AutoCAD Civil 3D :: Degree Of Curvature For A Curve
Aug 9, 2006How to get the degree of curvature (DOC) for a curve in an alignment to be reported for Civil 3D 2007 like was reported in the 2006 version?
View 8 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: How To Label The Curve With Its Degree Of Curvature (Da)
Aug 10, 2013How to label the curve with its degree of curvature (Da)?
Degree of curvature (Da) can be calculated based on two different ways
Arc definition (considering 30 meters arc length):
Da=1719.74/R
Chord definition (considering 30 meters chord length):
Da=ASIN(50/Radius)*2
The issue here is that there is not built in option to label the curve with its degree of curvature.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD Civil 3D :: How To Set A Value And Label Degree Of Curvature
Aug 3, 2013How to set a value and label the “degree of curvature” for the horizontal alignment (HA)?
As the radius of the circular alignment (R) is calculated from the “degree of curvature” (attached) then I couldn’t figure out how to select a particular value for the “degree of curvature” (R=1718.8/Da) and then to label the horizontal alignment with it.
AutoCAD Civil 3D :: Degree Of Curvature Label
Aug 8, 2007I am trying to create an expression so that I can put the Dc into my alignment curve label. I am using (5729.58/Radius) for the expression and using Double for the format which comes out fine in decimal form as in a curve with a 200' R comes out to be 28.6479º, the problem is that I need it to come out as Angular DMS... when I switch the format to angle it comes back as 1641º24'14".
View 4 Replies View RelatedIllustrator :: Adjust Degree Of Curvature On Corners Of Rounded Rectangle?
Aug 22, 2013How to adjust the degree of curvature on the corners of rounded rectangles in Illy? This can be easily done in PS but I'm not seeing any options for this in Illustrator.
View 4 Replies View RelatedAutoCad :: What Is The Degree Of The Curve
Apr 6, 2013what kind of curve is this (e.g. Bezier, B-spline, or NURBS) and how many degrees are this curve?
View 5 Replies View RelatedAutoCAD Civil 3D :: Create Axis From Project Of Curvature?
Aug 19, 2013I have a problem with CIVIL 3D 2013, when I create an axis from a 3D project of curvature, the axis does not correctly following my project.
View 3 Replies View RelatedIllustrator :: Bend Paths To Make 90 Degree Curve Point
Mar 9, 2013Can I bend these paths making a 90 degrees curve pointing right so that the green line forms the inner curve with a smaller radius than the red line?
View 2 Replies View RelatedAutoCAD Civil 3D :: Error 607 / Inlet A9 Gutter Capture Curve Is Not A Valid Curve
Dec 31, 2013I have ran an analysis and SSA gave me Error 607 on the report. It says "Inlet A9 gutter capture curve is not a valid curve."
A couple things I did different from the video lectures...
I selected user define for the Tc to figure out Q. i computed those manually.
For the Inlets I have selected Maximum Capture Cutoff.
There are some inlets in this model I created that do not capture 100% of the flow so i created conveyance links to account for the bypass flow.Not sure why is not recognizing the Curve?
AutoCad 2D :: 0 Degree Is Vertical As 90 Degree
Jul 19, 2011I received a drawing from a client, which has all the features on a coordinate system, But the drawing is rotated for some reason. Even after rotating the drawing the coordinates are the same as it was prior to rotation. I believe there may be some variables that has been changed for this. If a line is drawn A@100<0 it is drawn vertical instead of horizontal and like wise @100<90 is drawn horizontal instead of vertical.
Attached is the drawing.
AutoCAD Civil 3D :: Arc Labels Not Spacing Degree Symbol Enough
Oct 1, 2013I am in C3D 2012 and using Romans.shx for my text. When labeling an Arc, the degree symbol comes out too close to the following text/number. Is there any way to adjust the spacing on curved text. On a straight line it looks fine.
View 4 Replies View RelatedAutoCAD Civil 3D :: Model An Alley With A 90 Degree Angle (turn)?
Dec 26, 2012What's the best way to model an alley with a 90 degree angle (turn). Do I treat it as an intersection with a zero radius? My typ section is 15 feet width with a 4% slope down to the center of pavement. "V" bottom. Not sure how to get it to model the outside corner and also eliminate the inside overlay.
