Since i updated PS (CS6) the last time it has this very strange behavior when i try to position a object via the Arrow Keys.When i hit a Button very fast (3 times) the object jumps back to its very first position where i started to move it.
When it is a new "feature" - where can i turn it off?
I have been using Corel Draw primarily in my work for more than 20 years but have never taken the time to understand this....nor why on some artwork an object will move fractionally but on other artwork (specifically this time, a 20m x 10m workspace for vehicle signage) the objects move 200 or 300mm!?
I always thought this was a 'drawing precision' setting but even when I set that to 1 decimal place it doesn't seem to affect this.
We upgraded to AutoCAD Mechanical 2012 (from AutoCAD Mechanical 2009).
I used to go: TOOLS > DRAWING ORDER, in order to bring an object to the back or the front of another object.
Now that we are using AM 2012, I can't find where this command is located.
For selecting objects, I must have hit a buttom trying to figure something else out and now I can't select objects without touching them and clicking on them, I used to be able to pick whole sections.
View 6 Replies View RelatedWhen I open draw X5 and a new page, I put an object on that page but it does not tell me where that object is on the page. When I put in a X and Y dimention it will move that much and resets back to zero. Is there a setting some where that I have to change? In X3 it whould tell me where the object is.
View 13 Replies View RelatedI know it is easy to tile objects using the Transformation - positioning and then click on the "relative position" and choose the direction.
But if I want to only shift it half the width to create something that may looks like bricks tiles.
One way to do it is to look up the width and height of the object, bringing up the calculator and divide it with 2 and then enter the result into the positioning manually.
Can we set shortcuts for different positions like alt +f8 for moving the object right relative to its position, alt+f9 for moving the object left relative to its position?
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
whenever I am moving an inverter or module shape around, I always have to either shift those wires or extend them to some extent.
I was wondering, like Google SketchUp, can AutoCAD have a follow extension mechanism for a fix point with an fix object?
I would love so that only one wires extends. So I am just looking at a linear expansion for now. I am not looking for complex 3D expansion... I just want 90° lines to extend:
Capture.PNG
i have recently brought a new computer (very powerful) for the things i want to do, as i am also posting this you can tell i make alot of videos as well.
Here are my computer specs:
intel core i7 quad core 3.70ghz
16gb beast ram 2400mhz
4gb amd radeon r9 290 graphics card
asus SSD writes @ 830mb/rs
At the moment i am exporting a video which is 1hour and 20 minutes long and have manged to get the export time down to 30-40minutes
I have always been trying to figuring out how to get faster exporting times for a long time now, is it dependant on the sequance settings as well?
I'm copying 1 object, multiple times. Yes I know how to multiple copy.
The problem is this.
The object I'm copying will have varying distances between each copy e.g. , 50, 100, 90, 150, 140, 100, 190 so on and so forth.
Is there a way in LT to copy relative to the last object placed?
I am currently building a stadium. Created one chair that I want to duplicate 20'000 times, however Maya is unable to cope with this (even Duplicating Special by 200 is too big for it).What would be the recommended way for these Massive Duplicate Specials ?
View 1 Replies View RelatedC3D 2012 SP2.1 on Win7-64
I have a marker on a cross section that was projected from a short feature line that I created from a 3DPolyline. If I move the cross section (they never come in correctly, right?), the feature line moves too. If I use a 3Dpoly, this doesn't happen. Only went to the feature line because for some reason, when I went to Project Multiple, the 3Dpolys weren't picked up.
Now I wondering if I've moved feature lines on other projects where I have moved the sections. Could be a real problem. Most of those, though, had a mix of feature lines and 3Dpolys, so they would only be partially messed up! Hopefully, I moved the sections before doing the projection.
I'm not able to locate the function that moves the vertices of a object squarely on the zero-line.
Basically I am modeling a half a head and using symmetry mod for the other half. I just want a clean half model with all the verts line up at the mid-line.
Win7 Pro 64bit
I7 3680 6 core 12MB cache w Corsair H80 liquid cooling
ASUS P9X79
32 GB DDR3
NVidia Quadro 5000
3TB WD
I've relaunched and tried re-installing Illustrator CC twice and didn't solve this unexpected crash problem. It has never happened since I paid for this software months ago.
Illustrator won't crash when:
- using the keyboard arrows to manually move any path or drawn shapes/ objects
- using my wireless mouse to draw objects/ new paths from clipboards, colour boards etc.
Illustrator CRASHES when:
- using my wireless mouse and macbook's touchpad mouse to move any new or old drawn paths/ objects/ shapes/ lines etc.
In my Opinion - ROOT OF PROBLEM:
- Wirelss and macbook's touchpad mouse cursor causees it to hang then crash 1 minute later.
Why would my mouse cursor suddenly be the cause of this crash problem when it was working fine all along?
Below is the error message, I use this software to run my design business.
