Open a new document in AI (CS5/CS6), and then draw some arts (rectangles), given an original point (such as 0,0), now I want to all arts in current layer rotate 30 degree around the origin. How to realize it?
View 1 RepliesI did it earlier, but now everytime I try "alt-click" to make the light blue cross hairs, nothing happens. I am trying to make a gear in illustrator and this is a key componant.
View 6 Replies View RelatedI have two maps of same area (different years) and I want to match them up as one map. I can load them both as layers and make the older map transparent so that I can see through to newer map, but older map is larger than the newer map (in the background). I can move the transparent map but I cannot make just the transparent map smaller to fit over the other map. I will also need to rotate the map slightly. When I try to resize it changes both maps. I have tried the transform and the move tool. So how can I make one layer smaller and rotate it it leaving the other layer intact?
View 2 Replies View RelatedCan I bend these paths making a 90 degrees curve pointing right so that the green line forms the inner curve with a smaller radius than the red line?
View 2 Replies View RelatedPrivate Sub UserForm_Initialize() Dim layerColl As AcadLayers Dim entry As AcadLayer Dim LayList As String Set layerColl = ThisDrawing.Layers For Each entry In layerColl ComboBox1.AddItem entry.Name Next End Sub
I have a form with a combobox. That combobox is filled up with all layers in a drawing. (see above)
Now I want to make the layer that I have selected (value) in the combobox the current layer in my drawing.
How can i make it current?
How can rotate a circle 360 degree in PS CS6 in Time Line [for GIF animation]?
Transform [Rotating with Transform] is not work in Time Line? Like this, I want to rotate a rasterized circle 360 degree [like a Radar Indicator]...
I'm using AutoCAD 2012 and I'm having a problem with 3D orbit. For some reason I can only rotate the view 180° along the X axis. Y and Z are fine, I can rotate a full 360°, but the X axis "bottoms out" if I try to rotate the view more than 180°. Is there something toggled that's causing this?
View 1 Replies View RelatedIf there is a way to rotate an image in anything other then 90 degree increments?
View 4 Replies View RelatedGreetings, frequently I need to identify the origin of a previously applied custom hatch pattern for use in a different area of the same drawing, is there a way to have the origin displayed and/or view its coordinates in 2009LT?
I had hoped that I could select multiple hatched areas & view their orgin points through "properties" & verify that the points of origin all align (in either the x or y axis), but this doesnt seem to be the case.
I need to identify the origin of a previously applied custom hatch pattern for use in a different area of the same drawing, is there a way to have the origin displayed and/or view its coordinates in 2009LT?
I had hoped that I could select multiple hatched areas & view their orgin points through "properties" & verify that the points of origin all align (in either the x or y axis), but this doesnt seem to be the case.
Ideally, I'd like to draw a line or circle from the origin of the original hatch
I'd like to orient a picture of a book so that it's on a 45 degree angle and then "cut out" the area around the "book" to that when you view the picture is looks like a book on a 45 degree angle with no area around it. I'm sure GIMP can do that but the question is whether I can put that same photo on a website and have it look like it's a book on a45 degree angle.
View 4 Replies View RelatedI am just getting started. I am modeling some tanks pumps and piping. How can I 3d rotate boxes and cylinders and constrain to 90 degree rotations?
View 9 Replies View RelatedIs there a way to fill a selected area with 45 degree pattern?
View 1 Replies View RelatedJust draw a rectangle and a circle, then give them different colors. Choose AI menu "Object | Blend | Make", before this step you could set "Specified steps" to an integer in "Blend Options...", now you get a series of blended arts. Using Direct Select Tool you can select the rectangle or circle you drawed at first.
how to know if the art object you selected is one part of the blended series? I looked into the document but cannot find a proper API to get the infomation in AIArtSuite.
Just draw a rectangle and a circle, then give them different colors. Choose AI menu "Object | Blend | Make", before this step you could set "Specified steps" to an integer in "Blend Options...", now you get a series of blended arts. Using Direct Select Tool you can select the rectangle or circle you draw at first.
My question is, how to write code to know if the art object you selected is one part of the blended series? I looked into the document but cannot find a proper API to get the infomation in AIArtSuite. (for CS5 & CS6)
How to make a duplicate copy of current document?
so that i can do the modification with duplicate document without changing the status of original document.
is there a way to tell Inventor to align the view to be perpendicular to the Origin axes when View Face or Sketch on face is selected?
It is most disturbing to have to work with the view cube once in the Sketch just to have it make sense?