View 8 Replies View RelatedAutoCAD Inventor :: Can't Find A Way To Open Curvature Settings Dialog Box
Jul 30, 2013I can't find the "Curvature settings" dialog box. Selecting and right-clicking the spline in scketch mode I don't find "Setup Curvature Display" command in the menu. Also, if I click on "Display Curvature" I can't see the curvature itself.
View 9 Replies View RelatedAutoCAD Civil 3D :: Settingout Curve Using VBA
Dec 2, 2012I would like to get a setting out data for curves using vba the table sample shown in attached file.
View 4 Replies View RelatedAutoCAD Civil 3D :: Vertical Curve (r) Value
Jun 21, 2013I need to add the "r" value to the vertical curve labels in the profile (|G2-G1| / L).
Is there a way to add this property to the text component editor? I see a lot of different components listed, but no "r" value.
AutoCAD Civil 3D :: Curve Tag Precision
Jul 18, 2013I am working in AutoCivil 3D 2014. I have created a curve table for a plat of an allotment with the precision for the curve length set to "Normal Rounding". My problem is that we have to show data for the individual lot frontage as well as the total length of the right-of-way curve length. So the individual lot frontages must add up to the total right-of-way length.
If they don't, I have to make an adjustment to one of the lengths. If I change the precision of the tag syle, there is no change in the table. I have attached a screen shot to show my results. The left picture shows a "span" style with the tag and curve length with the precision "truncated". On the right, is what is in the table. I would like to keep the table dynamic and not have to explode it. I think my problem lies in the table and the only way this can work is if I can override the one length in the table. But I have not been able to do that yet.
AutoCAD Civil 3D :: Curve From End Of Object?
Jan 7, 2010C3D2010, SP2
This command does not function correctly for me. Notice that it will ALWAYS draw the arc from the actual end of the object, not the end closest to the selection as it should?
Xara :: Pasting Rectangle Curvature
Apr 20, 2011Is there a reason that the curvature of a rounded rectangle is not inherited or a paste able attribute as, for example, fill color and line width are?
View 1 Replies View RelatedAutoCAD Civil 3D :: Drawing Two Centered Curve?
Aug 11, 2011How can i draw a two centered curve in civil 3d?
View 9 Replies View RelatedAutoCAD Civil 3D :: Curve And Line Tags
Feb 27, 2008How to start back to curve & line tag number 1 after generating tags?
During Parcel creation I told it to apply curve tags and it did what it said, created curve tags. Never again until I get comfortable with it. Looks great but want to have some order here. It's really random. I know it's not LDD but in LDD you could clear tags and start over. How to do this in 3D? From what I understand even if you do not display tags they are still created right? So where do I set the default starting number? Settings > Parcel > Commands > CreateSite?
AutoCAD Civil 3D :: Vertical Curve Labels
Apr 8, 2012I am having a lot of problems with my vertical curve labels. I created a style that shows the length of the vertical curve, the k-value, the end and start elevations, and the elevation and station of the PVI, as shown. My problems are the fact that when I want to flip a label, they all flip (shown in the second picture). I also have noticed that there is only one drag point. Is this a setting that I unknowingly edited, or is it possible to flip labels individually?
View 9 Replies View RelatedAutoCAD Civil 3D :: Superelevation Curve Name API 2014
Sep 16, 2013This is my aplicattion in Civil 3D 2014. URL....It´s a tool palette that checks the design criteria (for alignments,superelevations and profiles) according to Spanish rules.My program changes the name of each superelevation curve,for example:
---> With superelevation tool own of Civil 3D (Cuve.1,Curve.2,Curve.3)
---> With my program: (VisorNET Curva.1,VisorNET Cuva.2,.....)
If I calcule again Superelevations using Superelevation button (Calculate/Edit superelevation)of Civil 3D, Civil 3D doesn´t change the Superelevation Curve Names and appears again (VisorNET Curva.1,VisorNET Curva.2,...).Superelevation CurveName property doesn´t exist in settings:
URL....and there isn't a name template. I would like to have this property (read and write----get and set) of settings.Then, I could re-write the default Superelevation CurveName format. (name template)
AutoCAD Civil 3D :: How To Label A Curve By Points
Aug 21, 2012how to label a curve by points in C3D? I'm finding half of the new "fix" (line by points).
