It involves right clicking on an object in Corel Draw X6. I had this same issue in X5 too.
My issue is that if I select an object and then right click on that object (I right click on the "X" in the middle of the selected object) it will select the object below the "X." In other words, I can only ever get the right click menu to appear on the object I select if there are no objects below it.
I'd assumed it would be "Press Shortcut Key and tap mouse" or something like that... but it's not.
It seems the Command Key changes the mode of the selection tool, whilst partially, sometimes, enabling selecting underneath. But it's terribly inconsistent, and means that the selection mode is changed if I do manage to select the desired object. Is this how it works?
I need to place an image underneath skin and I was wondering how to do this effectively rather than just placing the image above the picture and blending the layers. The image is off a cartoon eye that will glow different colours and I am trying to blend it into an open palm. Kind of a mix between David Blaines eye tattoo, and the clocks from the film In Time
View 9 Replies View RelatedFor some reason, when I try to create a transparent object with a low opacity material, the object underneath it seems blurred out as if the texture res of the inside object is very low. once I hide the transparent object it returns to normal.
Unfortunately it also looks like that when saving an image.
I tried playing around with the material and with the preferences of Mudbox but couldn't find a solution.
For as long as I can remember, across all versions of Autocad, I've had problems picking the right item on the popup menu for object snap (shift-right click). It frequently picks the item below the intended one, i.e. it will pick Parallel rather than Perpendicular. Trying a second time works every time. This problem has been so consistent that I don't believe it is user error. The item is highlighted, after all. There is no way I'm repeatedly missing it. Is it possible to calibrate the mouse in Autocad?
View 9 Replies View RelatedResizing objects is a mess in CorelDRAW X6 when objects are outlined with Scale With Object enabled to retain proportions after resizing.
None of the tools dealing with outlines (e.g. Contour or even Outline itself) continue to work properly after resizing the object.
I strongly suggest to recalculate outline property values after resizing if Scale With Object is checked. Don't just do it hidden somewhere internally in the object model by applying a temporary scaling factor. Instead actually recalculate the actual property values if Scale With Object is checked.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies View RelatedIs there a way to exclude single attributes from being defined in a object style? As example: i want to define an outline that does not change width of the objects, but everything else.
There is a small tick box right of every attribute with help text "None this object attribute is not defined by a custom style" but i can not mark it. My feeling is, that i need to switch on this tick box to get the result i need, but i can not. When i click on it, it just gives me a greyed out "Revert". When i try to make child styles, there is a way to break the connection to parent style with these tick boxes, but no luck.
Is it a bug? I tried it with X6, X6.1 and X6.2
4621.CorelDRAW Clone Bug.mp4
Trim the master object and the cloned object gets deleted.The master object cannot be directly trimmed, so I grouped it with another object, which seems to enable the shaping tools. check if this behavior exists in X5 also.
I have inserted a clip about the problem. Maybe other users and the Corel staff will check it out.
Occassionally the object properties in my object manager will dissappear and I am unable to bring them back. I have tried toggling all the buttons on the manager, restarting corel, resetting corel to it's default settings and restarting my computer but nothing will bring back the properties. It does not happen on every single file but it happens often enough to be a pain. I have attached a picture of what the object manager looks like.
View 6 Replies View RelatedThere is problem with my CorelDRAW X6.
After I import different files in my working file, it's getting hard to work- RAM(16GB) is getting completely full and its almost unworkable!
I checked out Object Manager and found stack with "SVG data" and "Locked SVG data" object there under some basic shapes.
Stack is about from 10000 to 100000... Some times even more, but its not possible to select all them because Corel just stops. What is that- "SVG data" and "Locked SVG data" object and why they are so many there?
how to create an icon.
The problem is I can't click to transform just like him... how he does that ? All he did was select a corner and click outside the object.. the object will be transformed
how to transform by dragging the four corner,
When I double click an object in Xara Pro X sometimes it opens the object in a new file.
I say sometimes because it doesn't do it under all circumstances. I think it is just on some cloned objects. I normally use double click on an object as a shortcut to the shape tool (used to be called shape editor tool). Even though it only does it on some objects, when it decides to do this it is consistent for that object.
Using acad 2010
I insert xref, it is possible to click on underlay object and have it transferred to the host working space?
I need to find a way to cut the shape of one object out of another object. In the above photo I need to be able to print the black crosses without the printer printing the white ink under them (you can see where the black ink is not adhering to the white ink very well).
View 11 Replies View Relatedhow you can trim an object to the shape of the object on top?
View 9 Replies View RelatedHaving just installed AutoCadArchitecture 2013 last week, I've been fairly successful in fixing most of my "issues".
