AutoCAD Civil 3D :: How To Change Profile Elevations Precision
Mar 11, 2013how do I change the precision for the elevation?
View 3 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Change Profile Elevations Of Intersecting Roads
Dec 18, 2013Is there a way for the program to automatically change profile elevations of intersecting roads.
Say for example i have two intersecting roads ROAD A and ROAD B.
On my ROAD A profile at station 0+300 i have a proposed road elevation of 9.5
On my ROAD B profile at station 0+000 (intersecting point) I have the same proposed road elevation of 9.5.
Now i change my ROAD A profile at station 0+300 to 10.3
Is there anyway to allow the program to automatically change my ROAD B profile elevations to 10.3
IF NOT--
and I have to use the Annotate > Add Labels > Profile View > .......................... labels,
Is there a way for those labels to link across the profiles such that , On my ROAD A profile at station 0+300 i put the label at the elevation of 9.5
On my ROAD B profile at station 0+000 (intersecting point) I have the same label at the elevation of 9.5
Now i change my ROAD A profile at station 0+300 to elevation of 10.3 then is there a way for it to automatically raise the ROAD B elevation label
So that I would know, without having to manually check through, that there is a discrepancy between those intersecting roads. So the real list of my query is whether I can link my alignments, profiles or annotation labels.
AutoCAD Civil 3D :: Fails To Apply Precision For All Elevations In One Go
Apr 7, 2012The AutoCAD C3D fails to apply the precision for all elevations in one go!I wanted to let the precision to be zero for all the contour lines in ONE go but sound not to work!Only the picked elevation responds to the selected precisions, the others are not affected!
View 3 Replies View RelatedAutoCAD Civil 3D :: Creating Profile Bandsets With More Than 2 Profile / Surface Elevations Shown
Mar 14, 2013Im creating a Profile Bandset and would like to have multiple surface/profile elevations shown, ie: EG, FG, Back of Curb and Back of walk. While creating this bandset I see that the text component editor properties only has code for profile 1 elevation and profile 2 elevation in the properties area, which the code for this looks like below.
<[Profile1 Elevation(Uft|P2|RN|Sn|OF|AP)]>
<[Profile2 Elevation(Uft|P3|RN|AP|Sn|OF)]>
Ive tried to write my own code using the profile 2 as an example but it doesnt seem to work as a 3rd surface/profile and only seems to mimic the profile 2 elevation when placed in the band
My questions are as follows
1) does Civil 3d only allow 2 surface elevations in any band set? if it does allow more profiles/surface elevations what am i missing to create it?
2) if Civil 3d does alow for multiple surfaces to be shown in the band set how do i get the text component editor to supply the extra profile elevation codes? or would i need to create from scratch
3) if i need to write the code from scratch does any listing of the codes and meanings of each code ie what does RN, Uft, Sn and so forth do and mean .
AutoCAD Civil 3D :: Profile Band Elevation Precision?
Jun 20, 2008In the profile band the elevations are set to 3 decimal places. I just want to get it to 2 places.
View 3 Replies View RelatedAutoCAD Civil 3D :: Hiding Profile Elevations In The Band
Mar 21, 2012Attached is a drawing with my profile along with elevations in the band.
UPPER BAND - has proposed road elevations on the left and existing road elevations on the right.
LOWER BAND - has pipe elevations on the left and the SAME existing road elevations on the right.
I've been messing around in the profile view properties but cannot hide the duplicate elevations in one of the bands.
AutoCAD Civil 3D :: Profile Bands - EG Elevations Blank
Jun 28, 2011Civil 3D 2011:
I have 7 roads in my drawing and all of the profile data bands except one are correct. We first started with an overall profile with the EG created from a surface and the FG created by drawing in profile, then created multiple profile views. The only thing wrong with the one road profile is the data band is not showing the EG elevations. The strange thing is under Profile View Properties - Bands Tab, Profile 1 is set to EG and Profile 2 is set to FG, so it recognizes it is there and is also shown in the profile, however no elevations. I have tried recreating the multi profile views. Attached is a screen shot to give you a visual.
AutoCAD Civil 3D :: Existing Profile To Show FG Elevations
Feb 15, 2013I'm currently working on a profile and I just don't understand why my profiles barely show any stations. It doesn't even show the very first station. I remember checking on a box that mentioned showing the 1st station and still nothing. I've gone into the edit band style and turned on the labels at minor stations but it just turned on the FG/EG elevations.