This is in Inventor Pro 2012.
Is there a way to send a selected textFrame item to a layer using javascript?
I don't mind if it is send to current layer or some other way to accomplish the task.
(Using Adobe Illustrator CS4)
When I have an PSD icon set and I want to size a layer to a size that looks good. How do I see the dimentions of that layer so that I can select another layer and make it the same size.
View 4 Replies View RelatedURL...how to move the origin of a part when you want a common origin for everything. in iv2012 you also get angles about axis, in greyed out boxes.
In a test assembly I can get the offsetting to work, but not the rotations. The part I want to edit origin of is rotated in all three axis.
Is it possible to rotate an object to thecurrent UCS. I use UCS object quite a bit and want to align text to the mycurrent UCS without having to align it to an object. i.e. to select the text andsimply rotate it around the justify point to a set angle relative to the current view.
View 3 Replies View RelatedI have the below code (from a user here on the forum) which works great for aligning text, mtext and blocks to 2 points. For annotative entities, it respects the rotation angle for mtext and text.
ie I have an mtext object at 1"=20' scale and at 1"=40' scale. I run the command when the current annotative scale is 1"=40'. The object at 40' scale has changed, but the 20' scale is unchanged. This is working as I would like it to.
But for annotative blocks, it gets weirded out. In the above example, the block at 40' will rotate, but so will the attributes at 20' scale. But linework and hatching at 20' scale will be unchanged. it looks really weird. how to get it to play nice with blocks. Ideally, I'd like the block to be at different rotation angles in different annotative scales.
(defun C:R2P (/ ss ang edata); = Rotate objects to align with 2 Points (setq ss (ssget '((0 . "*TEXT,INSERT"))) ang (angle (getpoint "
First alignment point: ") (getpoint "
Second alignment point: ")) ) (repeat (sslength ss) (setq edata (entget (ssname ss 0))) (entmod (subst (cons 50 ang) (assoc 50 edata) edata)) (ssdel (ssname ss 0) ss) ))
I am trying to make a cut on a 12" D cylinder at a 45 degree angle and i am having a little trouble. I have projected the shape onto the curve and sketched it. Now to finish the cut do i need to scuplt that path or how do I go about doing this.
I provided a screen print to try and and explain it a little batter. The half moon looking sketch is what i am tring to cut out of the cylinder. i have already projected the surface lines on the cylinder, but get stuck at this point
How can you make 45 degree corners for top of garage doors?
View 4 Replies View RelatedWhen i click on the green line has you can see on the image. The layer toolbar wont show me the right layer, like if it's not working. But i can see the right layer inside propreties.
Is there a system variable to ajust to see my layers inside the Layer tool bar?
how do one wants to do a polar increment angle to make a degree in a autocad drawing. I want to design a truss but at the angle of the truss , how to make an angle between the top chord and lower chord. which icon i should click on ?
View 3 Replies View RelatedI'm currently using AutoCAD LT 2012 and when I create a new layer and set it as current in the layer manager, regardless of what color I set the new layer to, the new layer's color remains the same as the previous one in the properties box even though the colors of the layers are always set to "by layer."
View 3 Replies View RelatedI have a block of a guide sign with directions and azimuth angles. I made arrows rotatable and angles were changing ok. But when I try to rotate an arrow into zero position, dimension shows 180. I need the dimension to show 0 degree. How can I do it?
And I can’t make angular dimension show degrees greater than 180 even if I specify vertex – after rotation angle shifts on the other side. I gave up and used back azimuth.
And I can't make an attachment: "The contents of the attachment doesn't match its file type"?
I cannot select origin to constrain sketch with dimension to origin?
I selected Sketch,
expanded origin,
selected mywork plan (xy)
drew rectangle,
input dims,
right click for marking menu,
selected dimensions,
Origin is yellow,
cannot select it and then edge of rect to set dim that will center sketch on origin? Just like the videos show, but cannot select origin>
How to make Multi Leader end line landing or turn 90 degree vertical? I just want to use the leader point to the part and no text at the end of the leader. I guess the only way i know how to do right now is to exploded the M-leader and draw a line vertical down which is not recall proper way . Some people like to use just Leader not Multi leader but i like to use M-leader so i can enter the text in difference line. (See Pic below)
1e.jpg
way to do this from the layers menu (ctrl-click new layer icon), but is there a key combo? I use shift-ctrl-n a lot to make new layers, but often I need to make a new layer *below* the current layer.
View 1 Replies View Related