SO difficult to see the text change and determine if it is at the right angle when the original text is still there.
How can I only display the new "Rotating Text" without the "Original Position" text.
I followed the tutorial linked below to successfully create cartoon text.
My Macbook was then updated to Lion and I checked I had the latest version of GIMP and have been trying all morning to create some more text in the same manner.
However no matter what I do when I select the layer that contains the single letter and I try to rotate it nothing happens?
If I do Alpha to Selection the selection rotates but then I cant do anything with it, stoke fill etc?
To clarify this is what I do:
Create a word
select a letter in the word
ctrl-x
ctrl-v
select new layer
name the new layer to match the letter just cut and pasted
ensure that layer is selected
choose rotate tool
....no rotation takes place?
[URL] ..........
I know this is located in other locations but I can't seem to make it work with my block.
I would like the cross and the text N to rotate independantly of the arrow while the N stays with the thick line. That's the easy part. How can I make the N move along the rotation path and keep the text aligned horizontally? I read something about linked action and move, but I can't make it work.
I know I can rotate text with the rotate command or from the properties palette, but if I'm editing text and the text formatting toolbar is displayed, why don't I have the ability to modify the rotation right there? How do I get it there? Can I customize this toolbar?
View 3 Replies View RelatedI would like to create a number wheel with the numbers at 90deg to the circle but I cannot find any way to achieve this and it seems like something that should be doable within the text to curves feature.
Here is an example of what i would like to achieve.
I have created my Animation:
The stage size you see above is H: 400px, W: 550px.
I would like for the stage to be smaller, say H:50px./W:400px
Ok so if I change the size of the stage the animation text will not show, so I need to adjust the position of the text in order for the animation text to be visible, but in doing that, I am disrupting the timeline and the animation goes all funny, is there another way of doing this without disrputing the timeline?
in Autocad when you change the justification of text the insert snap of the text stays fixed and the text changes position around this point.
Using the JUSTIFYTEXT command you can change the justification of the text without changing its position. However this command is operated through the command bar of dynamic input. What I would like to do is to have the justification change in the quick properties this way.
NOTE: This is in AutoCAD 2002.
I'm working on one of our standard layouts for a client. Our typical drawing setup is the base drawing file, surrounded by our Xref'ed border. On said border Xref, we have all the information that does not change between drawings (Revision history, address of job site, etc). The only things that change - and, thus, are not on the xref - are the title of each individual sheet and their number; in the case of these objects, they are located on the drawing file itself in the appropriate position. They are, however, the same font as the text in the Xref - "Standard". Or, at least, they're supposed to be.
The text in the base drawing file seems to be a different version of the text from the Xref - a much blockier, sharper-edged version than the Xref text. My first response was "Okay - I'll just copy/paste the text from the border into my base drawing file, and force the existing text to match the properties of the imported text."
This, however, did not work. The imported text automatically assumed the same form as the existing text. Here's a screenshot from the base drawing, illustrating this (The "Mechanical Plan" also exists on the base drawing, and not the Xref):
I copied the existing text from the base drawing (In this case, the "Mechanical Plan") and pasted it directly into the Xref itself, to see what would happen. Apparently, it wants to stay blocky:
In the latter example, I even tried to force the blocky text to assume the properties of the smooth text via MA (Match properties). I specifically need to make the text in the base drawing conform to the style that the text is assuming in the Xref - which is to say "Smooth."
i switched gimp 2.6 to 2.8 and new text tool behaves strangely, as i remember in gimp 2.6 when i try to change text content with selecting old text and pasting new text i could use same text size and same font with my old text without doing anything but now in the gim 2.8 whenever i try to change content of a text layer i need to choose again font and text size from toolbox options, but why do i have to do this, i have a text placed on my image with a certain font and certain font size and i just want to alter my text conten not the size of text or font , it changes automatically to back text size and font whatever i used last time in another work.
summary: i want to change my text content without setting my font and font size properties, i want to use my text layers old properties
After closing and reopening my command prompt, I find that it is now at the bottom left of the screen and no longer part of the main graphics window. How can I get it to display at the bottom of the main display?
View 9 Replies View RelatedIs it possible to have text that you can rotate in a MVB similar to a dynamic block?
I tried to create a dynamic block within a MVB but doesn't work.
this is connected to the other post about tagging a MVB
I was given a disc with 75 pictures on it to deal with. The images are scans of old photos, and many of them are scans of a whole page from an album. There is handwriting on many of the photos/pages that I want to keep intact.
My big problem is this: Many of the photos/album pages were scanned in a way that makes it neccesery for me to rotate/flip them into proper position. When I rotate them, the handwriting comes out backward/mirrored.
I kind of recall running into this before on an unimportant somethingorother I was working on, but since it wasn't important I left it be.
how do you rotate text without distortion - cs3 photoshop?
am using layers, one layer is a text layer, i want to rotate that, say 8º but without distortion in the letters.
