AutoCad 3D :: How To Bend 3D Cylinder / Pipe
Jan 30, 2006I am trying to make a exaust pipe for a semi i am making in autocad 2006 and the pipe bends at the top. so i was wondering how can i bend a 3d cylinder/pipe?
View 9 Replies
ADVERTISEMENT
AutoCAD Inventor :: Bend A Cylinder At Several Places
Dec 27, 2012I want to do a simple bend of a cylinder. That is, I have made a 40inch length and want to bend it at several places.
I keep finding a reference to bend part but the tool does not exist in Inventor.
Maya Animation :: Rigging Cylinder To Bend In Arc?
Nov 28, 2010So I'm trying to rig this arm to bend, but with more "bow" than "bend", if you get what i mean..
I thought I could create an IK handle, but at the moment it bends only at 1 joint. I would like it to bend further up the arm,in an arc shape.
AutoCAD Civil 3D :: Pressure Pipe-bend Less Than 11.25
Oct 16, 2013I have a watermain project and am going to design by Civil3d2013.
I just realized that Civild3d has 90-45-22.5-11.25 which are excellent for waterworks.
What should I do for degrees less than 11.25 .
AutoCad 3D :: Convert Single Line Containing 42" Radius Curves To Solid 4" Diameter Cylinder / Pipe
Apr 14, 2013How to convert the single line below containing 42" radius curves to a solid 4" diameter cylinder/pipe?
Capture.jpg
AutoCAD Inventor :: Extrude A Horizontal Small Cylinder Across A Vertical Big Cylinder
Nov 11, 2012In inventor 2013 I want to extrude a horizontal circle on surface of a bigger vertical hollow cylinder. but what i did it enters into cylinder, and i only want to extrude it on external surface.
View 1 Replies View RelatedAutoCAD Civil 3D :: Pipe Network Storm Sewer Pipe Plan View
Nov 20, 2013Pipe network storm pipes: Fairly new to Civil3D and trying to set up parts list for the storm sewer pipe and would like the plan view to appear as it does currently. We use a polyline for centerline of pipe, similar to dashed linetype but line and space are the same, width set to pipe width.
View 1 Replies View RelatedAutoCAD Civil 3D :: Edit Pipe Network - How To Trim Pipe That Pass Through Manhole
Sep 25, 2012I created pipe network for my storm drain project. I have located all the structures (manhole) to all angle point of my alignment as required. Also I "insert" manhole every 400' per local code requirements using the command "network layout tools; structures only. My problem is I couldn't find the tools how to trim the pipe that pass through the manhole. Please see attached pdf file.
View 1 Replies View RelatedAutoCAD Inventor :: Existing Pipe Route To Create A New Pipe Run And Place It Into New Run?
Mar 6, 2013Is there a way in inventor if you have an existing pipe route to create a new pipe run and place that existing route into the new run.
View 3 Replies View RelatedAutoCAD Civil 3D :: Depicting Both Slice And Cross Cut Pipe Profiles Of One Pipe
Jan 8, 2014One of the things I seem to struggle with is being able to depict a single pipe when it needs to be shown in one profile as a crossing pipe, and another profile where you you show a lenghwise slice through the pipe. I end up tracing the pipe with eliptical objects where I'm cutting across the pipe and setting up more for the lengthwise/sideview of the pipe. Is there a way to have two different styles for the same pipe, one for a cross cut and one for a lengthwise slice?
View 1 Replies View RelatedAutoCAD Civil 3D :: How To Include Pipe Min / Max Cover As Part Of Str / Pipe Label
Nov 26, 2013is there a way to include the pipe min/max cover as part of the str/pipe label?
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
AutoCad :: Pipe Cutting Template - How To Unwrap Pipe Into Flat Section
Dec 27, 2003I have these two pipes, one is 4" diameter (running horizontally) and the other is 6" diameter running at a 30degree from horizontal angle. eventually the two hit, and at that intersection I need to make the 4" pipe join to the 6"' pipe, which then continues on its merry way farther down the structure. So I can extrude the two pipes, and I can even make a union and then remove the excess of the 6" pipe, because what I am really looking for is: a cutting diagram for the joint where the remaining 4" pipe hits the 6" section. A cutting diagram for the short piece of a Y joint.
I can make this image appear on my screen, but I am then stumped as to how to unwrap the pipe into a flat section so that I can see the curvature of the cuts required in planar view, for the real pipe that I have on my shop floor.
AutoCAD Inventor :: Create Pipe Route Using The Tube & Pipe Run
Jul 26, 2013I'm trying to create pipe route using the tube & pipe run. And its not constrained when I try to drag away. I tried grounding the components which is not working either. since the routing opens in 3dsketch its kinda tricky to make it fully constrained.
View 2 Replies View RelatedAutoCAD Civil 3D :: Connecting Pipe To Different Pipe Network Structure
Jun 20, 2012Using Network Layout Tools, can you attach a pipe to a structure in a different Pipe Network? 2013 Civil 3D
View 6 Replies View RelatedAutoCad :: Bend 2D Object?
Sep 25, 2013Is there any way I can bend a 2D object? I have a drawing of a hydraulic hose running straight in the x axis. What I want to do is to be able is to bend the hose around 90 degress (to fit in a case) without altering the overall length & width. I have attached a simple drawing that should explain the problem. I know the lengths don't match, this is purely for illustration
View 9 Replies View RelatedAutoCAD Inventor :: Cut Across Bend Feature
Dec 27, 2013I'm trying to use the cut across bend feature on a sheet metal part. However, when I check cut across bend, it grays out all of the other cutout options, and only has thickness as the only option. This is perplexing to me, because I can't think of too many times I'd need this option other than when there is more than one thickness of material I need to manipulate the profile onto.