Process: Adobe Illustrator [18899]
Path: /Applications/Adobe Illustrator CC/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Identifier: com.adobe.illustrator
Version: 17.1.0 (17.0.0)
Code Type: X86-64 (Native)
Parent Process: launchd [122]
User ID: 501
[Code] ....
know if there is a tool like "Ofset" in AutoCAD for Adobe illustrator CS6? I need to repeat an object(let say a Rectangle) 100 times with a distance of 1 cm. I already find the "Transform Effect" function from Effect --> Distort & Transform but this function create a None- Editable copy of the selected object. What I need intact is a independent object which can be edited in future!
View 2 Replies View RelatedSo, when I reset the transforms of an object, it moves the geometry back to the frozen position but the pivot point gets places at the world origin.
That can't possibly be what is supposed to happen, is it?
Trying to find out how to copy an object multiple times in a curve. I've used microstation and it does it easily and just wandering is AC has the same type funtion without going throught 6-8 steps for each copy.
View 9 Replies View RelatedIn 3dsmax I want to:
(1)Open a .txt file containing some data:
E.g.
0,0,10,90,45
0,0,20,180,45
0,0,30,270,45
(2)Create arrow object at the XYZ coordinates pointing in the direction of the Heading Pitch values.
I'm an absolute beginner, and cannot find a simple pointer in GIMP. By simple pointer I mean an arrow to select an object, similar to the pointer in Inkscape. What am I missing?
View 7 Replies View RelatedI need to rotate a layer to an exact spot relative to another layer.
Moving it right and left with the arrow keys lets me see when I snaps
into register.
I also want to do that with rotation.
I'm trying to create a model of arrow with which I could place in drawing in any length and orientation I want with lisp. I was imaging to place two point on this arrow and by placing the two points on my drawing, the length and orientation of the arrow would be define.
I'm trying for hours to create it and my grip for polar stretching don't stay still on my arrow (suppose to be on the peak but go far if I stretch it).
I have a full spherical panorama image in a psb format that I converted into a 3D spherical map in order to cleanup, clone a little and add nadir art. All good there but can't figure out how you get the 3D object back into the full flattened psb format rather than just exporting/saving the view the 3D camera is looking at?
View 1 Replies View RelatedAccelerator Keys
My accelerator keys for the right-click object-snap cursor menu do not work. For example, I will be drawing a line and I will bring up the object-snap menu, then I will select ‘E’ for endpoint snap, the ‘e’ will display in the dynamic input window and the snap does not work.
Recently purchased a new computer with 64 bit system 4meg ram. I installed CS2 and everything seems to be working except the arrow keys and the control +/- features. Arrow keys are working in other programs like word and publisher.
View 31 Replies View RelatedI purchased Adobe Photoshop CS2 for Windows XP and installed it on my work PC and my home PC.
Everything works fine and dandy on my work PC, however when I try to do some editting on my home PC there are some quirks that I can't figure out.
The main thing is that my Up/Down Arrow Keys do absolutely nothing.
Whether I am trying to edit text and scroll through my fonts or if I'm trying to nudge a part of a picture, the Arrow keys do nothing.
I changed something, the back of faces does not render in the viewport and I also cant select the back of faces. Also even with a two sided material the back of faces is not lit.
View 3 Replies View RelatedOk so im working on a project
An animated email signature where an image of an arrow moves from the left to the right of the screen - easily done with a few frames and animation in gimp the arrow needs to move behind a paragraph of text which has the persons name, work address, email and phone numbers.
So the question remains is it possible to have one fixed frame (persons contact details) in a project of say 20 frames (which make the moving arrow behind the text)?? AND can
I'm on a Mac Pro, quad core, 9 GB memory. I have been using CS5 for all my photo work and use Bridge and ACR to do all of my editing. I have set up two monitors with content on the right screen as thumbnails and preview (and other tabs) on the left screen. To do my edits I use the right/left arrow keys to scroll through the images (and then make my picks/ratings) as I go.
I just installed CS6 Demo and am trying to do the same thing...everything else works normally but the right/left arrow keys (moving from image to image) now takes 4 to 5 seconds to bring up the image (CS5 was instant).All paramaters/settings/preferences are the same. I know CS6 needs a more powerful video card (mine is only 256 mb...I will be upgrading soon)...but here's the weird thing which leads me to believe that's not the problem...the up and down arrow keys work normally, i.e. they go from image to image instantly. I edit folders of images that range from 200 to 300, up to 1500 images from a shoot on a daily basis so I need this to work for me!
Also, I'm having problems trying to run a batch in CS6, I set up an action identical to what I had running in CS5 (embedding a text logo on an image) and while it goes through the process of doing the action, at the end it pops up an error message and lists all the images saying it could not process the request. Weird or what?
Sometimes it works. Lately it rarely does. I have tried holding the command key and this does nothing. Why can I not move objects anymore.
View 3 Replies View RelatedI have used v2006 til recently. Now I use LT 2010. I just use multileaders for arrows. I am starting at the arrow head, and I want the tail to end on the "endpoint" of a line. When I "right click" to finish the command, the tail of the arrow "jumps off" the endpoint or nearest or whatever snap point I use. I have looked in the settings and turned all the text & landings off & set break size to zero.
View 2 Replies View RelatedWhen using the standard type tool, periodically, the keyboard arrow keys will not work. You can manually change your selection point, but not by using the left of right arrow.
View 8 Replies View Related
