AutoCAD 2013 :: Bevel Edge On Cylinder
Nov 2, 2012I new to AutoCAD and I need to make a beveled egde on a cylinder. How would I go about doing that?
View 6 Replies
ADVERTISEMENT
AutoCAD 2013 :: OTrack Distance From Top Circle Edge Of Cylinder To Certain Distance
Jul 30, 2012I am trying to oTrack distance from the top circle edge of a cylinder to a certain distance ... whenever i try to do that ... it either track to x and y .. but not in z :/ ... the video i have on you tube he did it so simply and it seems to be easy .
I am not sure what is wrong .. but i heard parallel and perspective view could make a difference .. i actually try both :/ ...
[URL].....
AutoCAD Inventor :: Edge Of Cylinder Not Projecting Using Project Geometry
Mar 27, 2012I'm trying to project an edge of a cylinder in a "detail" view. Here's the process I'm taking. Click the view and pick "create sketch", then I pick "Project Geometry". Then I pick the edges of the cylinder I'd like to project and it only projects one side. I can select the edge, but when I right-click and pick done it won't project it. It appears to me that it's only allowing one edge of the same object to be projected. I've tested other objects and it seems to only do this with cylinders.
Is this a setting or a bug in 2012?
Maya Modeling :: How To Bevel Edge With More Than One Segment
Oct 11, 2013Is there a way to bevel a edge like in the first screenshot with more than one segment without getting those marked n-gon faces shown in the second screenshot. i've been playing around with all the settings of the bevel tool but i always get those faces that i dont need and have to delete manually.
View 1 Replies View RelatedAutoCAD Inventor :: Tangent Constraint Of Edge Of A Cylinder To Revolved Side Of Another
Apr 2, 2012Is it possible to apply a tangent constraint to an edge of a cylinder at an angle to the revolved side of another cylinder? I wan't to avoid applying a specific angle constraint if at all possible.
View 3 Replies View RelatedIllustrator :: AI Bevel Tool Causing Pixelated Edge?
Dec 2, 2013Why does the color look strange, is it only because it's green? I have it set to custom color>green because no color/black was only grey. This is still desaturated & very grey. Playing with the settings didn't seem to work.
What's with the pixelated edging? It's an inner bevel & appears on the rounded parts.
Illustrator :: 3D Extrude Bevel - Defect Visible On Edge Of The Circle
Apr 25, 2013When I extrude/bevel a perfect circle (Illustrator CS6 Mac), there is a defect visible on the edge of the circle. Please see 4 images attached. Is this normal, and is there a fix or workaround?
View 2 Replies View RelatedAutoCAD 2013 :: Perform Chamfer On A Cylinder?
Nov 2, 2012How do I perform chamfer on a cylinder?
View 4 Replies View RelatedAutoCAD Inventor :: Extrude A Horizontal Small Cylinder Across A Vertical Big Cylinder
Nov 11, 2012In inventor 2013 I want to extrude a horizontal circle on surface of a bigger vertical hollow cylinder. but what i did it enters into cylinder, and i only want to extrude it on external surface.
View 1 Replies View RelatedAutoCAD 2013 :: Create 3D Cylinder With 45 Degree Angle Cut On Other End
Jun 18, 2012I am have a problem. How do you create a cylinder with a flat end on one side and on the other side have it at a 45 degree angle.
View 4 Replies View RelatedAutoCAD 2013 :: Can't Dimension To Circle Edge
May 31, 2013I'm having a dimensioning problem, and it doesn't seem to matter if it something I have created or something a customer has sent to me.
When I attempt to dimension a circle, I get the following error message:
Select arc or circle: Object selected is not an arc, circle or polyline arc segment.
A few days back, I got this error message, and when I came in the next morning, I was able to dimension the circle.
Windows 7 SP 1
64 Bit.
Inventor 2013
ACAD Mechanical 2013
AutoCAD 2013 :: Fillet Edge Of Extruded Spline Shape
Aug 16, 2013Autocad 2014.
I have the outline of a solid body guitar that I drew with spline, extruded and now trying put a 1/2" fillet radius along the edges, top and bottom.
Using the 3d fillet command produces an error, and extruding a profile along the edge path doesn't work either.
