AutoCAD Civil 3D :: Text Rotating When Editing
Nov 13, 2013
I'm using Civil 3d 2013. When i go to edit my text, it rotates, making it impossible to read or edit. How can I stop it from rotating. I am editing the text through a rotated (DVIEW) viewport. When I try to switch to mtexted ---> oldeditor, I get the message
"The text contains new formatting and cannot be edited by your current MText editor."
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
View 1 Replies
ADVERTISEMENT
Oct 9, 2010
1. when I edit or create text in a particualr drawing, I can't keep the editor from rotating 90 degrees.
I've tried creating a new style and it does the same thing both in model space and in Paper Space.
2. in a new drawing, the editor jumps out of drawing area on right side of drawing space by default.
View 7 Replies
View Related
Aug 29, 2011
I know this is located in other locations but I can't seem to make it work with my block.
I would like the cross and the text N to rotate independantly of the arrow while the N stays with the thick line. That's the easy part. How can I make the N move along the rotation path and keep the text aligned horizontally? I read something about linked action and move, but I can't make it work.
View 9 Replies
View Related
Nov 1, 2012
I know I can rotate text with the rotate command or from the properties palette, but if I'm editing text and the text formatting toolbar is displayed, why don't I have the ability to modify the rotation right there? How do I get it there? Can I customize this toolbar?
View 3 Replies
View Related
Feb 3, 2011
Is it possible to have text that you can rotate in a MVB similar to a dynamic block?
I tried to create a dynamic block within a MVB but doesn't work.
this is connected to the other post about tagging a MVB
View 1 Replies
View Related
Jun 4, 2013
I'll start by saying that I'm using Civil 3D 2012...I've made a custom line type and am having issues with it. Basically, I'm trying to get the text (Green line with 4's) to flip around from it's current orientation, see attachment. I have already tried the REVERSE and MIRROR commands, with no success.
View 6 Replies
View Related
Jan 27, 2012
what i have is a section cut that my Mechanical guys use. What i am trying to do is create a dynamic block using the rotate parameter.
Currently i have two rotate parameters. One to rotate the section cut lines around one bit of text. The second parameter is to rotate another bit of text, but this is also selected in the first parameter.
It is almost working... with the exception that when i use the main rotate grip everything rotates around the text i want it to, but the second bit of text rotates 180° the opposite direction.
I have attached a copy of the file.
View 1 Replies
View Related
Jan 16, 2014
SO difficult to see the text change and determine if it is at the right angle when the original text is still there.
How can I only display the new "Rotating Text" without the "Original Position" text.
View 8 Replies
View Related
Jun 26, 2013
I dont know if its the UCS thats twisting or something else thats happening . If you look at the screen print i attached you can see that the view cube is orthogonal but the cursor is slightly rotated. If i restart my computer this will not be the case.
Then the cursor and the view cube both will be orthogonal. But after a while, for no reason it will rotate again and I have to restart my computer!
View 4 Replies
View Related
Jul 11, 2011
I am working on creating a dynamic block library and am having several problems with text within my blocks. For example... I am working on a North Arrow block and would like the text to rotate with my block, but I want the text to remain right-side up. When I rotate the arrow past 180 degrees the text is upsidedown.
View 1 Replies
View Related
Jan 3, 2012
Im using AC 2008 LT Im developing dynimc blocks. When rotating the block the text will rotate as well. Is there any way to align the text to the view so it will be always straight when rotating?
View 3 Replies
View Related
Aug 30, 2011
I have attached a basic PTZ block and what I want it to do is when I rotate the block past a certain point +/-90 degrees the text rotate within the rectangle so it's never upside down.
Can I get any direction on what route I need to take to get this done?
View 1 Replies
View Related
Nov 15, 2013
I would like to create a number wheel with the numbers at 90deg to the circle but I cannot find any way to achieve this and it seems like something that should be doable within the text to curves feature.
Here is an example of what i would like to achieve.
View 9 Replies
View Related
Oct 10, 2012
My company has just upgraded from stone age AutoCAD to Civil3d 2013 and I've been tasked with figuring out the program.
What I am trying to do is realign my drawing so a line I drew is horizontal to the page. For example, I have a line at a 45 degree angle and I want to rotate my viewport so that line is now at a 0 degree angle. Is there a simple way to do this?
A follow up: I have my point labels set to be a 45 degree angle, will they be at a 45 degree angle when I realign the drawing or will they "rotate" along with the drawing?
View 9 Replies
View Related
Jul 25, 2013
I had an issue where I dropped points into my drawing for a survey and they weren't at the distance compared to recorded plat. I have checked the points mathematically, and they were dead on. A coworker suggested that I WBLOCK the points I was working with that way I don't move single points out of place. I disagreed, because the way i move points is I use the TOOLSPACE and move them as a group. So what I did was to drop the points again and now they were dead on the second time. I don't like turning points into a block due to the fact that it messes up my drawing.
View 6 Replies
View Related
Jul 31, 2008
Ive got a problem with a drawing from a client and the text is in multi-line format and is currently at the correct angle, however, when I go to edit the text is rotate's it's self round 270 deg....
View 9 Replies
View Related
Sep 9, 2013
Gave a set of schematics to a client and they decided they wanted all the wire numbers rotating 90 degrees... In the interest of efficiency, any way I can rotate all the pieces of text at the same time whilst maintaining their individual position rather than selecting a base rotation point (as I have about 400 wire numbers to make my way through ).