When I dbl. click on a line, polyline, etc, I have it set up to open the Properties Pallet, (not the quick properties box). Problem is, the first time I dbl.click on a no object it opens the Properties pallet no problem, but the second time i dbl click an object, the properties pallet completely disappears from the screen. When I dbl click the object a 3rd time, the pallet comes back. I have it set to auto-hide, but not disappear. How do I get to use the dbl. click feature to open the properties pallet every time?
is there a way to stop ribbon from changing all those icons whenever you clicking on an object? because my computer at work is a bit slow and each click like that on a large civil 3d profile has a slight delay which that time adds up to reduced productivities. and i am clicking 500 times a day since there are 500 vertices to modifiy on say this alignment.
everytime you click on an object the ribbon changes which takes up cpu time due to running a bunch of codes to populate the icons on the ribbon. tried closing ribbon doesn't work still have the delay when mouse click on an object to show the grips. oh well maybe it's showing the grip that's using the cpu. but how can you say for sure without turning one feature off at a time to test?
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
1. find the attached “Rays on Oval.png” file. (Tried attaching .cdr file but the File Size is 400KB.)
2. I would like to Repeat / Duplicate that Black Color on Outer Path of Oval Shape. (Like shown in the Yellow versus Black. The Yellow is a Circle and the Black is from Star Tool)
3. I think the Best Bet would be to Link the Rays to the Outer Path of Oval Shape.
4. I need the Rays and Oval as 2 Different Objects so that I could Change the Color Scheme.
I'm want to drag an objects anchor and have the position co-ordinates offset by opposite amounts so it doesn't appear to move postioin on screen. IS there a tool for that?
View 3 Replies View Related1. After creating a clip mask can I view it without the actual object also being visible?
2. Can I paste one object into the clip mask of a different object?
can I snap an object/vertex/edge to another object straight in one axis?
I'm coming from Rhino 3d, where this is possible by holding the shift key.
3ds Max 2012 SP2
i7 2600
16GB RAM
Geforce 560ti OC
I have simple a 3D bottle shape created from about 16 points and I am trying to map a gif image on to it usning CS5. No matter what I have done (work from a new document, etc.) I always get the error message. I also receive this error when I attempt to map a jpg image on to the same shape. I have attempted this on three different Windows 7 machines running CS5 with the same result. When I try it with CS6 the program closes with a catastrophic error and no message. I do not receive this error using the default symbols. The gif and jpg images are imported and imbedded into the document and then moved to the symbols library.
View 6 Replies View RelatedI have a rather simple 3rd party custom object... I tried to get its bounding box but the coordinates that come back don't seem to relate at all to the object.
What I'd like are the coordinates of two nodes the object contains...
Is it possible to apply the autocad cursor in some why with the node object snap to get their coordinates?
I am having some trouble with a file in Illustrator CS6. Within a layer, when I add a fill to an object, the fill doesn't block out the object paths beneath. For instance, say I have a square object overlapping a circle object in Layer 1. The square object is above the circle in the layer. When I add a fill to the square, the circle stroke still shows through the square even though the overlapped part should be blocked out by the fill. The square is set to normal visibility, and I have made sure that there are no duplicate paths that would account for what I am seeing. (I.e., it's not a case where there's a second identical circle path that is on top of the square, so that it remains visible in spite of the fill.)
Other details:
- I'm mainly working with a white fill, but the problem is the same with fills of any color
- When there's a fill color in the circle path as well, the circle's fill color *is* blocked out—just not its stroke.
- I have restarted Illustrator and restarted my computer and these have not changed anything.
- There are other layers within the same document where the normal layering rules work.
- I tried copy/pasting some of the problem objects into a new document, and in the new document, the fill works properly.
- If I move the problem objects to another layer, then the fill works as it should. But as I'm dealing with a number of paths, it doesn't make sense to create a layer for each to solve the problem.
I can't tell if it's a matter of working in too large or complex a file.
Since i updated PS (CS6) the last time it has this very strange behavior when i try to position a object via the Arrow Keys.When i hit a Button very fast (3 times) the object jumps back to its very first position where i started to move it.
When it is a new "feature" - where can i turn it off?
I have a logo that I am working with and I need to make it a 3D object for what I'm doing in After Effects. I am trying to make it 3D so I can edit it in repousse because all I really need to do is extrude it.
I've tried the different options in the 3D drop down menu but none of them bring me to edit in repousse.
Also, I know that I can make it 3D in After Effects my making multiples of it and what not but I don't want to go about it that way. Also, I'm working with CS5.5 and the 3D renderer plugin in After Effects is only available in CS6.
I've already started using the AutoCad 3D.
how to put a 3D object on top of the another 3D object in autocad"! E.g.,I want to put a 3d object of one leaf (raised 1") on top of the vase, so that the edges of the leaf are placed completely on the surface of the vase.
I extruded the leaf 1" first, then tried to copy it on a solid cylinder of a vase, but it didn't work!!! It seems to be simple, maybe not!
Is it possible to select an object for reading in an XRef?
PS I think it has something to do with Editor.SelectNestedEntity() but it is the end of a long day and I can't fathom it out
When I select an object and pan to make another selection the first object "deselects". The object(s) will stay selected until I pan and as soon as I start to pan the grips go away and the object(s) is deselected.
View 9 Replies View RelatedHow do I keep the fill ON the object that gets selected so I know not to pick it again as move through the drawing?
How /or/ where can I get a listing of my SetVars.
Running the Setvar (?) command doesnt offer a description for each?