I'd like to orient a picture of a book so that it's on a 45 degree angle and then "cut out" the area around the "book" to that when you view the picture is looks like a book on a 45 degree angle with no area around it. I'm sure GIMP can do that but the question is whether I can put that same photo on a website and have it look like it's a book on a45 degree angle.
View 4 Replieswrapping a continuous line of text around a 90 degree bend. The third attached image is exactly what I need it to do. That is something I just put together as an example though.
I have some repeating information that I want to wrap around the border of an image. Being that it is repeating information, the text can also look like the first and second image uploaded, where part of the word is cut off. I would prefer this to be minimal though.
So far all I have found in my time searching on this leaves the words distorted.
No matter the complications, this also needs to be scripted. It is not feasible to do this manually as the repeating information is dynamic.
EDIT: The upload for the thumbnails is off.
Added Details.Attached File(s) textwrap2.jpg (8.9K)
Number of downloads: 19 textwrap2.jpg (8.9K)
Number of downloads: 17 textwrap.jpg (8.38K)
Number of downloads: 7
Is there a way to fill a selected area with 45 degree pattern?
View 1 Replies View RelatedIs there a shortcut to draw a 45 or 90 degree angle from a drawn line on an angle using the pen tool? ie. Rather than just from the x and y axis.
I trace a lot of maps and site plans.
Is there a quick way to rotate an object to match an angle without knowing what the angle is? I am using AutoCAD 2011 now. I was using 2007 and I had an add on command the would rotate an object using a base point and picking the two lines that make up the angle, and it would match the angle you wanted. I can not get that command to load in 2011.
View 4 Replies View RelatedI'm trying to sweep it around shape like this But it won't, it says "The selected path curve is not valid." - so what do I do? (it is polyline) Is there maybe some other way to get this 3D shape fast?
View 8 Replies View Relatedeasier way to program 45 degree corners on the top flange of two mating parts. We can't bend the ends on so they have to be welded. I am using inventor 2014 professional. Almost all my programming is done in sheet metal.
View 2 Replies View RelatedI'm experimenting with 3d printing and wish to create a tube system based on this vase. Im completely new with 3ds max. What's the easiest way to simply bend the entire model 90 degrees? URL...
View 2 Replies View RelatedI'm trying to draw the following bench in Autocad but I'm getting bogged down trying to figure out how to create the following tube with an angle on it and how to achieve different shapes at the top of tube.
View 9 Replies View Relateduntitled.jpg
Is there a way to convert those lines into plines, so i could extrude and cut.
I'm new to using Linux based software and do not know how to stitch multi photos together to form a panoramic picture?
View 4 Replies View Related I am trying to make a toilet paper roller; standard white ones with the spring inside [URL] .
I need to cut the bottom of the cylinder at a 45 degree angle from the center to wall so if the roller was standing, it would be at an angle of 45 degrees to.
I have attatched what I have so far.
I am having trouble with the slicing. I am not sure how to chop the whole cylnder at an angle.
Also how do I remove the yellow lines and the white line with the measurement .1280 (you'll understand when you open the file)
I am trying to make a cut on a 12" D cylinder at a 45 degree angle and i am having a little trouble. I have projected the shape onto the curve and sketched it. Now to finish the cut do i need to scuplt that path or how do I go about doing this.
I provided a screen print to try and and explain it a little batter. The half moon looking sketch is what i am tring to cut out of the cylinder. i have already projected the surface lines on the cylinder, but get stuck at this point
I am have a problem. How do you create a cylinder with a flat end on one side and on the other side have it at a 45 degree angle.
View 4 Replies View RelatedHow can rotate a circle 360 degree in PS CS6 in Time Line [for GIF animation]?
Transform [Rotating with Transform] is not work in Time Line? Like this, I want to rotate a rasterized circle 360 degree [like a Radar Indicator]...
I'm using AutoCAD 2012 and I'm having a problem with 3D orbit. For some reason I can only rotate the view 180° along the X axis. Y and Z are fine, I can rotate a full 360°, but the X axis "bottoms out" if I try to rotate the view more than 180°. Is there something toggled that's causing this?
View 1 Replies View RelatedIf there is a way to rotate an image in anything other then 90 degree increments?
View 4 Replies View RelatedWhat's the best way to model an alley with a 90 degree angle (turn). Do I treat it as an intersection with a zero radius? My typ section is 15 feet width with a 4% slope down to the center of pavement. "V" bottom. Not sure how to get it to model the outside corner and also eliminate the inside overlay.
