Ive got a problem with a drawing from a client and the text is in multi-line format and is currently at the correct angle, however, when I go to edit the text is rotate's it's self round 270 deg....
View 9 RepliesI'm trying to create a dynamic block for plywood. I have the stretch parameter working so that I can stretch the plywood to the needed length. I also have set a rotation parameter based on the various roof pitches that we use. The problem is I would like to be able to rotate the sheathing to a 45 degree angle and then stretch along the 45 degree angle. Once I rotate the sheathing the stretch does not follow the rotation angle. I have attached the file.
View 9 Replies View RelatedI would like to find a way to edit multiple text boxes in inventor instead of one at a time.
For example, in autocad, when multiple text boxes are selected, any values that are different in the properties window are represented as "varies".
Is there a way to select multiple text boxes and do things such as change the text height, justification, font, etc, just as it works in autocad?
I like to think of myself as pretty competent in AutoCAD but I can't figure this one out for the life of me...
I hope I can explain this clearly: When I rotate an object using grips, the object is not shown spinning in real time. I select the object, pick the object's grip, hit <Enter> <Enter> to go into the rotate command and the object will rotate maybe 45^ or so and freeze (visually).
If I use the command line "Rotate" command, the selected object(s) spin in real time or if I use grips to rotate but then use an object snap, it begins to spin in real time for some reason.
I would like to use grips to rotate my objects and be able to see them rotate (like I used to in previous releases).
I have ACAD Civil 3D 2010.
if it is possible to rotate multiple images at one time as suppose to having to rotate each separately?
View 5 Replies View RelatedI received a drawing from a client, which has all the features on a coordinate system, But the drawing is rotated for some reason. Even after rotating the drawing the coordinates are the same as it was prior to rotation. I believe there may be some variables that has been changed for this. If a line is drawn A@100<0 it is drawn vertical instead of horizontal and like wise @100<90 is drawn horizontal instead of vertical.
Attached is the drawing.
I know this is located in other locations but I can't seem to make it work with my block.
I would like the cross and the text N to rotate independantly of the arrow while the N stays with the thick line. That's the easy part. How can I make the N move along the rotation path and keep the text aligned horizontally? I read something about linked action and move, but I can't make it work.
I know I can rotate text with the rotate command or from the properties palette, but if I'm editing text and the text formatting toolbar is displayed, why don't I have the ability to modify the rotation right there? How do I get it there? Can I customize this toolbar?
View 3 Replies View Relatedwrapping a continuous line of text around a 90 degree bend. The third attached image is exactly what I need it to do. That is something I just put together as an example though.
I have some repeating information that I want to wrap around the border of an image. Being that it is repeating information, the text can also look like the first and second image uploaded, where part of the word is cut off. I would prefer this to be minimal though.
So far all I have found in my time searching on this leaves the words distorted.
No matter the complications, this also needs to be scripted. It is not feasible to do this manually as the repeating information is dynamic.
EDIT: The upload for the thumbnails is off.
Added Details.Attached File(s) textwrap2.jpg (8.9K)
Number of downloads: 19 textwrap2.jpg (8.9K)
Number of downloads: 17 textwrap.jpg (8.38K)
Number of downloads: 7
Is it possible to have text that you can rotate in a MVB similar to a dynamic block?
I tried to create a dynamic block within a MVB but doesn't work.
this is connected to the other post about tagging a MVB
I'll start by saying that I'm using Civil 3D 2012...I've made a custom line type and am having issues with it. Basically, I'm trying to get the text (Green line with 4's) to flip around from it's current orientation, see attachment. I have already tried the REVERSE and MIRROR commands, with no success.
View 6 Replies View Relatedwhat i have is a section cut that my Mechanical guys use. What i am trying to do is create a dynamic block using the rotate parameter.
Currently i have two rotate parameters. One to rotate the section cut lines around one bit of text. The second parameter is to rotate another bit of text, but this is also selected in the first parameter.
It is almost working... with the exception that when i use the main rotate grip everything rotates around the text i want it to, but the second bit of text rotates 180° the opposite direction.
I have attached a copy of the file.
I am inserting a block (strSectionBlk) into an AutoCAD 13 drawing using VB .NET. This block has an attribute with tag "FAB_HEIGHT" and I want to edit its string to the value of a variable "strFabHeight" at the time of the insertion of the block. The insertion of the block is fine but I've failed to edit the attibute.
Public Sub InsertSection()
'Call the Function that decides the name of the head section block strSectionBlk
getSectionDwg(strModel, strHeadType)
'Start the database
Dim db As Database
[code]....
I'm getting very long run times to edit x refs in place. Once the exref drawing opens, sometimes after 2 or three minutes, and I make my edit, It can take ten minuted to close the xref.