C3D - 2014, Sincpac Addon
AutoCAD Civil 3D :: Curve Label Tags
Apr 15, 2013My curve labels keep skipping. Why do they keep skipping from C6 to C9? I know how to use the renumber tags command. It just keeps skipping C7 and C8 for no apparent reason. There are no tags on frozen or off layers. When I add all possible objects to my curve table it does not change.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
AutoCAD Civil 3D :: Reverse Curve On Alignments
Oct 28, 2013I need to put a reverse curve on an alignment. I have tried using two free curve fillets,(between two entities, radius). the first curve was fine, but it would not allow the second curve. I also tried using a floating curve ( from entity radius through point) first, but it did not work.
View 2 Replies View RelatedAutoCAD Civil 3D :: Edit Parcel Curve
Aug 7, 2012I don't have much experience with parcels. We don't subdivide property. But I have to do some Acquisition maps and this is the first time I've had an opportunity to do them in Civil 3D.
I wont get in to the gory detail, but I created some parcels that were very slightly off for rotation. It turned out there were some distance problems too. I thought I would just rotate the parcel based on a couple of known corners and then snap to corners I had from a drawing in the correct system.
Mostly that worked. But now I have a curve that isn't tangent because the far end of one of the tangents was adjusted. Also, somehow, the radius is off. I'm only talking about a couple of thousands of a foot, but I'd like to make it right since it has to be edited anyway. I've tried the parcel editing tools from the ribbon and read some of the sections in help that I thought might apply. I haven't been able to adjust the curve.
So now after all the warm-up, my questions. Can I just erase that curve and use the parcel creation tools to add a new curve? Will that curve automatically be added to the correct parcel? Is there anyway to modify the existing curve to be tangent to the revised lines? IOW What's the best way to proceed?
AutoCAD Civil 3D :: Adding PVI With Vertical Curve?
Oct 14, 2010In this moment I am trying to add to my profile line a PVI -which I know how to do it- with the capability of modify the criteria for the vertical curve. In this moment every time that I add a PVI the tangents do not have a vertical curve and if I open the Panorama Profile Grade View Window it does not allow me to change either the length or radius so their values in these cells are empty.
How is possible then to edit -create- the vertical curve for a PVI that was not created in the first shoot?
AutoCAD Civil 3D :: Intersection Of 2 Corridors On Curve
Dec 26, 2013I have a mainline corridor which is intersecting with a side road corridor that is curving towards the mainline. After the PT of the curve, the two alignments are parallel and I am using an offset assembly here for the sections. What is the best way to handle the area where the two corridors are coming together. As far as I've been able to tell, I cannot use an offset assembly through the curve. There will be a ditch between the two that needs to be shown someway or another. I've attached a screen shot.
View 5 Replies View RelatedAutoCAD Civil 3D :: Create Subassembly With Curve In It
Mar 7, 2013I am trying to create a subassembly with a curve in it. See attached .pkt and .dwg files. Very small and simple.
When I attach the Subassembly to the Assembly, the event viewer shows "[Something wrong with current subassembly: The given key was not present in the dictionary.] (Source:Subassembly.Subassembly1)"
The link that represents the curve does not display; only the tesselated points display. In the Subassembly Composer the curve does display.
The file called curved.zip needs to be renamed to curved.pkt. This forum does not allow attachment of files with pkt extension.
Photoshop :: Change The Curvature Of A Fabric Snake
Feb 19, 2013I want to change the curvature of a fabric "snake." I twisted the 12-ft fabric, laid it out in a curvy configuration on a black backdrop in the studio, and took the shot. Now I have extracted the "snake" and pasted it onto a transparent layer.
I know how to do Transform Layer and Transform Selection, but both of those just give me a box, in which the Warp Mode is not what I want. I want to grab the tail of my snake and stretch it out, or make the curve tighter, or make one part of the snake overlay another. Can I do this in PS6?
AutoCAD Civil 3D :: Inserting Point Of Curve In Alignment?
May 11, 2012I am a fairly new user to C3D so this may seem simple.
Can I insert a point on an alignment at a particular Station?