AutoCAD Civil 3D :: Settingout Curve Using VBA

Dec 2, 2012

I would like to get a setting out data for curves using vba the table sample shown in attached file.

View 4 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Error 607 / Inlet A9 Gutter Capture Curve Is Not A Valid Curve

Dec 31, 2013

I have ran an analysis and SSA gave me Error 607  on the report. It says "Inlet A9 gutter capture curve is not a valid curve."

A couple things I did different from the video lectures...

I selected user define for the Tc to figure out Q. i computed those manually.

For the Inlets I have selected Maximum Capture Cutoff.

There are some inlets in this model I created that do not capture 100% of the flow so i created conveyance links to account for the bypass flow.Not sure why is not recognizing the Curve?

View 9 Replies View Related

AutoCAD Civil 3D :: Vertical Curve (r) Value

Jun 21, 2013

I need to add the "r" value to the vertical curve labels in the profile (|G2-G1| / L).

Is there a way to add this property to the text component editor?  I see a lot of different components listed, but no "r" value.

View 5 Replies View Related

AutoCAD Civil 3D :: Curve Tag Precision

Jul 18, 2013

I am working in AutoCivil 3D 2014. I have created a curve table for a plat of an allotment with the precision for the curve length set to "Normal Rounding". My problem is that we have to show data for the individual lot frontage as well as the total length of the right-of-way curve length. So the individual lot frontages must add up to the total right-of-way length.

If they don't, I have to make an adjustment to one of the lengths.  If I change the precision of the tag syle, there is no change in the table. I have attached a screen shot to show my results. The left picture shows a "span" style with the tag and curve length with the precision "truncated". On the right, is what is in the table. I would like to keep the table dynamic and not have to explode it. I think my problem lies in the table and the only way this can work is if I can override the one length in the table. But I have not been able to do that yet.

View 5 Replies View Related

AutoCAD Civil 3D :: Curve From End Of Object?

Jan 7, 2010

C3D2010, SP2

This command does not function correctly for me. Notice that it will ALWAYS draw the arc from the actual end of the object, not the end closest to the selection as it should?

View 8 Replies View Related

AutoCAD Civil 3D :: Drawing Two Centered Curve?

Aug 11, 2011

How can i draw a two centered curve in civil 3d?

View 9 Replies View Related

AutoCAD Civil 3D :: Degree Of Curvature For A Curve

Aug 9, 2006

How to get the degree of curvature (DOC) for a curve in an alignment to be reported for Civil 3D 2007 like was reported in the 2006 version?

View 8 Replies View Related

AutoCAD Civil 3D :: Curve And Line Tags

Feb 27, 2008

How to start back to curve & line tag number 1 after generating tags?

During Parcel creation I told it to apply curve tags and it did what it said, created curve tags. Never again until I get comfortable with it. Looks great but want to have some order here. It's really random. I know it's not LDD but in LDD you could clear tags and start over. How to do this in 3D? From what I understand even if you do not display tags they are still created right? So where do I set the default starting number? Settings > Parcel > Commands > CreateSite?

View 9 Replies View Related

AutoCAD Civil 3D :: Vertical Curve Labels

Apr 8, 2012

I am having a lot of problems with my vertical curve labels. I created a style that shows the length of the vertical curve, the k-value, the end and start elevations, and the elevation and station of the PVI, as shown. My problems are the fact that when I want to flip a label, they all flip (shown in the second picture). I also have noticed that there is only one drag point. Is this a setting that I unknowingly edited, or is it possible to flip labels individually?

View 9 Replies View Related

AutoCAD Civil 3D :: Superelevation Curve Name API 2014

Sep 16, 2013

This is my aplicattion in Civil 3D 2014. URL....It´s a tool palette that checks the design criteria (for alignments,superelevations and profiles) according to Spanish rules.My program changes the name of each superelevation curve,for example:

---> With superelevation tool own of Civil 3D (Cuve.1,Curve.2,Curve.3)

---> With my program: (VisorNET Curva.1,VisorNET Cuva.2,.....)

 If I calcule again Superelevations using Superelevation button (Calculate/Edit superelevation)of Civil 3D, Civil 3D doesn´t change the Superelevation Curve Names and appears again (VisorNET Curva.1,VisorNET Curva.2,...).Superelevation CurveName property doesn´t exist in settings:

URL....and there isn't a name template. I would like to have this property (read and write----get and set) of settings.Then, I could re-write  the default Superelevation CurveName format. (name template)

View 4 Replies View Related

AutoCAD Civil 3D :: How To Label A Curve By Points

Aug 21, 2012

how to label a curve by points in C3D?  I'm finding half of the new "fix" (line by points). 

