AutoCAD Civil 3D :: Curve Tag Precision
Jul 18, 2013
I am working in AutoCivil 3D 2014. I have created a curve table for a plat of an allotment with the precision for the curve length set to "Normal Rounding". My problem is that we have to show data for the individual lot frontage as well as the total length of the right-of-way curve length. So the individual lot frontages must add up to the total right-of-way length.
If they don't, I have to make an adjustment to one of the lengths. If I change the precision of the tag syle, there is no change in the table. I have attached a screen shot to show my results. The left picture shows a "span" style with the tag and curve length with the precision "truncated". On the right, is what is in the table. I would like to keep the table dynamic and not have to explode it. I think my problem lies in the table and the only way this can work is if I can override the one length in the table. But I have not been able to do that yet.
View 5 Replies
ADVERTISEMENT
Dec 31, 2013
I have ran an analysis and SSA gave me Error 607 on the report. It says "Inlet A9 gutter capture curve is not a valid curve."
A couple things I did different from the video lectures...
I selected user define for the Tc to figure out Q. i computed those manually.
For the Inlets I have selected Maximum Capture Cutoff.
There are some inlets in this model I created that do not capture 100% of the flow so i created conveyance links to account for the bypass flow.Not sure why is not recognizing the Curve?
View 9 Replies
View Related
Oct 26, 2011
Unable to change line label precision (both bearing and distance).
The goal is N10d10'10"E, 100.00'
Civil 3D 2012 is giving N10d10'10.00", 100.000'
I am using a template with the distance precision set to 2.
The drawing setting->Ambient settings distance precision are set to 2.
The feature settings distance precison is set to 2.
View 9 Replies
View Related
Aug 17, 2012
How can I make better the second labeling precision in Civil 3D? It's only has four digits precision for the seconds. I did change the ambient settings (Lat Long precision to 8) but haven't got the result.
View 4 Replies
View Related
Sep 27, 2013
Is it possible to change the precision in the properties box for the maximum and minimum grades and elevations of a feature line? I like to select my feature lines and see the minimum and maximum grades and elevations in the properties. (I keep the properties window docked and open at all times.)
View 2 Replies
View Related
Jun 20, 2008
In the profile band the elevations are set to 3 decimal places. I just want to get it to 2 places.
View 3 Replies
View Related
Jul 31, 2013
I have a Points Table in metric. I was to display the coordinate data to 3 decimals. It currently is showing only 2 decimals. I looked under table style and table properties but cannot seem to find this setting.
View 2 Replies
View Related
Mar 11, 2013
how do I change the precision for the elevation?
View 3 Replies
View Related
Jul 23, 2010
My parcel inverse reports from the Toolbox Report Manager are still coming in with the bearings having decimal seconds to 3 places (N 0-00-00.000 E). I have already changed the variable for angle precision to zero in the "General_Formating_JScript" xsl file but it's still not coming out correctly. Is there any other file that holds an additional angle or bearing precision setting?
View 4 Replies
View Related
Feb 21, 2012
Where is the settings for changing the precision on an annotated line length? I'm getting three places right now, and I don't need any places other than the whole number on a series of lines.
View 5 Replies
View Related
Oct 25, 2010
i am trying to change my contour label precision from 700 to 700.50, i am working in a very flat area and i placed .25' and 1' contours on my site plan but can only get even foot labels to show. where do i change the precision, i tried in units, no luck.
View 9 Replies
View Related
Apr 7, 2012
The AutoCAD C3D fails to apply the precision for all elevations in one go!I wanted to let the precision to be zero for all the contour lines in ONE go but sound not to work!Only the picked elevation responds to the selected precisions, the others are not affected!
View 3 Replies
View Related
Jul 22, 2013
[URL]
with this I changed placement of coordinates from being outside of a viewport to inside.
However, I still do like this unnecessary zeros in the end of numbers.
Do you know how to get rid of them in a code?
View 2 Replies
View Related
May 10, 2012
How do you change the precision for the bearing and distance labels in 2012
View 2 Replies
View Related
Oct 10, 2012
I'm trying to determine if it's possible to take a 09 LDD Companion drawing in which the elevations for many points have been moved AND/OR rotated (to align with roadway), and not only convert these to C3D, but also have them transferred along with the move/rotate information. We're talking about a mile long stretch of roadway and the project is 6 years old (i.e. no C3D when it was originally done).
The problem is that there are a ton of ground shots that need only be shown to 0.1 precision but are shown to 0.01 precision. LDD was not able to assign an elevation precision to groups of points, only all cogo points together, which meant we had to explode certain groups of "soft shot" points once they had been inserted at the desired precision.
If there's no way to do what I'm asking, it's no big deal for this case since the higher precision can be easily rounded to the lower by the viewer (better than the other way around). But as I am the only one on C3D and have been for the past 2 and a half years, we will likely face this monster again several times over with other drafters' projects and I'd like to have a best practice in place if we need to go the other way (extracting 0.01 precision from 0.1 precision).
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
View 9 Replies
View Related
Mar 8, 2012
How and where can I adjust the station precision of the view frame start and end station. I am choosing snap to nearest foot station but I am getting 1+00.00. I would like 1+00 in the label. I am setting to start end to the layout name and mapping that to the current drawing field in SSM and do not have precision control there either.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
View 7 Replies
View Related
Apr 24, 2013
I'm trying to edit my label style so that the bearing has no decimal places and the distance has two. I thought it would be similar to editing the contour label precision but it doesn't seem to be that way.
