I have used v2006 til recently. Now I use LT 2010. I just use multileaders for arrows. I am starting at the arrow head, and I want the tail to end on the "endpoint" of a line. When I "right click" to finish the command, the tail of the arrow "jumps off" the endpoint or nearest or whatever snap point I use. I have looked in the settings and turned all the text & landings off & set break size to zero.
View 2 RepliesWhen using grips to move a multileader source block with the attachment defined as insertion point (the insertion point being the center of the source block) the grip point moves off of the block if the move is to the left of the multileaders end point. When the drawing is reopened the blocks move from where they were placed to the off insertion point grips. A screen shots jpg and a drawing file are attached
View 2 Replies View RelatedThe multileader arrow is not showing even if the number is increased (ie from "4" to "10") in the multileader dialog box or under the properties when modified.
View 2 Replies View RelatedSee attached file.
I have this special type of callout, which is not easy to draft, but it looks pretty in plans. Is there any easy way to convert this to multileader?
Usually, I create it as block, insert it and change location of solid arrow around textbox. If I want to relocate this callout, Its not that easy as like multileader. I have to move solid arrow around textframe (from one corner to other) to point the same location. can this be done automatically (like mleader?)
Why my Block command does not work anymore?
I type in the command ( I'm an old school typer, hate the buttons ) BLOCK....then the next thing that happens is (after hitting enter of course), my crosshairs instantly turn into the Windows arrow.
I wasn't playing with any switches. I was just trying to make a little block with a number in it.
Yes, I restarted AutoCAD, restarted the computer, did not reload in AutoCAD.....AutoCAD 2011 by the way.
I run Windows 7 Home Premium 64bit.
I have to do a WBLOCK to make the blocks I need to bypass this odd behavior.
Ok so im working on a project
An animated email signature where an image of an arrow moves from the left to the right of the screen - easily done with a few frames and animation in gimp the arrow needs to move behind a paragraph of text which has the persons name, work address, email and phone numbers.
So the question remains is it possible to have one fixed frame (persons contact details) in a project of say 20 frames (which make the moving arrow behind the text)?? AND can
I have been using Corel Draw primarily in my work for more than 20 years but have never taken the time to understand this....nor why on some artwork an object will move fractionally but on other artwork (specifically this time, a 20m x 10m workspace for vehicle signage) the objects move 200 or 300mm!?
I always thought this was a 'drawing precision' setting but even when I set that to 1 decimal place it doesn't seem to affect this.
I know there is a command for making a hole on a wall or a facade without compromising the finishes on the wall.
eg:i have a wall now drawn out, with all the details of the wall done, but i realise now have to make a window out of the wall i have hatched, but i do not want to create a rec and trim it. as i may have to change the window position again.
Since i updated PS (CS6) the last time it has this very strange behavior when i try to position a object via the Arrow Keys.When i hit a Button very fast (3 times) the object jumps back to its very first position where i started to move it.
When it is a new "feature" - where can i turn it off?
Apart from FLATTEN, is there a way to change the Z coordinates of an MLEADER to stop the text from appearing bold.
FLATTEN explodes the MLEADER & is thus not suitable for this.
Just converted from 14LT to 2014LT. In 14LT, when drawing a shape, say 4' by 5', I used to be able to draw the first two lines, 4' and 5' and then simply push the up arrow to retrieve the last two entries at the command line. When I do that now, it gives me some sort of dimensional coordinates.
Also, same subject, different useage, when drawing from points to points, I used to be able to draw a line from a point to a snap point such as intersection and then simply push the up arrow to retrieve that command to the command line over and over depending on a snap by snap basis. Again, it just gives me the dimensional coordinates.
I'm snapping to the corners of my multileader text boxes. OSNAPNODELEGACY is set to 1 and I'm not snapping to regular text or mtext. How can I change this behavior for the multileader text?
View 6 Replies View RelatedMy current company have funny setting. It is time consuming task to manually open dialog box to change the setting for old drawings. May I know any command that I can use, so that I can copy and paste those command in the command window to change the properties.
View 6 Replies View RelatedAutocad2010 there is a blue triangle preceding layer name in property box on some layers as shown on attached image. Sometimes these layers are turned on when viewing paperspace, sometimes they do not show up.
View 3 Replies View RelatedIs there anyway to save a multileaderstyle so that I don´t have to create it every time I open a new drawing?
View 3 Replies View RelatedI noticed that some multileader move when editing and some do not. This is very frustrating. Usually this seems to happened when annotative scale is on. I tried to avoid this happening by turning off annotative scale and this does not work. Instead I go to another file to find the other multileader text that doesn't move when I edit. I tried to find what causing this shift in the properties menu but can't see the difference between the two.
How to stop the multileader shifting!? Is this a bug?
