AutoCAD Visual LISP / AutoLISP :: Creating (arrow) Block With Two Points For Positioning And Orientation
Jul 13, 2013
I'm trying to create a model of arrow with which I could place in drawing in any length and orientation I want with lisp. I was imaging to place two point on this arrow and by placing the two points on my drawing, the length and orientation of the arrow would be define.
I'm trying for hours to create it and my grip for polar stretching don't stay still on my arrow (suppose to be on the peak but go far if I stretch it).
View 9 Replies
ADVERTISEMENT
Feb 10, 2012
I'm trying to change a routine i just wrote that draws 3d pipes. I wanted to make it so that when a user selects the beginning point and ending point of the pipe, the LISP changes the ucs to that vector, draws the circle at the beginning point and extrudes it to the second point.
It actually works great except when the ucs changes, so do my user points because of teh origin change. Is there a better way I might get this to do what I wnat it to?
(setq ip (getpoint "
Pick First Point:"))(setq ep (getpoint "
Pick Second Point:"))(command ".ucs" "za" ip ep)(setvar "osmode" 0)(command ".circle" ip "d" od)(command ".extrude" (entlast) "" (distance ip ep))(command ".ucs" "w")(setvar "osmode" oldsnap))
View 2 Replies
View Related
Jun 28, 2013
I got this code in a web trawl to insert a block to points taken from a txt file......
its coming back with an error as follows:
; === Top statistic:
; Function definition (with number of arguments): ((C:INSERTBLOCKS . 0))
; Check done.
What does this mean and how can I fix it.
(defun c:insertBlocks (/ txtFile xyData expertVar attreqVar)(setq expertVar (getvar "expert"))
(setq attreqVar (getvar "attreq"))
(setvar "expert" 2)(setvar "attreq" 0)
(setq txtFile (open "c:\cad\textfile.txt" "r")) ;
[Code] ......
View 3 Replies
View Related
May 13, 2013
I am trying to write a program to align a block with two selected destination points.
- first the user is prompted to select a lwpolyline of a block entity
- then he is prompted to pick two destination points
I face problem with the sub-routine SegmentPts. It is supposed to return the coordinates of two vertexes on both sides of the picked point on a lwpolyline using entsel. But here in my program, when i am picking a point using entsel on a lwpolyline inside a block entity, it is not returning the two vertexes on both sides of the picked point. In stead, it returns some other points of the selected LWPOLYLINE. Why it is doing so? Where is the problem in my program?
It works fine with my other programs where i pick on a LWPOLYLINE entity. In this particular case, the LWPOLYLINE is inside a Block entity and the program is not returning correct points.
Please check Lisp Program below:
(defun C:alb()
(setq ent1 (entsel "
Pick on one side of LWLINE ofa Block:" ))
(setq ent (nentselp (cadr ent1)))
[code]........
View 9 Replies
View Related
Sep 19, 2012
I am trying to insert a norht block oriented on two selected points with the following
(defun c:North ( / ss )
;Orientate North Symbol
(setq oldos (getvar "osmode"))
(setq blk (vlax-ename->vla-object (car (entsel "
[Code] .......
I am not sure how to (a) erase the selected north block, then (b) make the insert north block in its place bit work.
View 6 Replies
View Related
Nov 30, 2010
I have a dynamic block that I would like to insert via a lisp routine. When the routine is run from my menu I would like to select two points on the drawing area. Then I would like my dynamic block to be inserted at one of the points I selected and then I would like a specific "point" of my block to be stretched to the other point that I selected. I was wondering if this is possible with LISP? I have my old LISP program I wrote that draws a leader and then inserts my block but that was before I started working with dynamic blocks.
Here is my current
(defun c:wldsym()
(setq osnapold (getvar "osmode"))
(setq orthold (getvar "orthomode"))
(setq dimsc (getvar "dimscale"))
[code]...........
wld1r.dwg is my current block. It has some dynamic properties already. But I'm trying to add new properties that can be seen in my working test drawing wld1r-new.dwg
When using my code with "wld1r.dwg" you can see how everything behaves right now. Then open "wld1r-new.dwg" and note that the insertion point and a stretch point my default are in the same spot. Work with the two stretch points and look at how the block reacts.