I've added a picture showing what i'm talking about. It only shows stations 31+00 and 32+00. Not 30+00 or the 50' increments. Also, while I'm on the subject. How do I get something proposed into this existing profile to show FG Elevations. Example if I just wanted to strike a straight line from 30+00 to the end where the elevation is a 91' & 86'.
HP Compaq 8100 Elite
Win 7 Pro SP1 - 64Bit
8GB RAM
i7 860 @ 2.80 GHZ
AutoCad Civil 3d 2012 SP1
AutoCAD Civil 3D :: Adding Profile Elevations To Alignment Labels
May 10, 2010Is there a way in C3D to add elevation information from a profile to an alignment label? What I'm trying to do is add labels to an alignment in a plan view with elevation information from a profile design associated with that alignment at a particular station. For example, the note would read:
ALIGNMENT B
STA: 12+83.67
ELEV: 435.87
I can't figure out how to add any elevation data to the alignment note. I really don't want to have to create a section and a corridor surface, but that's the only way I can think of right now... and I'm not sure that would actually let me add a station and elevation in the same note in a plan view.
AutoCAD Civil 3D :: Profile View / Displaying Two Elevations Per Chainage
Apr 11, 2013I've drawn a profile and would like to show the elevations of each surface selected in different bands. I've set up the bands easily enough though when they display on the section I've got two levels either side of the chainage line one with 0.01 precision and one with 0.001 precision - I only want to display one. I've tried fiddling with the Profile View Properties but don't seem to be getting very far..
View 3 Replies View RelatedAutoCAD Civil 3D :: Change Precision In Properties Box
Sep 27, 2013Is it possible to change the precision in the properties box for the maximum and minimum grades and elevations of a feature line? I like to select my feature lines and see the minimum and maximum grades and elevations in the properties. (I keep the properties window docked and open at all times.)
View 2 Replies View RelatedAutoCAD Civil 3D :: How To Edit Feature Line Elevations In Profile View
Sep 26, 2013I have a finished grade surface and I have a feature line that is my waterline. I created an alignment and then recreated my feature line so they would be linked. I can then create a profile using my alignment and that shows my surface at that alignment. I can even add the waterline by using project objects to profile view.
I need to be able to edit the feature line elevations in the profile view by creating and erasing PVIs so this will tie back to my geometry.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
AutoCAD Civil 3D :: How To Change Contour Labels Precision
Oct 25, 2010i am trying to change my contour label precision from 700 to 700.50, i am working in a very flat area and i placed .25' and 1' contours on my site plan but can only get even foot labels to show. where do i change the precision, i tried in units, no luck.
View 9 Replies View RelatedAutoCAD Civil 3D :: Labeling Centerline Existing Ground & Profile Grade Elevations?
Mar 28, 2012I am trying to label existing ground & profile grade on my cross-sections the way old Land 4 used to do it. I've muddled through section view property style settings, band settings, group properties w/no luck. It can't possible be this difficult. What am I missing?
View 5 Replies View RelatedAutoCAD Civil 3D :: How To Change The Precision For The Bearing And Distance Labels
May 10, 2012How do you change the precision for the bearing and distance labels in 2012
View 2 Replies View RelatedAutoCAD Civil 3D :: Change All Point Elevations
Sep 2, 2013Sounds simple enough, but how would I subtract 2.300 from every point elevation?
View 4 Replies View RelatedAutoCAD Civil 3D :: Elevations Change During Insertion Into Drawing
Jun 21, 2013I have imported a survey file. When I insert the points into the drawing, the elevation changes to something that isn't even recognizable. When I view the point in the survey tab, the elevation is correct, when I view the point in the prospector tab it is different.
View 4 Replies View RelatedAutoCAD Civil 3D :: Rotating Points Elevations Change Tool?
Feb 29, 2012By rotating points elevations change too!? I wonder what I am doing wrong!?
Just starting using Civil 3D 2012 version.
AutoCAD Inventor :: VBA - Unable To Change Tolerance Precision?
Jul 28, 2010All the values I put in to set my tolerance are being rounded to three decimal places even though the value is four place and I am setting the dimension precision to four place.
For Example: I have a hole of diameter 2.0466. It is to have a tolerance of +.0005/-.0000. When tolerance.setToDeviation is called, the .0005 is strangely forced to .001 and is set as this in the part file. The precision value had already been set to 4 at this point.
I am using the following code in Inventor 2010:
'Create hole feature
Call oCompDef.Features.HoleFeatures.AddDrilledByThroughAllExtent(oLinearPlacementDef, dDiameter, kExtentDirection)
'Get hole feature just created
Dim oHole As HoleFeature
Set oHole = oCompDef.Features.HoleFeatures.Item(oCompDef.Features.HoleFeatures.Count) ' need most recent index
[code]...
