation angle. I have attached the file.
View 9 Replies
View Related
Apr 15, 2012
How to get the correct notation for the angle in degree/minute/second?
I wanted to show the angle as 29˚12’13’’ but not as 29d12’13’’
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 3 Replies
View Related