View 9 Replies
View Related
Oct 24, 2012
I've been fighting with building a formula in a block utilizing a field from another block. I have a support steel member that once placed, will be lengthened. I need a distance from center of the pipe to the top of concrete. I created a block with a field referencing the insertion point (center of pipe) it works fine giving me this elevation. I also have another block that is the datum node. I have several fields in this block, and it is located at the bottom of the support steel plate. I am trying to create a field that takes the center of pipe elevation and subtracts the datum node elevation to get a distance. I created the formula referencing the COP elevation field and the elevation of the datum node. The information shows properly where I am building the formula, when I click evaluate, the Preview gives me ##### and when I create the datum node block that is also the output I get. I can't figure out why it won't give me the difference between the two elevation fields. I don't know what I can do differently to have that information in the datum node.
View 1 Replies
View Related
Feb 21, 2013
I want to change the arrow size in AutoCAD mechanical using Visual Lisp. (No other language is allowed by the company).
I have the code in VBA but I have not been able to generate equivalent Vlisp code.
The code fails at the following line saying "; error: Automation Error. Problem in loading application".
Importing the library does not make any difference (but I think it is not necessary).
(vl-load-com)
(setq symBB (vlax-invoke-method (vlax-get-acad-object) 'getInterfaceObject "SymBBAuto.McadSymbolBBMgr")))
From there, I have to get the BomMgr and so on. But I am unable to take the first step itself.
View 4 Replies
View Related
Nov 17, 2009
I have some working code that sets the Text Style name to ROMANS inside my Mleader Style called ARROW. Here it is:
(setq dict (dictsearch (namedobjdict) "ACAD_MLEADERSTYLE") ; start setq q
dict1 (member (cons 3 "Arrow") dict) ; code 3 is Mleader Style Description
el1 (entget (cdr (assoc 350 dict1))) ; code 350 is dictionary entity handle
er (tblobjname "style" "Romans") ; new value for MLEADER Text Style
) ; end set
(entmod (subst (cons 342 er) (assoc 342 el1) el1)) ; code 342 is MmTextStyleId - write new vale to mTextStyleId
I want to modify this code so that it sets the Arrow Head Size to a specific value, say 0.125. Having a tough time figuring out the DXF codes and tblobjname to do this.
View 1 Replies
View Related
Jan 5, 2012
I have a drawing that has 2D pipeline (only x and y, z value =0) and 3 topo contour lines ( with x, y and z vaules). I need to divide the the 2D pipeline into say 2000 points and then get the corresponding z values from the topo contour lines. I think it can be done by interpolating between the z values for the two apparent intersection points of the 2D line and the contour lines, the x and y values will be the same for the points that falls between these two aparent intersections. Is there any lisp out there that can do that.
View 7 Replies
View Related
Oct 3, 2013
I get an AutoCAD drawing from my conveyor manufacturer who have buried a block (tagname) in all of their conveyor blocks.
The only way to remove them is to manually use BEDIT and erase the tagname block.
Is there a way through Autolisp to search all blocks in a drawings and if the tagname block is part of the definition of the conveyor block, erase the tagname block or redefine the conveyor block without the tagname block.
View 8 Replies
View Related
Mar 8, 2013
When dynamic blocks are inserted they're assigned an anonymous block name. I'd like to be able to retrieve the name of the parent block after selecting the block on screen using AutoLisp.
Need a bit of code that handles this?
View 3 Replies
View Related
Apr 5, 2013
Create a routine that looks for a block based on a portion of that block name, using a specified path or search path.
For example, block to search for is BLOCKABC123, so if someone inputs ABC or 123 as a block name, it will locate that block within that folder and inserts it into the drawing at a user specified location.
Ideally, if there is a check in that if it finds more than one match, then perhaps it flags or prompts you to choose 1, 2, or 3 option which block to use. But I can live without this special function if it requires too much time to code.
View 8 Replies
View Related
Feb 12, 2012
I need to match few attribute values from one block to different block. I download a lisp file called; ca.lsp which can match the single attribute value. I modified it for more than one attribute value matching. It is ok but still wish to overcome two issues for batch prcess
1. picking up the blocks by selection
2. click the alternative block numbers of times to match the numbers of attribute values I needed.
How to modify this lisp I can run it by block name selections instead of picking selection which enable me to run batch process for numbers of drawing? That will be good...
Lisp & Demo file attached (Match attribute value, A, B & C to Attribute 1, 2 & 3).
View 3 Replies
View Related
Apr 18, 2013
I am learning autolips and i found a problem that i can´t solved.