I was to understand that this "cut across bend" is for use similar to the "normal cutout" command in solid edge? Keeps the cut perpendicular to the sheet face in a sheet metal part.
Cybertron PC
Intel Core i5-3470 CPU @ 3.20 GHz 3.60 GHz
16.0 GB RAM
Windows 7 Professional 64 Bit
3D Connexion Space Pilot
Inventor Professional 2014
Autocad Mechanical 2014
AutoCAD Inventor :: Can't Dimension A Bend
Jun 7, 2013I attached an IPT file that a customer sent us to manufacture for them.It's a rectangular aluminum tube with two bends.In the IDW when I try to place center points and dimension the radius it is not recognized.The original file was a STEP.
View 9 Replies View RelatedAutoCAD Inventor :: Is There A Way To Bend At Assembly
Feb 14, 2012Under the modify tab in a part file, I can drop down and click "bend part." We have a bunch of frames made out of stock tubing that are welded together, then bent as a whole. Is there a way to bend at the assembly? I want the model to represent the production process. I don't want to have to bend each tube alone, then reassemble. That would double my parts/part numbers.
View 9 Replies View RelatedAutoCad 3D :: How To Draw 3D Bend With Given Elevations
Aug 31, 2011I am using autocad 2d from last 5 years. i want to draw a rectangular bend at a given elevation as shown in enclosed sketch. How to draw the same.
View 1 Replies View RelatedAutoCad :: Arc To Stretch With Angle Of Bend
Sep 20, 2011I draw ventilation ductwork all day at work, just recently stumbled across dynamic blocks.
Attached is what i have done so far, the straight section works perfectly, just having some trouble with the radius bend. What I need is for the arc to stretch with the angle of the bend.
TEST.dwg
AutoCAD Inventor :: Embossing Into A Cylinder
Feb 24, 2012I need to emboss ( cut in ) some grooves into a cylinder, but in such a way, so that they won't get narrower. What do you think would be the best way to do that?
View 2 Replies View RelatedAutoCAD Inventor :: Seam In A Cylinder
Apr 28, 2012I have made a sheet metal cylinder with a rip. I am trying to create a seam on this rip as is done in [URL] ....... about half way through.
I have tried to go through the same steps, but I can not select the inside of the rip to built hems and flanges on. I also tried to make the cylinder by sketching 350 degrees of the cylinder instead of creating a rip, This had the same problem.
Why I can't select these edges or how I can work around it?
AutoCAD Inventor :: Creating Rib To Cylinder?
Mar 10, 2009How can I create a rib that touches a plane and the end of a cylinder? Inventor will not do it since the thickness of the rib does not touch the cylinder (see attachment).
View 8 Replies View RelatedAutoCad :: Draw A Cylinder On 2005?
Jul 11, 2012I have version Auto Cad 2005 and was just looking for so pointers.
I have set myself the challenge of drawing a locking pin I wish to get manufactured the dimensions are Ø 10mm x 180mm in length with a 20mm Ø flat plate on the end.
Where would I start in Auto cad?
AutoCad 3D :: Extruding A Shape Onto A Cylinder
Oct 17, 2011I am having trouble extruding(cutting) a shape into a cylinder. I want to cut the cylinder with a certain shape but I want to cut it tangent to the cylinder instead of just straight down through it like a front view.
View 4 Replies View RelatedAutoCad 3D :: Flat Pattern Around A Cylinder?
Jan 16, 2013I have a tube modeled in AutoCAD that is 1.5" OD and 1.25" ID. Along with it, I have a piece of flat 2D geometry representing a pattern to be cut into it.
Is there a way to either wrap the geometry around the tube and extrude out the shapes, or a way to extrude the geometry to the correct thickness and wrap it into a 1.5" OD tube?
AutoCad :: Block For Forklift Gas Cylinder?
Aug 26, 2011Looking for a block for a forklift gas cylinder?
View 1 Replies View RelatedAutoCad 3D :: Delete Top / Bottom Of Cylinder
Mar 28, 2012I drew a cylinder and now I need to delete its top and bottom. How can I do that?
I used Draw - 3D Modeling - Meshes - Primitives - Cylinder to create the object. And after that I'm lost, because most of the tutorials online are for Windows based CAD, but I can't find same commands on my Mac.
AutoCAD VB :: Extrude Circle / Cylinder VBA?
Feb 28, 2012Im just starting to get my head around VBA in AutoCad. I have managed to write a code that creates a 2D truss in polylines by coordinates I have arranged in an Excel file. Now I need to extrude each member into a cylinder. Well Im not really that smart yet, having some hard time with choosing path and region.
View 9 Replies View RelatedAutoCAD Civil 3D :: 90°bend In Dike Alignment
Mar 13, 2012I'm working in on a dike alignment that has a 90° bend and the contours are following the side slope to existing grade and then goes back to center top of new grade of dike at the bend.
So the contours shows a dip in plan view. So the center of dike alignment doesn't follow top of new grade. Is there something I can use to the contours follow the alignment correctly instead of a dip?
AutoCAD Inventor :: How To Change Radius On A Bend
Oct 21, 2011I have been trying to bend a larger radius on a corner bend but i can not seem to be able to . I start out with a face of 46" x 82" i want to put a 1/2" bend up then a 1/2" bend out to make a z shape i'm using as a material .109 stainless steel and i want to end up with a 1/2" on the inside corners so that when i'm done i can flatten it out to get the proper sheer size for the piece the metal brake i'm using has a 1/2" die in thats why i trying to figure this out is their any way to put this kind of radius on the sheet metal bends.
View 2 Replies View Related