Attached is the spline outline, the red part is what needs the fillet, but the white part does not. However, they can't be extruded into a 3d solid unless their joined!
AutoCAD 2013 :: Comprehending Edge Option In Extend Command
Apr 27, 2012I've been practicing my autocad and I'm having a problem comprehending the Edge option in the Extend command. I have tried using both options i.e. "extend" and "no extend" and I don't see any difference. What is the purpose of the edge command and it's two options?
View 8 Replies View RelatedAutoCAD Inventor :: Draw Bevel Gears From Drawings?
Sep 28, 2012I am trying to draw a bevel gears from drawings, one is a scroll plate and the others are gears with a key hole. As you can see in the following attachment.
My question is how do you draw bevel gears on the face of the scroll plate and the cylindrical face of the other 3 gears?
AutoCad :: How To Transform 2D Drawing Into 3D Spiral Bevel Gear
Jul 24, 2013I have the attached drawing of spiral bevel gears; MBSG2-2040L.dwg
it has been taken from this site [URL]
how do I transform it into a 3d structure from that 2d drawing? is all the needed information comprised in it? I can not figure out the shape of the teeth. There is also a 3d version of the gears for autodesk inventor; is there a way I could transform that into an autocad 2011 compatible version (I don't know much about autodesk inventor ).
AutoCAD Inventor :: Bevel Gears With Straight Teeth
Dec 10, 2013Is it possible, using Design Accelerator to have Bevel Gears with straight teeth? I've tried every combo I can think of, and they are always curved teeth. Gears are not my most knowledgeable subject. I usually have the engineers produce the specs, & I get to draw them - they are not happy with the pictorial results.
Inventor Product Design Suite Premium 2013
Maya :: 2013 Student Crashing At Edge Snap To Point
Oct 27, 2012I have an issue with the student version of Maya 2013. This issue is reproducible in my environment when I try to align an edge to a snap point pressing the V key and move the edge with the move tool. May 2013 hang then and I have to close it ending the task in the task manager.Many times I deleted the Maya folder in my documents folder in order to start from the scratch, but it hangs again if I try the procedure i described above. Some times it take more time until Maya hang, some times after a few moves.I have installed Maya 2013 many times from the scratch, deleting before all the directories in the different locations (as described in an Autodesk paper).I have to run Maya 2013 while I need to export my files with an exporter which just work in the 32bit version of Maya.
In the Event log viewer from Windows 7 x64 there are two records during this hang:
Fault bucket 50, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: maya.exe
P2: 13.0.186.0
P3: 4f44e75c
P4: 6ca2
P5: 2048
P6:
P7:
P8:
P9:
P10:
Attached files:
C:UsersLecraAppDataLocalTempWER3959.tmp.appcompat.txt
C:UsersLecraAppDataLocalTempWER39C7.tmp.WERInternalMetadata.xml
These files may be available here:
C:UsersLecraAppDataLocalMicrosoftWindowsWERReportArchiveCritical_maya.exe_8736ecaa762b7ca1a2f14929fe98d82f9482e8_0877449f
Analysis symbol:
Rechecking for solution: 0
Report Id: 382b88ab-2041-11e2-82ba-3860770f5418
Report Status: 0
The second one:
The program maya.exe version 13.0.186.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 18a8
Start Time: 01cdb44cd78b5da1
Termination Time: 65
Application Path: D:PROGRAMSMaya2013inmaya.exe
Report Id:
Installed Maya on three different hard disks (one is a SSD)but no difference.Below my hardware:
HP HPE H8 Desktop Intel Core i7-2600 CPU 3.4GHz, 16GB RAM, 64bit Windows 7, NVIDIA GeForce GTX 550 Ti with 4MB RAM.
I know that my graphic card is not in the hardware compatibility list and I will replace them with an ATI V5900 which is on the list.
AutoCAD Inventor :: Draw Spiral Bevel Gears System
Mar 30, 2012I'm trying to draw a spiral bevel gears system KLINGELNBERG , but the results do not match the actual measurements of the piece.
ex. measure of the real outside diameter of the gear = 356mm
DATA :
number of teeth pinion = 9
number of teeth gear = 44
module = 5
shaft angle = 90 °
face width = 59mm
helix angle = 35 °
pressure angle = 20 °
AutoCAD 2013 :: Trim A 3d Solid Using Another 3d Solid As A Cutting Edge?