Untitled.jpg
View 2 Replies
View Related
Mar 8, 2013
I was using this in 2011 to match label rotation of an existing point but it no longer works in 2013? What is the value I need to grab and set or will this format not work in 2013,
(defun c:mro (/ doc ss ss2 obj obj2 newrot oldrot)
(vl-load-com)
(setq doc (vla-get-activedocument (vlax-get-acad-object))) (vla-startundomark doc)
(princ "
Select point to match the rotation of to: ")
(setq ss2 (ssget "" '((0 . "AECC_COGO_POINT"))))
(setq obj2 (vlax-ename->vla-object (ssname ss2 0)))
[code].....
View 3 Replies
View Related
Apr 10, 2013
Imported points and I have a label style to label tree sizes automatically, but when there are many trees near each other labels start to overlap. So I will typically rotate the label style 180 degree or drag the label, but I am curious if its possible to have label always stay horizontal no matter what my rotation angle is.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
View 8 Replies
View Related
Jan 8, 2014
I am trying to rotate a database through translate survey database and after I input all of my info (rotation basepoint etc.) it is rotating all of the points no where near where they are suppose to be. I was experimenting with the command a bit using various rotation angles, and it seemed to work at first, but I got out of my drawing without saving and got back in and I tried to do it again using the same rotation base point etc. the location of the points are all out of whack now. Did I do something unintentionally to the points or do I maybe have to re-import the fieldbook?
I thought not saving the drawing would be a safe way to not save any of my translating....
View 3 Replies
View Related
Nov 24, 2011
I have been unable to rotate the header text in a parts list. I created a new text style that is rotated 90 deg, a new part list style that specifies to use that text style in the header. Everything else about the text in the header displays correctly (i.e. font, size, colour, etc) but not the rotation when I insert the parts list in a drawing using the correct standard. When I apply this same standard to a regular text line on the drawing it will rotate the 90 degs but not in the part list.
Inventor 2011 SP2
View 1 Replies
View Related
Jun 25, 2013
What I want this block to do is to keep the "REF. NORTH" text aligned and properly spaced whithin a single motion while rotating it with the thick line.
AutoCAD LT 2012
Windows 7 - 64 bit
View 7 Replies
View Related
Nov 25, 2013
I imported survey data and had auto lines drawn. then I rotated my points/nodes. -- how do i get my linework to update?
View 4 Replies
View Related
Sep 21, 2013
I have some imported points and a polyline created with those.
When i try to rotate the pline around a point it seems that some edges are locked?
Even if I copy this pline in an empty area alone and try to rotate it again i get the same resulsts.i tried the move comand with a vertex as a base and the same reults.
I do not know where the edges are locked .
View 6 Replies
View Related
Feb 29, 2012
By rotating points elevations change too!? I wonder what I am doing wrong!?
Just starting using Civil 3D 2012 version.
View 4 Replies
View Related
Oct 30, 2013
I have been capturing data for measured building surveys with a Leica total station (TS06). When I upload the data into autocad i can see the node points (+) and text in the top view. When switch to look at the points from the front view (to produce an elevation), the text and points appear as a flat line, although the insertion point of the node/text is still correct. I need to find a way of rotating the text and points so they are visible in this view. I will then flatten the points and cut them to the top view to produce a 2d elevation.
we had a toolbar with a button to perform this function. However, now i don't have the toolbar,
View 2 Replies
View Related
Nov 7, 2012
I am trying to find a lisp routine that would allow me to rotate single letter text around a central point but keep the text (letters) horizontal as I rotate the letters about that central point. Is there anything out there that could accomplish this.
View 9 Replies
View Related
Oct 27, 2012
I would like to globally rotate an attributes text to be horizontal. When a block containing and attribute is inserted at a rotated angle the attributes text is of course also rotated - The tag is called circuit so I tried this - need some lisp to alter the size of the text?
(prompt "
Pick your Blocks..")
(setq ss (ssget '((0 . "insert")))
sl (sslength ss)
[Code] ......
having tried this which did not work
(prompt "
Pick your Blocks..")
(setq ss (ssget '((0 . "insert")))
sl (sslength ss)
[Code] .....
View 9 Replies
View Related
May 14, 2013
So I have a survey of a roadway that was created 15 years ago and was converted into autocad civil 3d 2012. No problems there, however, I am going through the survey and rotating the COGO points (ie Traffic Signs, Utility Poles) and the text to be parallel to the roadway. I am in UCS World and have no problems rotating the points and text to what I want. THe problem starts when I rotate the drawing using UCS 3P so that I am looking at a portion of the roadway that is parallel to my computer screen. Now the text and orientation of the signs etc are no longer parallel to the roadway and did not rotate when I rotated the entire project.
Now I was under the impression the points were to rotate automatically to what I set them as, ie parallel to the roadway. I'm sure this is an easy fix or I am not understanding something.
View 1 Replies
View Related
Oct 12, 2004
I was given a disc with 75 pictures on it to deal with. The images are scans of old photos, and many of them are scans of a whole page from an album. There is handwriting on many of the photos/pages that I want to keep intact.
My big problem is this: Many of the photos/album pages were scanned in a way that makes it neccesery for me to rotate/flip them into proper position. When I rotate them, the handwriting comes out backward/mirrored.
I kind of recall running into this before on an unimportant somethingorother I was working on, but since it wasn't important I left it be.
View 2 Replies
View Related
Jun 29, 2008
how do you rotate text without distortion - cs3 photoshop?
am using layers, one layer is a text layer, i want to rotate that, say 8º but without distortion in the letters.
View 13 Replies
View Related