Drawing are clean, purged, -purged, recovered audited. Computer is new workstation and dedicated to CAD only. Very little opportunity for corrupted files.
SO difficult to see the text change and determine if it is at the right angle when the original text is still there.
How can I only display the new "Rotating Text" without the "Original Position" text.
I am working on creating a dynamic block library and am having several problems with text within my blocks. For example... I am working on a North Arrow block and would like the text to rotate with my block, but I want the text to remain right-side up. When I rotate the arrow past 180 degrees the text is upsidedown.
View 1 Replies View RelatedIm using AC 2008 LT Im developing dynimc blocks. When rotating the block the text will rotate as well. Is there any way to align the text to the view so it will be always straight when rotating?
View 3 Replies View RelatedI'm using Civil 3d 2013. When i go to edit my text, it rotates, making it impossible to read or edit. How can I stop it from rotating. I am editing the text through a rotated (DVIEW) viewport. When I try to switch to mtexted ---> oldeditor, I get the message
"The text contains new formatting and cannot be edited by your current MText editor."
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
I have attached a basic PTZ block and what I want it to do is when I rotate the block past a certain point +/-90 degrees the text rotate within the rectangle so it's never upside down.
Can I get any direction on what route I need to take to get this done?
I would like to create a number wheel with the numbers at 90deg to the circle but I cannot find any way to achieve this and it seems like something that should be doable within the text to curves feature.
Here is an example of what i would like to achieve.
Gave a set of schematics to a client and they decided they wanted all the wire numbers rotating 90 degrees... In the interest of efficiency, any way I can rotate all the pieces of text at the same time whilst maintaining their individual position rather than selecting a base rotation point (as I have about 400 wire numbers to make my way through ).
Untitled.jpg
I have been unable to rotate the header text in a parts list. I created a new text style that is rotated 90 deg, a new part list style that specifies to use that text style in the header. Everything else about the text in the header displays correctly (i.e. font, size, colour, etc) but not the rotation when I insert the parts list in a drawing using the correct standard. When I apply this same standard to a regular text line on the drawing it will rotate the 90 degs but not in the part list.
Inventor 2011 SP2
What I want this block to do is to keep the "REF. NORTH" text aligned and properly spaced whithin a single motion while rotating it with the thick line.
AutoCAD LT 2012
Windows 7 - 64 bit
1. when I edit or create text in a particualr drawing, I can't keep the editor from rotating 90 degrees.
I've tried creating a new style and it does the same thing both in model space and in Paper Space.
2. in a new drawing, the editor jumps out of drawing area on right side of drawing space by default.
I have been capturing data for measured building surveys with a Leica total station (TS06). When I upload the data into autocad i can see the node points (+) and text in the top view. When switch to look at the points from the front view (to produce an elevation), the text and points appear as a flat line, although the insertion point of the node/text is still correct. I need to find a way of rotating the text and points so they are visible in this view. I will then flatten the points and cut them to the top view to produce a 2d elevation.
we had a toolbar with a button to perform this function. However, now i don't have the toolbar,
I am trying to find a lisp routine that would allow me to rotate single letter text around a central point but keep the text (letters) horizontal as I rotate the letters about that central point. Is there anything out there that could accomplish this.
View 9 Replies View RelatedI would like to globally rotate an attributes text to be horizontal. When a block containing and attribute is inserted at a rotated angle the attributes text is of course also rotated - The tag is called circuit so I tried this - need some lisp to alter the size of the text?
(prompt "
Pick your Blocks..")
(setq ss (ssget '((0 . "insert")))
sl (sslength ss)
[Code] ......
having tried this which did not work
(prompt "
Pick your Blocks..")
(setq ss (ssget '((0 . "insert")))
sl (sslength ss)
[Code] .....
I am working on Dynamic Simulation. I ran the simulation for 4 secs, in real time it took more than 4secs but on the screen it was showing it ran for 4 secs. Is it correct? Can we edit settings to make it run for real time 4 secs?
View 2 Replies View RelatedI have a picture, I am looking to take one pixel of color and copy it nearby over another pixel. How do I do this? try to inform me about the exact brush and size I need to select as I cannot figure out the correct combo to do so.
View 1 Replies View RelatedWhen I attempt to set a specific capture time, it behaves just like LR4.x but NOTHING CHANGES after hitting "Change".
The progress bar at the upper left of the screen appears briefly as though the changes are being made, but when going back to edit, again the capture time remains unchanged.
How do I edit multiple layers all at once, the images is phpBB forum images and they look the same at the edges but have different graphics in the middle, I want to edit the edges of the small Icons all at once.
View 1 Replies View Related