I have version Auto Cad 2005 and was just looking for so pointers.
I have set myself the challenge of drawing a locking pin I wish to get manufactured the dimensions are Ø 10mm x 180mm in length with a 20mm Ø flat plate on the end.
Where would I start in Auto cad?
I'd like to draw an half elliptic cylinder with its base on a yz plan ... but I don't find the tool to change from xy to another plan.
View 4 Replies View RelatedIn inventor 2013 I want to extrude a horizontal circle on surface of a bigger vertical hollow cylinder. but what i did it enters into cylinder, and i only want to extrude it on external surface.
View 1 Replies View RelatedMy computer with Windowsxp has AutoCad LT 2005. It's locked up and I can't get to my files. Fortunately, I have most of the AutoCad drawings I created backed up. I'm looking at a new laptop with Windows 8 and will purchase AutoCad LT 2012 or 2013. Question: Will I be able to load the drawings created in 2005 into 2012 AutoCad?
View 3 Replies View RelatedI need to upgrade the autocad 2005 which is coded in LISP to Autocad 2014 using .net and Object ARX 2014.What should be my approach towards it.
View 1 Replies View RelatedUsing AutoCad LT 2005. Having trouble inserting a JPEG into my drawing. I somehow got the jpeg into my drawing, but not it does not show up when I plot.
View 2 Replies View RelatedI got 2011 version about 20 minutes ago - any tips for a hard core 2005 version user? Other that I have to install VBA as it's no longer part of tha package. Settings probably migrated OK.
View 4 Replies View RelatedCan we plot in AutoCad 2005 All Layout Tabs.
I know we can do it in AutoCad 2004.
My laptop crashed with 2005 but I still have the disks with my drawings stored in them. The 2005 is so old it won't load onto Win7 in my new laptop. But I do have a friend who has 2009. Can I still access my drawings.
View 9 Replies View Relatedmy app permits to the users select multiple DWG files, inserting them into a MSHFLEXGRID.
After this the user can select a DWT file and store in a matrix (PC) all its AcadPlotConfigurations.
The user can select distinct Page Layout for each DWG file selected.
Then running the code below, each file is opened in ACAD and then printed using the specific Page Layout.
This was running very good in ACAD 2002. After migrate to ACAD 2005 only the first file is printed. The others DWG files return FALSE to the PlotToDevice command.
Is it missing some command ?Does ACAD 2005 need anything extra to run ?
Obs: the DWT Page Layouts were created for MODELs and the files to be printed are using only the model space too.
'################################
' PLOT SAMPLE
'################################
Dim PC() As AcadPlotConfiguration
Private Sub Plot_Click()
Dim Layout As AcadLayout
Dim LayoutBase As AcadLayout
Dim indice As Integer
Dim retorno As Boolean
[code].....
Drawing created in AutoCAD LT 2005 - in AutoCAD LT 2013, several layers are not present. Tuned off all filtering, etc. Noted that some blocks will not appear in layouts even though the layer they are on is not frozen in the layout.
Not clear why layers in LT 2005 will not show in LT 2013 I attached offending file.I am self-taught and LT 2013 is a little daunting for me.
Forgot to mention that layer AX-COL-SYMB-2 does not show up in LT 2013. Also, block for column line symbols (circle/column numbers) will not show in layouts in LT 2013, but will in LT 2005.
This morning I opened AutoCad LT 2005 and was going to print a map with multiple layers. Everytime I tried to open the layers tool AutoCad LT 2005 would lock up. I would go to the task manager and it showed that it was still running but I could not do anything in the program. I closed Autocad LT from the task manager and opened up a blank document and tried to view layers and it locked up once again. I re-installed AutoCad LT 2005 from original disk and still I have the same behavior.
View 8 Replies View RelatedAny checkerboard hatch pattern that'll work in LT2005 ?
View 9 Replies View RelatedI have drawn several shapes including simple ones like rectangles with the corners filleted to 2" radii and ones shaped like a jelly bean using a combination of polylines, straightlines and arcs.
In my ACAD LT 2005 files, the arcs, fillets and polylines all appear very smooth (I set the display setting to 10,000) after I saw that the arcs had noticeable facets (like a diamond) when zoomed in.
My problem is that when I send these DXF files to my CNC router technician and he imports them into his program (EnRoute V.5). All of those arcs, fillets, and polylines still have those facets in them and do not appear smooth. When we actually cut plywood from these files, the pieces are in fact choppy.
My question- besides the display settings, is there a setting that I can change that will increase the number of control points that make up these curves that would smooth these facets out?
I've been running ADT 2005 successfully on windows XP Pro for a year, but suddenly after running the backup program in windows XP, I effectively cannot startup and run AutoCAD for all the "Resource Manager Errors".
