AutoCAD LT :: Viewing / Displaying Current Origin Of Hatch Pattern?
Nov 1, 2011
Greetings, frequently I need to identify the origin of a previously applied custom hatch pattern for use in a different area of the same drawing, is there a way to have the origin displayed and/or view its coordinates in 2009LT?
I had hoped that I could select multiple hatched areas & view their orgin points through "properties" & verify that the points of origin all align (in either the x or y axis), but this doesnt seem to be the case.
View 4 Replies
ADVERTISEMENT
Oct 31, 2011
I need to identify the origin of a previously applied custom hatch pattern for use in a different area of the same drawing, is there a way to have the origin displayed and/or view its coordinates in 2009LT?
I had hoped that I could select multiple hatched areas & view their orgin points through "properties" & verify that the points of origin all align (in either the x or y axis), but this doesnt seem to be the case.
Ideally, I'd like to draw a line or circle from the origin of the original hatch
View 3 Replies
View Related
Jan 20, 2014
As in the title, expected result in attached drawing. I'm trying to change Origin X /Y, but that doesn't change the origin of the hatch. It there a setting that controls it?
P.S. Is that drawing supposed to be 0.8Mb??
View 8 Replies
View Related
Aug 19, 2013
I have a drawing that is displaying the origin with XYZ and the drawing seems dimmed. It also is running very slow. I feel like I've gotten into an editing mode and was unaware. I've tried chanding views and UCS. When I open other drawings things are normal and faster.
View 5 Replies
View Related
Jan 16, 2013
Typically when I click on the Set Origin button, all I then have to do is click on the page where I want the hatch origin to be, and everything works just fine.
I work on a shared computer. Start working this morning, and now when I click on the Set Origin button, it prompts me to inform it "SIngle or SUbobject?". And through a number of further selections, I can eventually get around to selecting my origin and having things shift around properly. But that really slows me up. Seems like one of the system variables got changed. I've doodled around a bit online, but haven't been able to find how to get things back to how they used to be.
And I tried opening a new page, restarting the program, etc., and the new way the button works has taken hold. I can't get it to reset. So on my computer (not working properly) when you click on the Set Origin button, the command line says "Command: _-hatchedit select hatch objects..select hatch objects: _S" then it says "ambiguous response, please clarify" "SIngle or SUbobject?"
On the computers that are working properly it only displays the "select hatch objects: _O" and doesn't show the _S part.
View 2 Replies
View Related
Oct 18, 2012
I have a simple brick like hatch that is set to have a full tile at the origin of the hatch. All is well when the hatch is horizontalbut when the hatch is rotated within the hatch edit box it loses the origin and it won't set with a full tile.
How can I get the origin to be the same at any angle and the hatch start with a full tile????????
View 9 Replies
View Related
Apr 7, 2013
Open a new document in AI (CS5/CS6), and then draw some arts (rectangles), given an original point (such as 0,0), now I want to all arts in current layer rotate 30 degree around the origin. How to realize it?
View 1 Replies
View Related
Sep 17, 2011
How to locate the 'starting point' for hatch patterns and filled regions? I am laying the hatch in a bathroom and I want the pattern (which is representing tile) to start in a particular corner.
View 2 Replies
View Related
Feb 21, 2012
how to write a field that will add or subtract one from the drawing number. I'm adding drawing join line text to drawings so I need the text on the left to read one less than the current drawing & text to the right to read one more.
in drawing 005 text would read "joins drawing 004" & "joins drawing 006"
This is the field for file name (drawing number)
%<AcVar Filename f "%fn7">%
Any way to adjust this to add or subtract one?
View 1 Replies
View Related
Jan 22, 2012
I have a hatch (that is not solid). Sometimes it displays as a solid hatch though, although if I move the hatch (even slightly) the display issue is resolved and the hatch displays properly (i.e. not solid anymore). Regen doesn't fix the display issue, only moving the hatch slightly (temporarily).
I'm not sure how far away from the origin the hatch is although it is no further than what it would normally be when it works fine (and it can't be moved closer to the origin anyway as that would screw up my models real world coordinates).
View 9 Replies
View Related
Aug 13, 2013
I am trying to find out how the drafting pattern origin is determined in Revit 2013. A model pattern is very easy to adjust, but this is not true of a drafting patterns. How the drafting patterns even determine what their origin is. Is it centered on a project extents - therefore changing as the model expands, or is it set by a 0,0,0 origin similar to AutoCAD (but hidden). In an event it does not seem that this origin is adjustable (unless someone out there knows some Revit magic) so perhaps it does not matter, but I would like to know.
View 5 Replies
View Related
Feb 1, 2012
In the hatch dialogue there is a setting to target the hatch to a specific layer. How does one set the default to ALWAYS be "Use Current"?
Attached jpg shows the target layer as ffbrg, but I want that to ALWAYS read "Use Current" when creating a NEW hartch. In other words, I am happily working in a specific layer creating all these hatches and then realize LATER that all the hatches were in different layers causing great confusiion and havoc.
