AutoCad :: Difference Between Trim And Pline Boolean?
Dec 27, 2011difference between Trim and Pline Boolean operation?
View 5 Replies
ADVERTISEMENT
Illustrator :: Difference Between Live And Trim Size?
Sep 19, 2013I was given these instructions :
The booking is for a full page and the dimensions are as under: height 262mm x width 191mm, trim size height 278 x width 216 & add 5mm bleed on all sides.
When I create a new illustrator doc which dimensions should I enter? 262mmx191mm with 5mm bleed? or 278mmx216mm with 5mm bleed?
AutoCAD Visual LISP / AutoLISP :: Convert 2D Pline With OCS Into 3D Pline In WCS
May 29, 2012I have LWPOLYLINEs that represent a cross section of a train tunnel. Each LWPOLYLINE lists its 2D points in an Object Coordinate System.My task is to create 3D Polylines in WorldCoordinateSystem using those LWPOLYLINEs.I have posted a drawing with sample objects.
I have attached a sample drawing. Drawing was created with Civil 3D 2013, but I exporttoautocadr12dxf'd it and then save to 2004 dwg so most should be able to open it.
AutoCAD .NET :: Reversing A Boolean Operation
Sep 25, 2013I would like to reversing a Boolean operation if an error happens.
I have two solids that when I try to perform a Subtract Boolean Operation gives me an error. When the error happens I lose both solids. I would like to be able to reverse the subtraction in an event of an error so that I still have both solids.
Dim Solid_1 as Solid3d = CreateSoldFromPl(plinePoints1)
Dim Solid_2 as Solid3d = CreateSoldFromPl(plinePoints1)Try
Solid_1.BooleanOperation(BooleanOperationType.BoolSubtract, Solid_2)
End Try
AutoCAD Inventor :: Create Boolean Parameter
Sep 13, 2011Does the IV2012 API allow the creation of a Yes/No parameter. I have created "Text" parameters but I am stumped on this one.
View 5 Replies View RelatedAutoCAD Inventor :: Add Boolean User Parameter?
Aug 24, 2012Looking for sample VBA code to get all referenced documents from an assembly and add a boolean user parameter to each (parts and sub assemblies). I have been trying to modify peices of code I have found on this forum and Mod the Machine, but have had no luck so far.
There may also be standard content center parts in the assembly as well that I would like to somehow identify so I can skip over them.
AutoCad :: How To Conduct Boolean Operation In Simpler Way
Dec 8, 2011For conducting Boolean operation, I use Trim but I feel troublesome since many selections have to be carried out. So I wonder are there some new way to simplify the process?
View 9 Replies View RelatedAutoCAD 2010 :: Unable To Perform Boolean Operations
Sep 5, 2012I have been working with autocad for approximately five months. I feel as though I have a pretty good grasp of the program's capabilities and commands, but I'm stumped. I've successfully imported a 3dm file to autocad 2012 and all of the geometry is present in autocad (it is not a 2d wireframe), but I am unable to perform boolean operations on it.
The model has also taken on a strange pale blue hugh, though the wirefram is lavender (unless I explode it and then unionize it several times over. Unfortunately this results in an issue with surface faces intersecting with one another, as well as a loss of geometry). The model cannot be converted to a surface nor a solid which means that it is not water-tight. This is not a model that I have created. I've been tasked by my employer to make several changes to it. Why (without exploding it) I cannot perform boolean operations.
AutoCad 3D :: Solid Won't Slice Or Respect Boolean Operations?
Aug 16, 2011I'm modeling a fireplace in AutoCAD 2012 that has 2 solids that won't slice or work with boolean operations.
I'm trying to subtract the joints out of the header and legs of the fireplace to create seperate pieces but it won't do it. Slicing the solid at the joints doesn't work either.
The 3d model is too big to upload.
AutoCAD Inventor :: Perform Subtract Boolean Operation On Two Separated Solids
Nov 19, 2011I have inventor 2012 and I´m having trouble doing a cut boolean operation to two solids. One is a revolved elipse, so it´s a kind of egg, and the other one is an extruded rectangle.
I want to cut the egg in the rectangular solid, so I can obtain a rectangular solid with an empty egg space inside. I tried to use the "derived" command, so I derived the egg from the rectangular solid, and used the combine command, but with no success. Right now I have two separated solids on the same file (the egg and the extruded rectangle).
AutoCAD LT :: Extreme Lag While Drawing PLine
Nov 18, 2013I have terrible lag whenever I am drawing a polyline. It seems like it is taking forever to render the preview of the line when I am dragging the line across the screen. I would prefer to just turn off the line preview if at all possible. So far, I have not been able to find a way to do this. When I say preview of the line, I am talking about the transparent line that follows your cursor after you start a polyline and exists until you click to place the line where you want it.
I am running Windows 7 Pro 64-bit
Dell Precision M6600
8-gb ram
NVIDIA® Quadro® FX 2800M graphics
AutoCAD Civil 3D :: Ellipse To Pline
Aug 8, 2012Recieved a ACAD converted Microstation File for use in an upcoming construction project. Would like to convert all of the existing ellipses to polylines. Have read several threads that lead me to believe redrawing them is about the only real way to do it. Posting here in hopes of a solution. Drawing contains 127 ellipses, and I dont want to redraw all of them!!
Currently on C3D2012.
AutoCad :: Convert 3DSPline Into A Pline?
Jan 12, 2012what I need to do is to flatten a spline into a pline because I need to measure its diameter.