AutoCAD Inventor :: Change Precision Of Driven Dimensions
Mar 14, 2012How can I change the precision of Driven Dimensions. I have a Driven Dimesion in a sketch that I want to use in another dimension later. Let's say that d59 is a Driven Dimension.I want dimension d80 = d59*2. When I measure it using eight decimal places, I can see that it is rounding d59 to 3 decimal places, but I don't want it to do that because then d80 is off.
View 7 Replies View RelatedAutoCAD Civil 3D :: Can Change The Order Of Profile Hatch
Jul 20, 2012Is there a way to change the order of the Profile Hatch after it's been done as later solid hatches are displaying over the earlier ones?
The only way I've been able to do this is to delete all and then create in the correct order which is a bit of a PITA.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
AutoCAD Civil 3D :: How To Change Text Of One Profile View
Feb 4, 2013So I am trying to edit certain text features dealing with stationing in one profile view (for example I don't want any stationing on the top of the profile view). How do I do this so it will just affect the noted profile view and not delete the stationing on all of my profile views in this drawing.
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Change Precision For Some Calculation?
Mar 25, 2013I prepared a lisp code that needs high precision calculation:
(defun Time2Frac ( h m s hsec)(+ (/ h 24.0) (/ m 1440.0) (/ s 86400.0) (/ hsec 8640000.0)))
test:
(Time2Frac 23 59 59 99)
it returns 1.0 but the real result is 0.9999998842592
so, how can I change the precision of AutoCAD for some calculation?
AutoCAD Civil 3D :: Change Profile Major Station Interval
May 28, 2013I've attached two screenshots of my issue. I simply need to change my major station from 1000' interval to 500' interval. As you can see from the screen caps, I can manage to get the band details on the stations I want, through a workaround, but the vertical gridlines get all messed up.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
AutoCAD Civil 3D :: Change Alignment Reference In Profile View?
Sep 18, 2012I have a profile that references an alignment, I want to change the alignment that the profile view references, can this be done?
View 1 Replies View RelatedAutoCAD 2013 :: Select Dimensions And Change Precision To 2 Decimal Points?
Sep 30, 2013I wanted to select dimensions and change the precision to 2 decimal points.
For any dimensions I positioned on the object (like the width of the block centered in the block)...rather than above, below or off to the side. I am unable to select that dimension. Every time my cursor goes towards the dimension to select it.....the block itself is automatically selected. Any dimension outside the boundary of the object is fully selectable to edit.
AutoCAD Civil 3D :: Change Profile Type That Has File Assigned To It To Layout?
Jul 15, 2013Is there any way to change a Profile Type that has "File" assigned to it to"Layout"?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
AutoCAD Civil 3D :: Profile Alignments - Change Setting From Slope To Gradient
May 13, 2013Is there a way to change the settings on the Profile Layout Parameters to display as Gradients instead of the default Slopes?
E.g. I'd like to type in 1 in 150 instead of 0.6666666% etc
AutoCAD Civil 3D :: 2013 / How To Change Static To Dynamic In Profile Views
May 3, 2012in civil 3d 2013 i have a existing surface, alignment, and profile that is data linked into another drawing when i create a profile view from the profile data link when i get to the profile display options under update mode it shows as beening static, i don't want it to be static i want it to be dynamic. is there a way or setting that will let me change that to static? we show the existing grade as hidden but with the static option set the grade shows up with long and short.
View 5 Replies View RelatedAutoCAD Civil 3D :: Curve Tag Precision
Jul 18, 2013I am working in AutoCivil 3D 2014. I have created a curve table for a plat of an allotment with the precision for the curve length set to "Normal Rounding". My problem is that we have to show data for the individual lot frontage as well as the total length of the right-of-way curve length. So the individual lot frontages must add up to the total right-of-way length.
If they don't, I have to make an adjustment to one of the lengths. If I change the precision of the tag syle, there is no change in the table. I have attached a screen shot to show my results. The left picture shows a "span" style with the tag and curve length with the precision "truncated". On the right, is what is in the table. I would like to keep the table dynamic and not have to explode it. I think my problem lies in the table and the only way this can work is if I can override the one length in the table. But I have not been able to do that yet.
AutoCAD Civil 3D :: How To Change Color In Profile Data Band Label Group
Jul 13, 2012I want to change my elevations color to green and the other one to yelow. I can't not find this option. I using 3D 2011.
View 1 Replies View Related