C3D - 2014, Sincpac Addon

View 1 Replies View Related

AutoCAD Civil 3D :: Curve Label Tags

Apr 15, 2013

My curve labels keep skipping. Why do they keep skipping from C6 to C9? I know how to use the renumber tags command. It just keeps skipping C7 and C8 for no apparent reason. There are no tags on frozen or off layers. When I add all possible objects to my curve table it does not change.

Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3

View 2 Replies View Related

AutoCAD Civil 3D :: Reverse Curve On Alignments

Oct 28, 2013

I need to put a reverse curve on an alignment.  I have tried using two free curve fillets,(between two entities, radius). the first curve was fine, but it would not allow the second curve.  I also tried using a floating curve ( from entity radius through point) first, but it did not work.

View 2 Replies View Related

AutoCAD Civil 3D :: Edit Parcel Curve

Aug 7, 2012

I don't have much experience with parcels. We don't subdivide property. But I have to do some Acquisition maps and this is the first time I've had an opportunity to do them in Civil 3D.

I wont get in to the gory detail, but I created some parcels that were very slightly off for rotation. It turned out there were some distance problems too. I thought I would just rotate the parcel based on a couple of known corners and then snap to corners I had from a drawing in the correct system.

Mostly that worked. But now I have a curve that isn't tangent because the far end of one of the tangents was adjusted. Also, somehow, the radius is off. I'm only talking about a couple of thousands of a foot, but I'd like to make it right since it has to be edited anyway. I've tried the parcel editing tools from the ribbon and read some of the sections in help that I thought might apply. I haven't been able to adjust the curve.

So now after all the warm-up, my questions. Can I just erase that curve and use the parcel creation tools to add a new curve? Will that curve automatically be added to the correct parcel? Is there anyway to modify the existing curve to be tangent to the revised lines? IOW What's the best way to proceed?

View 1 Replies View Related

AutoCAD Civil 3D :: Adding PVI With Vertical Curve?

Oct 14, 2010

In this moment I am trying to add to my profile line a PVI -which I know how to do it- with the capability of modify the criteria for the vertical curve. In this moment every time that I add a PVI the tangents do not have a vertical curve and if I open the Panorama Profile Grade View Window it does not allow me to change either the length or radius so their values in these cells are empty.

How is possible then to edit -create- the vertical curve for a PVI that was not created in the first shoot?

View 5 Replies View Related

AutoCAD Civil 3D :: Intersection Of 2 Corridors On Curve

Dec 26, 2013

I have a mainline corridor which is intersecting with a side road corridor that is curving towards the mainline. After the PT of the curve, the two alignments are parallel and I am using an offset assembly here for the sections. What is the best way to handle the area where the two corridors are coming together. As far as I've been able to tell, I cannot use an offset assembly through the curve. There will be a ditch between the two that needs to be shown someway or another. I've attached a screen shot.

View 5 Replies View Related

AutoCAD Civil 3D :: Create Subassembly With Curve In It

Mar 7, 2013

I am trying to create a subassembly with a curve in it. See attached .pkt and .dwg files. Very small and simple.

When I attach the Subassembly to the Assembly, the event viewer shows "[Something wrong with current subassembly: The given key was not present in the dictionary.]  (Source:Subassembly.Subassembly1)"

The link that represents the curve does not display; only the tesselated points display. In the Subassembly Composer the curve does display.

The file called curved.zip needs to be renamed to curved.pkt. This forum does not allow attachment of files with pkt extension.

View 2 Replies View Related

AutoCAD Civil 3D :: How To Label The Curve With Its Degree Of Curvature (Da)

Aug 10, 2013

How to label the curve with its degree of curvature (Da)?

Degree of curvature (Da) can be calculated based on two different ways

Arc definition (considering 30 meters arc length):

Da=1719.74/R

Chord definition (considering 30 meters chord length):

Da=ASIN(50/Radius)*2

 The issue here is that there is not built in option to label the curve with its degree of curvature.

Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.

View 9 Replies View Related

AutoCAD Civil 3D :: Inserting Point Of Curve In Alignment?

May 11, 2012

I am a fairly new user to C3D so this may seem simple.

Can I insert a point on an alignment at a particular Station?

View 2 Replies View Related

AutoCAD Civil 3D :: Station Labels On Vertical Curve

Oct 23, 2012

I have two different label styles set up under Profile > Label Styles > Major Station.

I would like to have one of these labels applied to tangents in my profile and a the other one to curves.

View 9 Replies View Related

AutoCAD Civil 3D :: PVI Remains After Creating Vertical Curve

May 16, 2013

I have a profile view of a street surface which transitions from a 2.75% grade to -0.52%. I would like to add a vertical curve so I can add a label at the high point of the street. However when I create my vertical curve, the original PVI is still there and the surface uses the PVI's elevation rather than the vertical curve's.