View 3 Replies
View Related
Dec 2, 2012
I would like to get a setting out data for curves using vba the table sample shown in attached file.
View 4 Replies
View Related
Jun 21, 2013
I need to add the "r" value to the vertical curve labels in the profile (|G2-G1| / L).
Is there a way to add this property to the text component editor? I see a lot of different components listed, but no "r" value.
View 5 Replies
View Related
Jan 7, 2010
C3D2010, SP2
This command does not function correctly for me. Notice that it will ALWAYS draw the arc from the actual end of the object, not the end closest to the selection as it should?
View 8 Replies
View Related
Aug 11, 2011
How can i draw a two centered curve in civil 3d?
View 9 Replies
View Related
Aug 9, 2006
How to get the degree of curvature (DOC) for a curve in an alignment to be reported for Civil 3D 2007 like was reported in the 2006 version?
View 8 Replies
View Related
Feb 27, 2008
How to start back to curve & line tag number 1 after generating tags?
During Parcel creation I told it to apply curve tags and it did what it said, created curve tags. Never again until I get comfortable with it. Looks great but want to have some order here. It's really random. I know it's not LDD but in LDD you could clear tags and start over. How to do this in 3D? From what I understand even if you do not display tags they are still created right? So where do I set the default starting number? Settings > Parcel > Commands > CreateSite?
View 9 Replies
View Related
Apr 8, 2012
I am having a lot of problems with my vertical curve labels. I created a style that shows the length of the vertical curve, the k-value, the end and start elevations, and the elevation and station of the PVI, as shown. My problems are the fact that when I want to flip a label, they all flip (shown in the second picture). I also have noticed that there is only one drag point. Is this a setting that I unknowingly edited, or is it possible to flip labels individually?
View 9 Replies
View Related
Sep 16, 2013
This is my aplicattion in Civil 3D 2014. URL....It´s a tool palette that checks the design criteria (for alignments,superelevations and profiles) according to Spanish rules.My program changes the name of each superelevation curve,for example:
---> With superelevation tool own of Civil 3D (Cuve.1,Curve.2,Curve.3)
---> With my program: (VisorNET Curva.1,VisorNET Cuva.2,.....)
If I calcule again Superelevations using Superelevation button (Calculate/Edit superelevation)of Civil 3D, Civil 3D doesn´t change the Superelevation Curve Names and appears again (VisorNET Curva.1,VisorNET Curva.2,...).Superelevation CurveName property doesn´t exist in settings:
URL....and there isn't a name template. I would like to have this property (read and write----get and set) of settings.Then, I could re-write the default Superelevation CurveName format. (name template)
View 4 Replies
View Related
Aug 21, 2012
how to label a curve by points in C3D? I'm finding half of the new "fix" (line by points).
C3D - 2014, Sincpac Addon
View 1 Replies
View Related
Apr 15, 2013
My curve labels keep skipping. Why do they keep skipping from C6 to C9? I know how to use the renumber tags command. It just keeps skipping C7 and C8 for no apparent reason. There are no tags on frozen or off layers. When I add all possible objects to my curve table it does not change.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
View 2 Replies
View Related
Oct 28, 2013
I need to put a reverse curve on an alignment. I have tried using two free curve fillets,(between two entities, radius). the first curve was fine, but it would not allow the second curve. I also tried using a floating curve ( from entity radius through point) first, but it did not work.
View 2 Replies
View Related
Aug 7, 2012
I don't have much experience with parcels. We don't subdivide property. But I have to do some Acquisition maps and this is the first time I've had an opportunity to do them in Civil 3D.
I wont get in to the gory detail, but I created some parcels that were very slightly off for rotation. It turned out there were some distance problems too. I thought I would just rotate the parcel based on a couple of known corners and then snap to corners I had from a drawing in the correct system.
Mostly that worked. But now I have a curve that isn't tangent because the far end of one of the tangents was adjusted. Also, somehow, the radius is off. I'm only talking about a couple of thousands of a foot, but I'd like to make it right since it has to be edited anyway. I've tried the parcel editing tools from the ribbon and read some of the sections in help that I thought might apply. I haven't been able to adjust the curve.
So now after all the warm-up, my questions. Can I just erase that curve and use the parcel creation tools to add a new curve? Will that curve automatically be added to the correct parcel? Is there anyway to modify the existing curve to be tangent to the revised lines? IOW What's the best way to proceed?
View 1 Replies
View Related
Oct 14, 2010
In this moment I am trying to add to my profile line a PVI -which I know how to do it- with the capability of modify the criteria for the vertical curve. In this moment every time that I add a PVI the tangents do not have a vertical curve and if I open the Panorama Profile Grade View Window it does not allow me to change either the length or radius so their values in these cells are empty.
How is possible then to edit -create- the vertical curve for a PVI that was not created in the first shoot?
View 5 Replies
View Related
Dec 26, 2013
I have a mainline corridor which is intersecting with a side road corridor that is curving towards the mainline. After the PT of the curve, the two alignments are parallel and I am using an offset assembly here for the sections. What is the best way to handle the area where the two corridors are coming together. As far as I've been able to tell, I cannot use an offset assembly through the curve. There will be a ditch between the two that needs to be shown someway or another. I've attached a screen shot.
View 5 Replies
View Related