I'll start by saying that I'm using Civil 3D 2012...I've made a custom line type and am having issues with it. Basically, I'm trying to get the text (Green line with 4's) to flip around from it's current orientation, see attachment. I have already tried the REVERSE and MIRROR commands, with no success.
View 6 Replies View Relatedwhat i have is a section cut that my Mechanical guys use. What i am trying to do is create a dynamic block using the rotate parameter.
Currently i have two rotate parameters. One to rotate the section cut lines around one bit of text. The second parameter is to rotate another bit of text, but this is also selected in the first parameter.
It is almost working... with the exception that when i use the main rotate grip everything rotates around the text i want it to, but the second bit of text rotates 180° the opposite direction.
I have attached a copy of the file.
I'm in the process of creating a textual watermark for my photos in photoshop but have come across a big problem.
I am using the horizontaly text mask tool but I cannot rotate nor center (both horizontally and vertically) my text before turning it into a layer.
If I rotate and center the text after putting it into a new layer it wont work since the text will move and leave the writing embossed onto the picture.
I would like to cut out a perfect circle on a digital picture and rotate text around the circle. I have not been able to find a clean way of doing this.
View 2 Replies View RelatedI have seen several posts about rotating a view on a sheet and the text not remaining readable.
I have seen the posts that say to rotate the view then add text... What if you didn't plan that far ahead - are you just stuck?
Is there any new developments on this?
I have a client who needs to be able to this without having to rotate all the text in the project.
I am working on creating a dynamic block library and am having several problems with text within my blocks. For example... I am working on a North Arrow block and would like the text to rotate with my block, but I want the text to remain right-side up. When I rotate the arrow past 180 degrees the text is upsidedown.
View 1 Replies View RelatedIm using AC 2008 LT Im developing dynimc blocks. When rotating the block the text will rotate as well. Is there any way to align the text to the view so it will be always straight when rotating?
View 3 Replies View RelatedI'm using Civil 3d 2013. When i go to edit my text, it rotates, making it impossible to read or edit. How can I stop it from rotating. I am editing the text through a rotated (DVIEW) viewport. When I try to switch to mtexted ---> oldeditor, I get the message
"The text contains new formatting and cannot be edited by your current MText editor."
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
I have attached a basic PTZ block and what I want it to do is when I rotate the block past a certain point +/-90 degrees the text rotate within the rectangle so it's never upside down.
Can I get any direction on what route I need to take to get this done?
I need to create a text with a rectangle background and a coloured border around this rectangle. Here is what I do:
- I create a text
- I select the text and add a fill and a stroke that I then transform into a rectangle
- I now have my "label" as I want it to be but now I need to rotate it.
Problem is I can rotate the text but fill and stroke don't follow, they remain horizontal and just adapt so that it still fits the text. As a result I have a rotated font with a big rectangle box. Can I rotate fill+stroke with the text?
I want to rotated all of my photo into the up right position but i don't want to go to each photo and rotated every single photo manual Is there a way to rotated multipuly photo at the same time.
View 10 Replies View RelatedIve got a problem with a drawing from a client and the text is in multi-line format and is currently at the correct angle, however, when I go to edit the text is rotate's it's self round 270 deg....
View 9 Replies View RelatedGave a set of schematics to a client and they decided they wanted all the wire numbers rotating 90 degrees... In the interest of efficiency, any way I can rotate all the pieces of text at the same time whilst maintaining their individual position rather than selecting a base rotation point (as I have about 400 wire numbers to make my way through ).
Untitled.jpg
I want to make flyers for my band. I used to put text onto jpeg images using the Microsoft PAINT program but I want to get better at GIMP.
I really like some of the text(s) I make using the word art function in Micrsoft Excel 2010 but it seems I can't cut and paste them onto the image when using GIMP.
Is there a tutorial on putting text onto an image and making the text glow like a light saber?
I'm trying to copy editable text from a Word file into the text editor for GIMP. Before I upgraded to 2.8, this was possible, but now it seems not. I'm on 2.8.4 using OSX Mavericks on a Macbook Pro.
I'm a terrible speller and since GIMP doesn't support spell check, this was always my workaround.
I am trying to do text to path and I finally got it to work, but it is not bringing the text color that I assigned. Instead the text becomes a black outline of the real text. I uploaded this to the application I wanted to use it in, and the text was gone.
View 1 Replies View RelatedI'm trying to watermark a whole bunch of my photos with an Action, but I need to know how to align the text to the bottom right corner, like by percentage. Using pixel values won't do me any good since every image is a different size. Anybody know a way, or some alternative to get this effect?
View 1 Replies View RelatedWhen I copy some text in Illustrator, say red text, and my color well is set to pink, the newly pasted text is now pink?
Here is a short video of the problem, me copying the top text and without changing anything, pasting it. Note the color-well is set to black
[URL]