Aug 27, 2013Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies View RelatedMaya Modeling :: Insert Edge Loop Tool 2013 Not Sliding
Oct 10, 2012I was trained in Maya 2008, and recently made the leap to Maya 2013.
When I try to use the Insert Edge Loop Tool, it seems to only select an existing edge loop, and will not allow me to slide along an edge to place the new one. I have even tried to use the Insert Edge Loop Tool on a simple polygon cube, to make sure this isn't a complex mesh issue.
AutoCAD Inventor :: Simulation Of Bevel Gears Using Contact Rather Than Transitional Constraints
Jan 28, 2013I'm trying to run a simulation of 2 bevel gears without using the transitional/rotation constraint, but using the contact between the surfaces to simulate the rotation of the gears - basically I have an L-shaped shaft running through both centers and want to have the upper gear grounded, make the lateral gear rotate around its own axis - the goal is simply to see the contact between the gears make the side gear rotate around the vertical part of the l-shaped shaft, due to the contact forces.
View 2 Replies View RelatedAutoCAD Inventor :: Embossing Into A Cylinder
Feb 24, 2012I need to emboss ( cut in ) some grooves into a cylinder, but in such a way, so that they won't get narrower. What do you think would be the best way to do that?
View 2 Replies View RelatedAutoCAD Inventor :: Seam In A Cylinder
Apr 28, 2012I have made a sheet metal cylinder with a rip. I am trying to create a seam on this rip as is done in [URL] ....... about half way through.
I have tried to go through the same steps, but I can not select the inside of the rip to built hems and flanges on. I also tried to make the cylinder by sketching 350 degrees of the cylinder instead of creating a rip, This had the same problem.
Why I can't select these edges or how I can work around it?
AutoCAD Inventor :: Creating Rib To Cylinder?
Mar 10, 2009How can I create a rib that touches a plane and the end of a cylinder? Inventor will not do it since the thickness of the rib does not touch the cylinder (see attachment).
View 8 Replies View RelatedAutoCad :: Draw A Cylinder On 2005?
Jul 11, 2012I have version Auto Cad 2005 and was just looking for so pointers.
I have set myself the challenge of drawing a locking pin I wish to get manufactured the dimensions are Ø 10mm x 180mm in length with a 20mm Ø flat plate on the end.
Where would I start in Auto cad?
AutoCad 3D :: Extruding A Shape Onto A Cylinder
Oct 17, 2011I am having trouble extruding(cutting) a shape into a cylinder. I want to cut the cylinder with a certain shape but I want to cut it tangent to the cylinder instead of just straight down through it like a front view.
View 4 Replies View RelatedAutoCad 3D :: How To Bend 3D Cylinder / Pipe
Jan 30, 2006I am trying to make a exaust pipe for a semi i am making in autocad 2006 and the pipe bends at the top. so i was wondering how can i bend a 3d cylinder/pipe?
View 9 Replies View RelatedAutoCad 3D :: Flat Pattern Around A Cylinder?
Jan 16, 2013I have a tube modeled in AutoCAD that is 1.5" OD and 1.25" ID. Along with it, I have a piece of flat 2D geometry representing a pattern to be cut into it.
Is there a way to either wrap the geometry around the tube and extrude out the shapes, or a way to extrude the geometry to the correct thickness and wrap it into a 1.5" OD tube?
AutoCad :: Block For Forklift Gas Cylinder?
Aug 26, 2011Looking for a block for a forklift gas cylinder?
View 1 Replies View RelatedAutoCad 3D :: Delete Top / Bottom Of Cylinder
Mar 28, 2012I drew a cylinder and now I need to delete its top and bottom. How can I do that?
I used Draw - 3D Modeling - Meshes - Primitives - Cylinder to create the object. And after that I'm lost, because most of the tutorials online are for Windows based CAD, but I can't find same commands on my Mac.
AutoCAD VB :: Extrude Circle / Cylinder VBA?
Feb 28, 2012Im just starting to get my head around VBA in AutoCad. I have managed to write a code that creates a 2D truss in polylines by coordinates I have arranged in an Excel file. Now I need to extrude each member into a cylinder. Well Im not really that smart yet, having some hard time with choosing path and region.
View 9 Replies View Related