AutoCAD 2013 :: Create 3D Cylinder With 45 Degree Angle Cut On Other End
Jun 18, 2012I am have a problem. How do you create a cylinder with a flat end on one side and on the other side have it at a 45 degree angle.
View 4 RepliesI am have a problem. How do you create a cylinder with a flat end on one side and on the other side have it at a 45 degree angle.
View 4 Replies I am trying to make a toilet paper roller; standard white ones with the spring inside [URL] .
I need to cut the bottom of the cylinder at a 45 degree angle from the center to wall so if the roller was standing, it would be at an angle of 45 degrees to.
I have attatched what I have so far.
I am having trouble with the slicing. I am not sure how to chop the whole cylnder at an angle.
Also how do I remove the yellow lines and the white line with the measurement .1280 (you'll understand when you open the file)
I am trying to make a cut on a 12" D cylinder at a 45 degree angle and i am having a little trouble. I have projected the shape onto the curve and sketched it. Now to finish the cut do i need to scuplt that path or how do I go about doing this.
I provided a screen print to try and and explain it a little batter. The half moon looking sketch is what i am tring to cut out of the cylinder. i have already projected the surface lines on the cylinder, but get stuck at this point
Is there a shortcut to draw a 45 or 90 degree angle from a drawn line on an angle using the pen tool? ie. Rather than just from the x and y axis.
I trace a lot of maps and site plans.
I'm trying to sweep it around shape like this But it won't, it says "The selected path curve is not valid." - so what do I do? (it is polyline) Is there maybe some other way to get this 3D shape fast?
View 8 Replies View Relatedeasier way to program 45 degree corners on the top flange of two mating parts. We can't bend the ends on so they have to be welded. I am using inventor 2014 professional. Almost all my programming is done in sheet metal.
View 2 Replies View RelatedI'm trying to draw the following bench in Autocad but I'm getting bogged down trying to figure out how to create the following tube with an angle on it and how to achieve different shapes at the top of tube.
View 9 Replies View Relateduntitled.jpg
Is there a way to convert those lines into plines, so i could extrude and cut.
What's the best way to model an alley with a 90 degree angle (turn). Do I treat it as an intersection with a zero radius? My typ section is 15 feet width with a 4% slope down to the center of pavement. "V" bottom. Not sure how to get it to model the outside corner and also eliminate the inside overlay.
View 8 Replies View RelatedI'm trying to create a dynamic block for plywood. I have the stretch parameter working so that I can stretch the plywood to the needed length. I also have set a rotation parameter based on the various roof pitches that we use. The problem is I would like to be able to rotate the sheathing to a 45 degree angle and then stretch along the 45 degree angle. Once I rotate the sheathing the stretch does not follow the rotation angle. I have attached the file.
View 9 Replies View RelatedHow to get the correct notation for the angle in degree/minute/second?
I wanted to show the angle as 29˚12’13’’ but not as 29d12’13’’
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
how do one wants to do a polar increment angle to make a degree in a autocad drawing. I want to design a truss but at the angle of the truss , how to make an angle between the top chord and lower chord. which icon i should click on ?
View 3 Replies View RelatedI'm trying to figure our how to taper a circular object 1-1/2" high on a 45 degree angle from the top down (that is the lower part goes in like a pie pan). Taper doesn't seem to work.
View 2 Replies View RelatedI'm experimenting with 3d printing and wish to create a tube system based on this vase. Im completely new with 3ds max. What's the easiest way to simply bend the entire model 90 degrees? URL...
View 2 Replies View Relatedwrapping a continuous line of text around a 90 degree bend. The third attached image is exactly what I need it to do. That is something I just put together as an example though.
I have some repeating information that I want to wrap around the border of an image. Being that it is repeating information, the text can also look like the first and second image uploaded, where part of the word is cut off. I would prefer this to be minimal though.
So far all I have found in my time searching on this leaves the words distorted.
No matter the complications, this also needs to be scripted. It is not feasible to do this manually as the repeating information is dynamic.
EDIT: The upload for the thumbnails is off.
Added Details.Attached File(s) textwrap2.jpg (8.9K)
Number of downloads: 19 textwrap2.jpg (8.9K)
Number of downloads: 17 textwrap.jpg (8.38K)
Number of downloads: 7
I'd like to orient a picture of a book so that it's on a 45 degree angle and then "cut out" the area around the "book" to that when you view the picture is looks like a book on a 45 degree angle with no area around it. I'm sure GIMP can do that but the question is whether I can put that same photo on a website and have it look like it's a book on a45 degree angle.
View 4 Replies View RelatedI am tying to create a Dynamic Block of a steel angle of multiple sizes and thickness. I used Dynamic Blocks before and live the idea of changing sizes on the fly with out having to delete and recreate an object.. I got as far as creating an angle of different sizes, i.e.. 4x4, 5x5, etc. and different thickness but can't get the thickness to work with the radius of the angle.
View 2 Replies View RelatedHow to make a new work plane rotated at an angle to another plane and passing through the axis of a cylinder, or one of the main axes.On the plane commands, in V2013, i don't find an option for plane at an angle
View 1 Replies View RelatedHow do I perform chamfer on a cylinder?
View 4 Replies View RelatedI new to AutoCAD and I need to make a beveled egde on a cylinder. How would I go about doing that?
View 6 Replies View RelatedIn inventor 2013 I want to extrude a horizontal circle on surface of a bigger vertical hollow cylinder. but what i did it enters into cylinder, and i only want to extrude it on external surface.
View 1 Replies View RelatedI'm trying to create a telescopic cylinder motion in Inventor, making the cylinders move together.
Like in this video: [URL]
Is this possible without using inventor studio? I can't figure out what constraint or joint to use.
I want to creat a hollow cylinder. But I need to be able to unfold it to have a layout of the cylinder. So that when this DWG goes to the floor the technicans knows how much he/she will need from the sheet to roll the cylinder.
View 9 Replies View RelatedI'm having difficulty trying to create what could be described as a diamond pattern inside a cylinder. How to achieve this.
Please see picture for an idea of the pattern.
I created a cylinder with a hole through the center and need to add holes through the face into the center hole and I can't figure out how.
View 9 Replies View RelatedI received a drawing from a client, which has all the features on a coordinate system, But the drawing is rotated for some reason. Even after rotating the drawing the coordinates are the same as it was prior to rotation. I believe there may be some variables that has been changed for this. If a line is drawn A@100<0 it is drawn vertical instead of horizontal and like wise @100<90 is drawn horizontal instead of vertical.
Attached is the drawing.
I want to create a 5"x5" square protractor in photoshop. Basically I create a 5x5 canvas, and need to apply 360 lines through the exact center (not sure how to find center exactly) and have them go out in 360 different angles.
View 1 Replies View RelatedTrying to figure out how to create 3d 360 degree spherical panoramic. All my searches come up with older versions. CS6 does not have the 3d menu so where do I find out how?
View 6 Replies View RelatedI really want to create 360 degree views for my products. I can take the images no problem but need to stitch them together. Is this even possible with any Xara products? This is the kind of thing i'd like to do. [URL]
View 2 Replies View RelatedHow to unfold a or create a flat pattern out of a shelled cylinder with front faces on both ends?
View 9 Replies View RelatedSuppose I have a scene with an animated sphere and a static cylinder linked to the said sphere. Is there a way I can create position/rotiation keys for the cylinder?
View 3 Replies View Related