I know how to it with a 2d spline but how can I manage in case I have a 3d one?
AutoCad 2D :: Converting PLine To Revcloud
Dec 11, 2012I'm using AutoCAD 2013 and it will not convert a p-line to revcloud .
View 9 Replies View RelatedAutoCAD Civil 3D :: Convert Pline To Alignment?
Oct 30, 2013How to convert pline to Alignment C3D 2014
View 1 Replies View RelatedAutoCAD 2013 :: Draw Arrows By Pline
Oct 20, 2013When I did the confirmation after I drew the arrow, it shrank to be small. Like the pictures attached.
View 9 Replies View RelatedAutoCAD 2010 :: Not Filled On Arrow And Pline
Jan 3, 2014I use AutoCAD Mechanical 2012. The attached cad files are shown. One is filled on arrow and pline. The other is not filled on arrow and pline.
These file used same system variables. How can do this? I would like know for system variables that possible can do.
AutoCAD Architecture :: Pline Coordinates Not Responding?
Jun 4, 2012whe i try to draw a pline it accepts the first numerical entry but locks up on the second point. Also when i use this command no matter what layer it is on the line becomes very fat
autoCAD architecture 2013
AutoCAD Architecture :: PLine Edit Using Grips
Feb 25, 2010Is there a way to add/remove vertices from polylines using the grips method similar to editing hatch boundaries? I know of "Pedit" and "edit vertex" then "add vertex" but this seems like too many steps after working with hatch boundaries.
View 2 Replies View RelatedAutoCad 2D :: Changing Default Pline Width
Feb 15, 2013What's the commnd to change the default line thickness in AutoCAD 2012?
I know to PE - W - x Value, but is there a command that changes what a pl's width starts at?
AutoCad :: Drawing PLINE With Known Lengths And Angles
Aug 7, 2013I want to create a segmented polyline with known angles / lengths, but I want to do this in 1 operation without having to copy/rotate/chamfer etc.
I'm sure it has something to do with UCS, but I've not used it in quite some time, I am stumped and everything I have tried so far has failed.
AutoCad 2D :: Lineweight For Circle Won't Work / Pline
Aug 20, 2013how to change lineweight on the circle? another word i want to make the arc line thicker. Can we do that rather than offset the circle and Hatch it. I use Pedit alot on straight line but won't work on circle. As you can see on the picture below when i changed the lineweight to be bigger but the circle is still the same.
circle.jpg
AutoCad :: Extending Line To Face Of Pline?
Jun 12, 2012what is the setting to tell a line to extend to the face of a pline when that line doesn't actually intersect with the pline? see image below...line 1 will extend to pline faces A and B, but how do i get line 2 to extend to those faces? i know this worked when i used autocad 2008 but i'm now using 2012 LT so hopefully it still works, i just don't remember the command name to control it.
line extension 2012-6-12.JPG
AutoCAD Map 3D :: Using PLINE For Land Surveyed Descriptions
Mar 12, 2012I have bearings and distances but I am wondering if using PLIN is the best method to draw parcels in AutoCad Map 2012. I have a layer of the Townships, Ranges and Sections that I hope to align with the drawings. Most of the time it looks okay meaning they line up and for the most are where they are suppose to be but ever so often I have problems.
View 2 Replies View Related3ds Max :: Boolean Shape From Body Object
Feb 16, 2011I have a body object from Inventor. I need to create a rendering showing the inside of the unit. I created a spline, and extruded it as my "cutting object". When I try Boolean or ProBoolean, it doesn't look right.
ProBoolean makes it disappear and Boolean creates gaps in the geometry.
I would attempt to re-model this in MAX but it is far beyond my abilities right now.
Deanbody_object_boolean_help.zip
Max 2014 (SP2)
Win 7 64-bit; Dual Xeon E5-2687W @ 3.10 GHz; 64 GB Ram
NVIDIA GeForce GTX 570; Quadro 4000
3ds Max :: Size Limit For Boolean Operation?
Jun 28, 2012I have a relatively flat shape with many curves on the edges. I am trying to intersect a plane with all the curved edges and do a Boolean intersection. It worked with a less complex shape but this one has over 19000 objects. Any size limit on Boolean operations?
View 2 Replies View Related3ds Max Modeling :: Use The Boolean Modifier More Than One Time?
Jun 28, 2011I am trying to use the Boolean modifier more than one time on a box and it doesn't seem to work. I pick the Operand B to subtract on the second object I want to Boolean out, it disappears, but there is no hole there.
View 8 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Pline Dimensioning
Sep 2, 2005I am looking for an AutoLISP routine, which gives all aligned dimensions of a closed polyline, drawn in 3d.
I have attached a 2D drawing for reference.
AutoCAD Visual LISP / AutoLISP :: Get X / Y Coordinates Of A Pline
Feb 1, 2012Is there anyway to use LISP to list the x,y coordinates of a pline?
View 3 Replies View RelatedAutoCAD .NET :: How To Get Normal Vector Of Closed Pline With Arcs
Jun 15, 2012we develop a cam-function with c-sharp and like to get the turningdirection of a closed pline with arcs. As arcs can "overtake" points things are getting a bit difficult. Is there a way to read the normalvector of a closed pline?
View 8 Replies View RelatedAutoCAD Map 3D :: Pline Segments Perpendicular After Digitizing Buildings
Jan 31, 2012Have a lisp or other addon to make pline segments perpendicular after digitizing buildings.
View 2 Replies View Related