View 9 Replies
View Related
Jun 29, 2013
I am unable to fill objects with any sort of hatch in my current drawing. Other drawings are fine, but in this one, nothing will hatch, either form the tool palettes option or from the hatch menu.
View 7 Replies
View Related
Apr 1, 2011
I have a patern, I need to move, I know in advanced I can more it with Origin, but I have to close and open the window.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
View 1 Replies
View Related
Dec 8, 2011
I recently downloaded new hatch pattern that were not in the AtoCAD hatch list and I really need..step to install them to the hatch list so AutoCAD can recognize them?
View 5 Replies
View Related
Feb 15, 2006
Where the aclt.pat is stored? I could not find it in my cad file.
Are there anyother easier way to add a hatch pattern? In-addition, How do I use the command HPNAME (initial vale = ANSI31) what values can i set?
View 4 Replies
View Related
May 14, 2013
I have a bit of code that I use to create hatches but the names are just coded inside (like "BRICK" or "CLAY"); I would like to list all available patterns for the curent drawing(on a form, using a combobox, etc), which is the best way to go?
View 2 Replies
View Related
Dec 22, 2010
I have a hatch Pattern 'DOTS' (A default AutoCAD Pattern) filled in an area in my drawing. The layer is plottable. The pattern is in proper scale (I have attached a screen shot). Now, when I publish a PDF, though it shows up in the preview, it is missing in the pdf.
View 9 Replies
View Related
Jan 18, 2012
How to make a hatch pattern with the words "NO GAS" on it.
Im using AutoCAD 2012.
View 9 Replies
View Related
Oct 4, 2012
I cannot select origin to constrain sketch with dimension to origin?
I selected Sketch,
expanded origin,
selected mywork plan (xy)
drew rectangle,
input dims,
right click for marking menu,
selected dimensions,
Origin is yellow,
cannot select it and then edge of rect to set dim that will center sketch on origin? Just like the videos show, but cannot select origin>
View 6 Replies
View Related
Jul 15, 2011
I have created hatch in the same drawing but some hatch appears denser than other hatch yet they are all the same type of hatch, scale etc
I have changed the measurement variable from 0 - 1 but no luck
View 4 Replies
View Related
Jan 7, 2014
Any wave hatch pattern of know where I can download one. I have already been to [URL]........ but the files are only gifs.
View 3 Replies
View Related
Jan 4, 2014
I am using Autocad 2013 , and i have download many more hatch pattern from web , But i haven't know how to apply this hatch pattern in autocad 2013 .
View 1 Replies
View Related
Nov 16, 2011
The hatch appears correct on the screen, but when printing there are voids created on the printout. These voids appear in different areas for each print. Our plotter is HPT790, that has all the software updates.
View 1 Replies
View Related
May 30, 2013
I have Autocad Architecture 2014 installed on my office PC and Laptop.A drawing with a hatch pattern set to a scale of 1 on my laptop needs to be changed to a scale of 25.4 to look the same on my PC. Both versions of ACA are US metric.
View 3 Replies
View Related
Feb 9, 2012
In architecture 2012, I'm trying to get the Hatch Pattern Dialog Box to come up to see if I have custom hatch patterns loaded.
They do not show up in the drop down menu in Hatch Creations.
How do I get the Hatch Pattern Dialog Box to come up?
View 7 Replies
View Related
Dec 4, 2013
I have a CAD station that is having all sorts of issues all of a sudden. When one of our architects opens her drawings she gets the "Hatch - Large, Dense Hatch Patterns" dialogue box.
When I we choose the "Do not convert these hatch patterns" and open the drawing, it converts all the hatch patterns to solid anyway. This is mostly affecting the walls and converting all the hatch into one solid blob of a hatch.
One weird thing is this only happens in the medium detail display configuration. I can go to any other display and it is fine. The other weird thing is that these same drawings open fine on any other computer so it has to be a system problem.
The other gremlin I solved yesterday was that the system all of a sudden was not recognizing the LTYPESHP.SHX file. I had to add the DataCache support folder containing a ltypeshp.shx file to the support file search path.
View 2 Replies
View Related
Oct 3, 2012
Is it possible to assign hatch patterns for material styles? I need IV13 to draw Ansi32 for steel and Ansi31 for Aluminum automatically.
View 4 Replies
View Related
Nov 5, 2007
When I add the hatch pattern to the tool palette and then try to use it, it defaults the boundaries add command to pick points. Is there a way i can have it default to select objects?
View 1 Replies
View Related
Oct 17, 2012
Why does my hatch pattern look different on sample in the hatch window and on the actual drawing?
I attached a picture where the top part is what it should look like and the bottom part is how it looks like on my drawing.
View 3 Replies
View Related
Jun 28, 2013
How can i set the regular hatch pattern in AutoCAD LT 2014?
setvar hpname "ansi31"
After installation it is set to ANGLE.
I tried to save this with my template.dwg, but it is not there after a restart.
I want to save this in the general LT settings.
View 5 Replies
View Related