View 8 Replies View RelatedI'm trying to create a dynamic block for plywood. I have the stretch parameter working so that I can stretch the plywood to the needed length. I also have set a rotation parameter based on the various roof pitches that we use. The problem is I would like to be able to rotate the sheathing to a 45 degree angle and then stretch along the 45 degree angle. Once I rotate the sheathing the stretch does not follow the rotation angle. I have attached the file.
View 9 Replies View RelatedHow to get the correct notation for the angle in degree/minute/second?
I wanted to show the angle as 29˚12’13’’ but not as 29d12’13’’
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
how do one wants to do a polar increment angle to make a degree in a autocad drawing. I want to design a truss but at the angle of the truss , how to make an angle between the top chord and lower chord. which icon i should click on ?
View 3 Replies View RelatedI'm trying to figure our how to taper a circular object 1-1/2" high on a 45 degree angle from the top down (that is the lower part goes in like a pie pan). Taper doesn't seem to work.
View 2 Replies View RelatedI am just getting started. I am modeling some tanks pumps and piping. How can I 3d rotate boxes and cylinders and constrain to 90 degree rotations?
View 9 Replies View RelatedOpen a new document in AI (CS5/CS6), and then draw some arts (rectangles), given an original point (such as 0,0), now I want to all arts in current layer rotate 30 degree around the origin. How to realize it?
View 1 Replies View RelatedIs it possible to rotate a viewport to an angle other than 90 degrees. I am trying to rotate a viewport 11 degrees counter clockwise. I cannot rotate the model.
View 1 Replies View RelatedIn Graphics Editing software like Photoshop you can rotate an image ever so slightly to the left or to the right. I'm trying to super-impose a png of a head onto something and I would like to match the angle of the original head.
View 4 Replies View RelatedI have this
Matrix3d cur = ed.CurrentUserCoordinateSystem;
Vector3d x = new Vector3d(1, 0, 0);
Vector3d y = new Vector3d(0, 1, 0);
Point3d o = new Point3d(0, 0, 0);
[Code] .....
Code is rotating well my model, but it's zooming to bad point. I want to zoom to the point from previous view, so I'm transforming it by new UCS - unfortunately something is going wrong (it's not this point what I want).
I'm making this diagram of the load condition acting on tunnels to explain a Japanese set of equations that are used for the structural analysis for tunnels:
load condition for EEM.jpg
But, there is one problem I have. I'm trying to set up the text for the dimension between the water table and the tunnel "Ha" to look horizontal.
However, if I click on the properties box and write 90 in the rotation box right next to where it says "text rotation," the dimension text does not rotate 90 degrees; if instead I try to rotate it 180° then it only rotates 90° (and in the opposite direction) instead of 180°. It doesn't matter how many degrees I choose, it won't rotate my dimension "Ha" to desired angle to make it look horizontal.
OK I know it's hard to explain my problem with just writing, so I've posted a few pictures:
In this one, the dimension is at 0°; I've only opened the properties box to attempt and rotate it: no rotation.jpg
Now I write 90 in properties box but the dimension text does not rotate at all; it remains at 0 as it is shown in the following image: 90 & no rotation.jpg
Next I try to rotate 180, just to see what happens; and it does rotate (only 90 degrees!): 180 rotates 90.jpg
I finally try to rotate the text 270 just to see if it rotates to desired angle and it does rotate (180 degrees from original position). As shown below:
270 last try.jpg
It doesn't matter how many degrees I choose, I cannot make it look horizontal.
How can I set up my dimension text "Ha" to look horizontal?
How do I rotate an object in Illustrator without chaging the angle of my drop shadow? I have a design that I want to place 2 up on a page and then print. When turn and stack them the shadow has changed its angel in relation to the artwork. I don't see where to lock the drop shadow to the object. Or is it secified a different way?
View 5 Replies View RelatedSo I have set up a new style for rotate balloon text in Inventor 2011. But I am running into a problem when I pull the balloon away from the view to have a leader it does not stay rotated.
View 1 Replies View RelatedI'm looking for a lisp routine that allow me to select a text object that is rotated to anything other than zero, and it will change the text object to zero rotation and while still in the command allow me to place the text object on the screen.
I have a routine that is similiar called RT180 but it just rotates whatever text object you select 180 degrees from its current rotation, but I can not figure out how to modify it to rotate to zero rotation angle. What I like about RT180 is that you select your text it rotates it on the spot and then lets you pick a spot to place it.