I use AutoCAD Mechanical 2012. The attached cad files are shown. One is filled on arrow and pline. The other is not filled on arrow and pline.
These file used same system variables. How can do this? I would like know for system variables that possible can do.
I have this north arrow that is not working in a clients drawing. Look at this drawing with the block in it and determine why the arrow head is filled in the block editor but not filled in the drawing (model space)???
View 3 Replies View RelatedI have LWPOLYLINEs that represent a cross section of a train tunnel. Each LWPOLYLINE lists its 2D points in an Object Coordinate System.My task is to create 3D Polylines in WorldCoordinateSystem using those LWPOLYLINEs.I have posted a drawing with sample objects.
I have attached a sample drawing. Drawing was created with Civil 3D 2013, but I exporttoautocadr12dxf'd it and then save to 2004 dwg so most should be able to open it.
I am trying to draw dimension leader arrows. I start "_LE QLEADER" and go to settings and tell it I want my arrowhead to be "closed filled". I draw the arrow, and it comes up as a "DOT" arrow.
I can change this in the Properties, but who wants to do that every time? When I go back to "_LE QLEADER" and go to settings, the arrow block is set back to DOT, even though I just changed it to "closed filled".
I used "rename" to rename my "closed filled" block to "dsfsdfsdf", in case the block got redefined somehow.My dimblk is set to "", as are dimblk1 and dimblk2. Tried both setting of dimsah as well.
I do not see any "CExxxxxx" variable which might control this.
I have 2 dimension styles, but for one, I can't change the arrowhead
In the attachment, there are 2 dimensions, one of each style. The left one works good, the right one doesn't reflect any changes to arrows (type, size).
I can't figure out why only on one layer the arrowheads on dimensions are not solid. They are made up of low resolution hatches.
Also the screen shows black and white when plot is in monochrome and color only when the plot setting are for color.
I can't figure out how to keep the screen in color regardless of plot settings.
Is there a way to move the tip of the other scale's arrow of an annotative multileader in the model space ?
For exemple, I shifted this tree a little bit to the left. I have a multileader pointing to the middle of it to indicate the tree species. When selecting the multileader, I can use the little blue square to move the tip of the small arrow but how can I move the other one ?
Since that multileader is pointing to other trees as well, I cannot move the whole thing.
I guess I could go to the paper space and into a viewport using that scale, but I need to do that quite often and I'm sure there should be an easier way.
I can't find a solution to make it pop-up. It works when I want to stretch the line clicking a grip though.
I wonder if my AutoCAD got corrupted or there's a setting for it. I lean to believe it's the former.
The multileader arrow is not showing even if the number is increased (ie from "4" to "10") in the multileader dialog box or under the properties when modified.
View 2 Replies View RelatedSee attached file.
I have this special type of callout, which is not easy to draft, but it looks pretty in plans. Is there any easy way to convert this to multileader?
Usually, I create it as block, insert it and change location of solid arrow around textbox. If I want to relocate this callout, Its not that easy as like multileader. I have to move solid arrow around textframe (from one corner to other) to point the same location. can this be done automatically (like mleader?)
I have used v2006 til recently. Now I use LT 2010. I just use multileaders for arrows. I am starting at the arrow head, and I want the tail to end on the "endpoint" of a line. When I "right click" to finish the command, the tail of the arrow "jumps off" the endpoint or nearest or whatever snap point I use. I have looked in the settings and turned all the text & landings off & set break size to zero.
View 2 Replies View Relatedwhy doesn't the arrow leader disappear when I flip my arrow direction to the inside..
see image
Why my Block command does not work anymore?
I type in the command ( I'm an old school typer, hate the buttons ) BLOCK....then the next thing that happens is (after hitting enter of course), my crosshairs instantly turn into the Windows arrow.
I wasn't playing with any switches. I was just trying to make a little block with a number in it.
Yes, I restarted AutoCAD, restarted the computer, did not reload in AutoCAD.....AutoCAD 2011 by the way.
I run Windows 7 Home Premium 64bit.
I have to do a WBLOCK to make the blocks I need to bypass this odd behavior.
I have terrible lag whenever I am drawing a polyline. It seems like it is taking forever to render the preview of the line when I am dragging the line across the screen. I would prefer to just turn off the line preview if at all possible. So far, I have not been able to find a way to do this. When I say preview of the line, I am talking about the transparent line that follows your cursor after you start a polyline and exists until you click to place the line where you want it.
I am running Windows 7 Pro 64-bit
Dell Precision M6600
8-gb ram
NVIDIA® Quadro® FX 2800M graphics
Recieved a ACAD converted Microstation File for use in an upcoming construction project. Would like to convert all of the existing ellipses to polylines. Have read several threads that lead me to believe redrawing them is about the only real way to do it. Posting here in hopes of a solution. Drawing contains 127 ellipses, and I dont want to redraw all of them!!
Currently on C3D2012.
what I need to do is to flatten a spline into a pline because I need to measure its diameter.
I know how to it with a 2d spline but how can I manage in case I have a 3d one?
I'm using AutoCAD 2013 and it will not convert a p-line to revcloud .
View 9 Replies View RelatedHow to convert pline to Alignment C3D 2014
View 1 Replies View RelatedWhen I did the confirmation after I drew the arrow, it shrank to be small. Like the pictures attached.
View 9 Replies View Relatedwhe i try to draw a pline it accepts the first numerical entry but locks up on the second point. Also when i use this command no matter what layer it is on the line becomes very fat
autoCAD architecture 2013
Is there a way to add/remove vertices from polylines using the grips method similar to editing hatch boundaries? I know of "Pedit" and "edit vertex" then "add vertex" but this seems like too many steps after working with hatch boundaries.
View 2 Replies View RelatedWhat's the commnd to change the default line thickness in AutoCAD 2012?
I know to PE - W - x Value, but is there a command that changes what a pl's width starts at?
I want to create a segmented polyline with known angles / lengths, but I want to do this in 1 operation without having to copy/rotate/chamfer etc.
I'm sure it has something to do with UCS, but I've not used it in quite some time, I am stumped and everything I have tried so far has failed.
difference between Trim and Pline Boolean operation?
View 5 Replies View Relatedhow to change lineweight on the circle? another word i want to make the arc line thicker. Can we do that rather than offset the circle and Hatch it. I use Pedit alot on straight line but won't work on circle. As you can see on the picture below when i changed the lineweight to be bigger but the circle is still the same.
circle.jpg
what is the setting to tell a line to extend to the face of a pline when that line doesn't actually intersect with the pline? see image below...line 1 will extend to pline faces A and B, but how do i get line 2 to extend to those faces? i know this worked when i used autocad 2008 but i'm now using 2012 LT so hopefully it still works, i just don't remember the command name to control it.
line extension 2012-6-12.JPG
I have bearings and distances but I am wondering if using PLIN is the best method to draw parcels in AutoCad Map 2012. I have a layer of the Townships, Ranges and Sections that I hope to align with the drawings. Most of the time it looks okay meaning they line up and for the most are where they are suppose to be but ever so often I have problems.
View 2 Replies View RelatedI am looking for an AutoLISP routine, which gives all aligned dimensions of a closed polyline, drawn in 3d.
I have attached a 2D drawing for reference.
Is there anyway to use LISP to list the x,y coordinates of a pline?
View 3 Replies View Relatedwe develop a cam-function with c-sharp and like to get the turningdirection of a closed pline with arcs. As arcs can "overtake" points things are getting a bit difficult. Is there a way to read the normalvector of a closed pline?
View 8 Replies View RelatedHave a lisp or other addon to make pline segments perpendicular after digitizing buildings.
View 2 Replies View Related