I have noticed on several drawings that the multileaders change themselves when the drawing is closed and opened again. I put the multileaders in, they look fine, and when I close and open the drawing the multileader has extended itself across my text. If I edit it it fixes itself but it 'breaks' itself again once I close and open.
View 2 Replies View RelatedI am just wondering how is possible to set up a Multileader style that creates text with a background mask.
I have been trying to get this feature in the Multileader style manager and I could not find it in order to avoid to set up background mask every time I create a Multileader
in general, I add my multileaders in paperspace after I have set my model space scale. However, I am now bound to that scale! That is, ML in paperspace really only have one scale: 1-1, right? For example, I wanted to zoom in to a part of my project (ie, reduced my scale by a 1/3) and all my ML we pointing erroniously into space.
Just so I undestand, if one anticipates changing the scale of a drawing mid-project, the ML should be made annotative, and placed in model space?
Actually We are trying AutoCAD 2010 and i have a question about multileader i cannot find in the manual.we are used to set a bright background mask under our text (including Mtext, Qleader, Dimensions) this way the printed text can be seen much better in dark area.
Now i'm am upgrading from AutoCAD 2007 and discovering Multileader (and i cannot find the Qleader button on the ribbon) so i conclude the new "standard is multileader", this is annoying because i cannot find anywhere how to put text mask background inside text in mleader. any option available? i would like to begin to use this function, but the text background is mandatory here.
I'm teaching myself 3D from a textbook. The text gives an example of how to create a UCS that is located on a 3D example part from the CD that came with the book; this is done using the UCS command. It also shows how to use the viewport presets. I was able to move the UCS as needed around the part, I was able to use the viewport presets to look at the part from different sizes, but if I created a UCS and then used the preset views, the new UCS I created did not stay oriented, but instead appeared to default to the origin. But when I rotated the part with the mouse without using viewport presets, the UCS stayed put.
View 2 Replies View RelatedI have recently converted mtext to multileader text & i thought it was causing some issues but now im not so sure. Some of my users are experiencing a long time to regen & it has caused some peoples computers to freeze up. Is there a setting or a variable that could be causing this? I am not sure if this is an issue with the multileaders or with autocad release 13 or 14 in general. I had the users turn regenauto off until i can find a solution.
View 3 Replies View RelatedWhen we copy multileadered items from one viewport to another the leaders do not show up, but the text does.
View 3 Replies View RelatedAutoCad 2012 SP1 / Windows 7 64 bit
Sometimes I have MLeader text without Mleaders (ie, I remove the leader arm using MLEADEREDIT). Then when I go to edit this 'floating note', the base point moves:
In this screenshot, I've just finished editing the text. Note that I added in the diagonal line at the current insertion point of the Mleader text (top right):
Then, after I click outside the Mleader box, the text moves:
THis happens only with right-aligned MLeaders, and keeps happening, ie if I edit this text again and close it again, it will move again.
I have a drawing with exsisting multileaders in it.
I am trying to apply the match properties to a newly created multileader but it isn't working.
I'm using the Multileader Align tool for my labels and it works great as long as my labels are left justified. I noticed this issue has been brought up before but didn't know a way to make it work for right justified text.
My problem is this: right justified text will not justify properly. It will not justify the same way that left justified text does. If you can follow this, leaders that have text that are left-justified will align according to their leader lines and everything looks neat and correct. The leaders that are right justified do not align properly because they align to the left side of the text. See the following screen shots and you'll understand...
Incorrectly justified leaders.
Correctly justified leaders
We are trying to use the "Underline top line" option located in the Content tab of the Modify MultiLeader Style dialog in AutoCAD 2012 (See attachment).
The minor issue we have is that there seems to be no way to adjust the gap between the text and the "underline". In regular dimensions, there is a dimvar called DIMGAP that controls this distance. Is there any way to control the distance between the top line MText and the "underline"?
without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
I use AutoCAD Mechanical 2012. The attached cad files are shown. One is filled on arrow and pline. The other is not filled on arrow and pline.
These file used same system variables. How can do this? I would like know for system variables that possible can do.
I am trying to draw dimension leader arrows. I start "_LE QLEADER" and go to settings and tell it I want my arrowhead to be "closed filled". I draw the arrow, and it comes up as a "DOT" arrow.
I can change this in the Properties, but who wants to do that every time? When I go back to "_LE QLEADER" and go to settings, the arrow block is set back to DOT, even though I just changed it to "closed filled".
I used "rename" to rename my "closed filled" block to "dsfsdfsdf", in case the block got redefined somehow.My dimblk is set to "", as are dimblk1 and dimblk2. Tried both setting of dimsah as well.
I do not see any "CExxxxxx" variable which might control this.
I have 2 dimension styles, but for one, I can't change the arrowhead
In the attachment, there are 2 dimensions, one of each style. The left one works good, the right one doesn't reflect any changes to arrows (type, size).