Checking the Autodesk knowledge base, the problem is recognized, but the solution does not appear to be available to me. Here is what Autodesk has to say:
Startup error: Cannot load resource only dll
Published date: 2004-10-21
ID: TS100289
Applies to:
Autodesk Architectural Desktop 2005
Issue
When you attempt to launch a session of Autodesk Architectural Desktop 2005, the following error message is displayed:
Cannot load resource only dll
Solution: This error message typically occurs on systems running a backup software, such as Backup Software Verita 9.1. This software runs a remote agent that causes a conflict with the loading of ARX and DLL files associated with Autodesk Architectural Desktop 2005. In these instances, disabling the remote agent will restore the ability to launch and utilize Autodesk Architectural Desktop 2005.
*[back to me] - I've searched for the aformentioned "remote agent" on my system, but to no avail. Meanwhile, I cannot run ADT as it asks for missing files at startup and at every command.
I'm using version 2009, but I need to save down to 2005. When I open the drawing in version 2005, my text is not appearing in the right location.
View 3 Replies View RelatedHow, or is it possible to make AutoCAD Lt 2005 work with Windows 7 Home Addition?
View 2 Replies View RelatedIs there any other way to import MDT 2005 models to Inventor 2013 with having MDT 2005 platform loaded.
If not, where might I find MDT 2005. I have looked everywhere and it seems to be non existant. It would be alot faster than rebuilding anew in inventor and engineers hate to redo something alredy done correctly.
I need the LT 2005 (with LISP tool box) to run some automation LISP file, which required to input some Japanese remarks in the drawing.
However, the "Japanese remarks" becomes garbled text whenever i enter it in the command lines.
I'm trying to bring a lsp routine up to date and it's almost as if I'm a newbie again. A dialog image worked okay in 2005 but in version 2012 displays poorly. So I made a new slide in 2012 and saved it to the same name as the old one, HobMasterDialog.sld, and placed it in the same folder as the old one. However, when the dialog appears the rectangular area for the image is blank.
What am I forgetting?
This is related to AutoCAD 2005 only:
I have a custom menu file which is NOT located in the support path but rather is on a server drive for all AC 2005 user's to access. When I load this menu in AC 2005 and then restart, it is gone and has to be reloaded. This is happening for all 2005 users in this office. With AC 2009 we use CUI and that custom file is also located on the server, not in the support path, but the 2009 machines are working fine. It is only the AC 2005 users who keep loosing their menu item each morning.
I have done extensive searching on this and it appears to be a common problem but the thing which is also common to all the posts and articles I read on it is that none of them offer a resolution which actually works.
I made a web site with PShop and GOLive back in 2002-2005, I do not have PShop or GOLive anymore, but i wish to edit the path address of those HTML pages generated by PShop and GOLive in 2002-2005, all i have is PS Elements10 and it does not recognize them, and none of my other programs will open the HTML pages so that I can edit them .
View 1 Replies View RelatedI need to emboss ( cut in ) some grooves into a cylinder, but in such a way, so that they won't get narrower. What do you think would be the best way to do that?
View 2 Replies View RelatedI have made a sheet metal cylinder with a rip. I am trying to create a seam on this rip as is done in [URL] ....... about half way through.
I have tried to go through the same steps, but I can not select the inside of the rip to built hems and flanges on. I also tried to make the cylinder by sketching 350 degrees of the cylinder instead of creating a rip, This had the same problem.
Why I can't select these edges or how I can work around it?
How can I create a rib that touches a plane and the end of a cylinder? Inventor will not do it since the thickness of the rib does not touch the cylinder (see attachment).
View 8 Replies View RelatedI am having trouble extruding(cutting) a shape into a cylinder. I want to cut the cylinder with a certain shape but I want to cut it tangent to the cylinder instead of just straight down through it like a front view.
View 4 Replies View RelatedI am trying to make a exaust pipe for a semi i am making in autocad 2006 and the pipe bends at the top. so i was wondering how can i bend a 3d cylinder/pipe?
View 9 Replies View RelatedI have a tube modeled in AutoCAD that is 1.5" OD and 1.25" ID. Along with it, I have a piece of flat 2D geometry representing a pattern to be cut into it.
Is there a way to either wrap the geometry around the tube and extrude out the shapes, or a way to extrude the geometry to the correct thickness and wrap it into a 1.5" OD tube?
Looking for a block for a forklift gas cylinder?
View 1 Replies View RelatedI drew a cylinder and now I need to delete its top and bottom. How can I do that?
I used Draw - 3D Modeling - Meshes - Primitives - Cylinder to create the object. And after that I'm lost, because most of the tutorials online are for Windows based CAD, but I can't find same commands on my Mac.
Im just starting to get my head around VBA in AutoCad. I have managed to write a code that creates a 2D truss in polylines by coordinates I have arranged in an Excel file. Now I need to extrude each member into a cylinder. Well Im not really that smart yet, having some hard time with choosing path and region.
View 9 Replies View Related