(vl-load-com)(defun c:pmb ( / ss ent pt )(prompt "
selec block : ")(setq ss (ssget '((0 . "INSERT")))) (setq ent (ssname ss 0)), (setq pt (cdr (assoc 10 (entget ent)))) (command "point" pt))
wich this code you select one block and insert one point at insert point´s block.
which this other code yo select all block and insert all point.... but in one block
(vl-load-com) (defun c:pmb11 ( / sele cod bloque nbloque lista pt ) (prompt "
block: ") (setq sele (ssget ( List'(0 . "INSERT"))) Cod 0 )cod (1+ cod) (repeat (sslength sele) (setq bloque (ssname sele cod)) (setq pt (cdr (assoc 10 ( entget bloque)))) (command "punto" pt) );repeat )
View 4 Replies
View Related
Nov 30, 2012
I have a block that i want to insert several times and revised each one to be different to do this i would have to insert it and rename the blocks that come in and then reinsert i would like to insert and have a lisp explode the main block and rename the other 2 blocks with a suffix at the end depending on how many times its in the drawing... can this even be done? My original block name that will be first inserted is "BENT PULLEY NOTES" it needs to explode after i drop it in and then there are 2 blocks within that called "Bent Pulley" and "Bent Pulley DYN" that i was hoping to keep the names but add a number at the end depending on how many are in the drawing already...
here is a lisp that i have found... it would work if i didn't have nested blocks and only wanted the one block to be insert and not explode...
(defun c:Test (/ e i name Bname )
(setq e nil)
(command "_.-insert" "Drawing1.dwg" pause "" "" "")
(if (setq e (entlast))
[Code] .......
View 9 Replies
View Related
Dec 23, 2013
I have a dwg with 40 blocks that have a non-annotative property. I can go through 1 by 1 and change the property to annotative and redefine the block. Is it possible to automate this? I have done some google searches but have not found anything I am able to cut and paste or put together to get it to work.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 3 Replies
View Related
Feb 2, 2012
I need to place a circle, of a user-defined radius, as a marker at the endpoints of all lines in a drawing. how to accomplish this using lisp? It doesn't matter if they overlap; I can use OVERKILL to delete those objects.
I started the code with:
(defun c:cmark ()
(setq crad (getdist "
Specify radius: "))
)
But don't know how to cycle through the objects, determine the end points of lines only.
View 6 Replies
View Related
Dec 19, 2011
What I have is a topo plan in 3D (All contour lines have x, y and z values). My pipeline is on x and y coordinate only. I need to get the corresponding z value for say about 2000 points on the pipeline.
View 9 Replies
View Related
Nov 6, 2013
I need very very often to know the angle between two surfaces to write cnc programms...At the moment i draw allways two lines normal to the line between the two surfaces an use then the angle measuring tool.Works good, faster then bks and dimensioning, but need also time and always need to delete the lines after...
Is it possible to get a lisp which ask für 1 point on the first surface, 1 point on the other surface and two points on the line between the 2 surfaces? So the lisp know 3 points of each surface and can give out the angle between... Should be allways between 0-180°
So it needs only 4 klicks to get a angle! That would be so great! Is there a lisp programmer who can make this possible?
View 9 Replies
View Related
Aug 19, 2013
how to use AutoLISP to draw lines between two points. I have x,y,z coordinates for the end points in an excel sheet which I can save as a text file. I need to pull the coordinates from the file and use them to draw the lines. There are 2000+ lines so it is not feasible to draw them manually.
View 8 Replies
View Related
Nov 1, 2011
Looking to make a selection set of points that are on a specific layer, and then create a dimension between, in this case, two points. I feel like it should be very simple, but I can't get it to work for the life of me. Here is the test code I've been playing around with:
(defun c:test (/ sel1 TC)
(setq sel1 (ssget "X" '((8 . "VPOINTS"))))
(setq TC (polar (entget (assoc 10 (ssname sel1 0))) (dtr 180.0) 9))
(command "DIMLINEAR" (entget (assoc 10 (ssname sel1 0))) (entget (assoc 10 (ssname sel1 1))) "V" (polar TC (dtr 180.0) 9) "")
[code].......
View 1 Replies
View Related
Jul 7, 2013
I have plines of circuits that sometimes have T's (line goes along, then T's out then back to T point and then continues).
Here is example line -
(setq List_Pline (list (list 0 0) (list 1 1) (list 0.5 1.5) (list 1 1) (list 2 2) (list 3 3) (list 3.5 2.5) (list 3 3) (list 4 4)))
nth 0 = (0 0)
nth 1 = (1 1) - T point
nth 2 = (0.5 1.5)
nth 3 = (1 1) - T return point
nth 4 = (2 2)
nth 5 = (3 3) - T point
nth 6 = (3.5 2.5)
nth 7 = (3 3) - T return point
nth 8 = (4 4)
I need to be able to pick 2 points along the line and find the shortest route.
Examples -
1st point at 1,1 and 2nd point at 3,3 - new line is nth's 3,4,5
1st point at 0,0 and 2nd point at 1,1 - new line is nth's 0,1
1st point at 2,2 and 2nd point at 3,3 - new line is nth's 4,5
1st point at 3,3 and 2nd point at 4,4 - new line is nth's 7,8
1st point at 0,0 and 2nd point at 3,3 - new line is nth's 0,1,2,3,4,5
1st point is 1,1 and 2nd point is 1,1 - new line is nth's 1,2,3
I've tried using vlax-curve-getParamAtPoint, but it returns 1st T point.
Synopsis of program -
Select Pline
Pick 1st point
check if on line
Pick 2nd point
check if on line
check if 2nd point is before 1st point, if so swap locations
find last nth of 1st point
find 1st nth of 2nd point
return list
View 6 Replies
View Related
Aug 23, 2013
I am trying to get the end points of an invisible line it would be the line that you offset I know all about polar I just don't know which angle to add or subtract and I will pick the point on the side I want it to be on I am going to pick 2 lines and I want them to offset invisible lines in the middle the lines are not parallel.
View 8 Replies
View Related
Aug 20, 2012
We have a need to select a tangent line/polyline etc and then select two other points we would then like to have the program draw an arc through the two points and yet still be tangent to the initial line/polyline that we picked. We don't care what the radius is as we believe there is only one solution anyway. It would be wonderful if we could just use the Arc command and select start>Second Point> then just use the Tangent Osnap but I guess that is out of the question :-)
The only code that I have come across that even resembles this only allows for one point not two (STILL VERY HANDY AND VERY SLICK)
(vl-load-com)
(defun near_vertex_arr (obj / dxf_obj e_next obj_vlax pt_sel par pt_first pt_snd i bulge)
;bruno.valsecchi
[Code]....
How does everyone else hande this? By they way... I dont care what language it is written in :-)
View 7 Replies
View Related
Aug 8, 2013
I know how to increment pick points numerically (see below). How is it done alphabetically?
(defun C:test (/ pt# pt) (setq pt# (getint "
Enter number: ")) (while (setq pt (getpoint "
Specify point: " ))(if (/= pt nil) (progn (command "TEXT" "M" pt "" "" pt#) (setq pt# (1+ pt#)) ) ) ) (princ))
View 3 Replies
View Related
Mar 12, 2013
I am using autocad 2013 and importing PDFs into the drawing and recently the OSnap points within the pdf are missing. The PDFs are of floorplans and I was able to measure from wall to wall using endpoints and midpoints. Now I am only able to select the endpoints on the frame of the pdf.
Is there a switch that might have been turned off?
View 2 Replies
View Related
Aug 5, 2013
I am looking for code to remove duplicate points (xy coords) from a list with a fuzz factor parameter.
View 1 Replies
View Related
Jun 29, 2013
My first lisp, so bring it hard on me I want to be an expert in autolisp .
My lisp is meant to do the following:
draw a rectangle with ”0” fillet. It can be done either via rectangle command, or pline command. The attached lisp has the variant with the pline-case.
The, I need to draw inside a smaller rectangle, with a fillet value, that is promoted and indicated by the user. The smaller rectangle must be centered inside the bigger one. I thought it was a good idea, to take one insertion-point for the bigger rectangle.
and to calculate a 2-nd insertion-point for the smaller rectangle, via "polar" function.
What I get:
the 2-nd insertion point is put the same as the 1-st one.
I wish to draw the bigger rectangle with one layer "example: Layer 1", and the smaller rectangle with another layer "example: Layer 2".
View 9 Replies
View Related
Apr 4, 2012
I am working on a little lisp routine to draw splines, but can't get it working. The basic idea is that i first select a set of points that i can feed to my spline command.
(defun c:test2 () (setq pt (getpoint "
define point:")) (setq ptlist nil) (while (not (equal pt nil)) (setq ptlist (cons pt ptlist)) (setq pt (getpoint "
define point:")) ) )
Now i need to draw a spline based on these points. My plan whas to simply use the acad command itself. But this option didn't work.
(command "spline" ptlist "")
Then i tried using the vla-addspline command. But i can't even get this one working .
View 6 Replies
View Related
Sep 10, 2012
There are times that I have a really long curb polyline that has both line and arc segments. I wish to pick two points along that polyline and have it give me the distance between those two points along the path of the polyline.
Do we have this ability natively? Have I been missing something all this time? Normally I have to make a copy of the original entity, ... break, break, list erase or undo....
View 6 Replies
View Related