How can I get the PVI to either go away or have the surface read the vertical curve below the PVI?

View 5 Replies View Related

AutoCAD Civil 3D :: Custom Automatic Curve Widening?

Oct 22, 2012

there has used a non-AASHTO curve widening formula to calculate automatic curve widening for an alignment?  I'm trying to use our Agency curve widening formula which is a function of curve radius and  central angle.  

I'm not sure if it is even possible to use the central angle of the curve for calculating widening, or how one would go about using a non-AASHTO CW formula.

Attached is the curve widening formula that needs to be used.  L will be a constant here.

View 3 Replies View Related

AutoCAD Civil 3D :: Adding A Curve To Existing Alignment

Jan 4, 2009

I have an existing alignment issued to me which has been created using all straight lines even where there should be curves. I am trying to insert curves in these areas. Using free curves (2 entities and a through point) I create a curve then somethings happen I can't work out -

1. The curve is created but the original straight linework stays. I would have thought the original linework would automatically delete. See attached pdf between points 60 and 62 the curve and straights can be seen.
2. Then all stations after the curve are changed to the question mark symbol. If i click on the alignment all the grips are still there for the full length of the alignment, indicating the alignment is still in one piece.
3. If I try to create another curve further along the alignment it won't allow it. Stating on the command line "Selected entity must be part of the main entity."

I'm using C3D 2009.

View 9 Replies View Related

AutoCAD Civil 3D :: Curve Labels Skipping Number?

Feb 22, 2010

I am adding curve label numbers to a parking lot to create a table with the curve delta/radius. My problem is that #9 is being skipped. Its going right from 8 to 10.

View 3 Replies View Related

AutoCAD Civil 3D :: Vertical Circular Curve On Profile

Nov 12, 2012

Seems like a bug on Autocad Civil 3D 2013. I followed all the tutorials to design a circular vertical curve on a profile and it just dont work. I put circular on settings, click on circular curve by PVI button, the software even ask the radius and it end up designing a parabolic curve.

View 2 Replies View Related

AutoCAD Civil 3D :: Sloping Stage / Storage Curve

May 8, 2012

I see Civil3D has a Stage-Storage curve for determining volumes for incremental elevation increases for a bounded area (e.g. pond). This works well for water where the top surface is horizontal, however, i need to consider a sloping surface to duplicate a slurry discharged into a lagoon. This has a slope of 1% from the point of discharge and how i can determine the volume/height relationship considering this slope without having to do multiple grading and surface creation. The discharge point gradually moves upstream as the filling occurs to prevent the pipe becoming blocked by the slurry.

I thought about creating a 1% surface and incrementally raising it making it a comparison surface, but the 1% slope is not in a planar form, it is 1% from the discharge point in a radial direction.

View 3 Replies View Related

AutoCAD Civil 3D :: Cannot Select Curve Number Dialog Box?

Oct 26, 2012

Why I get this error when trying to enter a curve number?

View 1 Replies View Related

AutoCAD Civil 3D :: Vertical Curve For Pipe Network?

Sep 1, 2011

I want to draw a water pipe network and i wanted to be 1.6 meter under the ground level. How to mange this my pipe network is PE material. I try to copy the profile and offset to -1,6 but i want to use the option of create pipe network and produce it in the profile view but how can i make the network follow the ground level profile ????

I need to add vertical curve to the network or something similar? Can i divide the pipes in the profile view by adding the structures direct to profile view.

View 9 Replies View Related

AutoCAD Civil 3D :: Line And Curve Labels And Tables

Jun 22, 2012

I am doing a project and I have a lot of feature lines.  I will need to be able to lable these feature lines with tags and then create tables for those.  My question is, is there an easy format that I can do that will lable these lines in an order I set it up?  Right now it just lables all over the place. The lines are counting the curves too.  For example: L1 L2 L3 C1 L5 L6 C2 L8.  I can make it work, would just think there is a better way.  BTW I am using Civil 3D 2011.

View 1 Replies View Related

AutoCAD Civil 3D :: Custom Horizontal Curve Table

Sep 29, 2012

Can we produce a Horizontal curve table like the attachment Table 1 and i have another queries could Civil 3d Produce a table like the attachment Table 2 i know i can get this table by lisp or macros.

View 2 Replies View Related

AutoCAD Civil 3D :: Custom Automatic Curve Widening

Oct 16, 2012

Looking for a non-AASHTO curve widening formula to calculate automatic curve widening for an alignment?  I'm trying to use our Agency curve widening formula which is a function of curve radius and  central angle.  

I'm not sure if it is even possible to use the central angle of the curve for calculating widening, or how one would go about using a non-AASHTO CW formula.

Attached is the curve widening formula that needs to be used.  L will be a constant here.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved