I have a relatively flat shape with many curves on the edges. I am trying to intersect a plane with all the curved edges and do a Boolean intersection. It worked with a less complex shape but this one has over 19000 objects. Any size limit on Boolean operations?
View 2 RepliesI would like to reversing a Boolean operation if an error happens.
I have two solids that when I try to perform a Subtract Boolean Operation gives me an error. When the error happens I lose both solids. I would like to be able to reverse the subtraction in an event of an error so that I still have both solids.
Dim Solid_1 as Solid3d = CreateSoldFromPl(plinePoints1)
Dim Solid_2 as Solid3d = CreateSoldFromPl(plinePoints1)Try
Solid_1.BooleanOperation(BooleanOperationType.BoolSubtract, Solid_2)
End Try
For conducting Boolean operation, I use Trim but I feel troublesome since many selections have to be carried out. So I wonder are there some new way to simplify the process?
View 9 Replies View RelatedI am having both objects disappear after a Boolean Union (I am going to try creating just two random objects - a cube and a sphere - and seeing if the operation works with them).
One thing that I have thought is that the resolution of the mesh might be srewing up the operation (The sizes of the polygons in the two objects is pretty different).
So that might be a factor (when I am in Mudbox, I could try not subdividing the smaller objects as much as the larger one, so that the polygons are the same size).
when aplying mesh->boolean->difference both objects disappear?
[URL]
I have inventor 2012 and I´m having trouble doing a cut boolean operation to two solids. One is a revolved elipse, so it´s a kind of egg, and the other one is an extruded rectangle.
I want to cut the egg in the rectangular solid, so I can obtain a rectangular solid with an empty egg space inside. I tried to use the "derived" command, so I derived the egg from the rectangular solid, and used the combine command, but with no success. Right now I have two separated solids on the same file (the egg and the extruded rectangle).
I've been a long-time VideoStudio user and recently installed the trial of X5 (my last purchased version was X2, but, it's time for an upgrade ). VS X5 is installed on a Windows 7 Ultimate 64-bit PC. If I capture to an internal NTFS drive, the tapes capture as a single ~19 GB AVI file; however, if I capture to my Linux NAS server with ReiserFS file system, VS breaks the captured files into 4GB chunks and I end up with five files per tape. There is no 4GB file limit on ResierFS. I have copied several 25+ GB blue-ray files to the NAS with no problem. ReiserFS has an 8TB file size limit. Captured through another video editing program, I do not have this problem. It appears that VS X5 assumes a 4GB limit on network devices (or, at least, on my Linux - ReiserFS NAS).
View 1 Replies View RelatedI did not know there would be a size limit to fit a video file to a DVD. I thought the premise would be to fit any size video file to a DVD, and the the sell-out would be the larger the video file the poorer the DVD quality.
I got two error messages:
"The miminum size be reducing the bit rates still cannot fit once disc."
"Convert step got some problems."
What are the minimum requirements for fitting a video file to a DVD?
I have too many paper sizes in PageSetup. This makes choosing the proper page size too lengthy and time consuming.
I only use two paper sizes namely A4 and A3 so I don't need to have English paper size like 11x14 in, Hagaki, Index Card and 30 other pagesetup.
How can I delete or get rid of unnecessary paper sizes?
Im getting not enough memory (RAM) error messages attempting to photomerge or auto-align large images. Any other filter or tool that I need works just fine on these size files. Neither tweaking CS3 preferences (as has been discussed rather thoroughly on this forum) nor toggling the 3 GB switch under XP (my PC has 4 GB ram and >200 GB scratch) helped. Given optimal settings, what are the upper dimensions that I might reasonably expect to photomerge, either under XP or Vista 64? If its not unheard of to photomerge and auto align huge files, Id upgrade my system. Otherwise, Ill plan the upgrade and wait for CS4.
View 6 Replies View RelatedAny time I try to print a picture I get a purple frame which limits the size of any picture to 5X7. How do I remove this frame?
View 11 Replies View RelatedIs there a limit to the size of the catalog in PE6. My Catalog is approaching 178 MB and thumbs cache is nearing 1.5GB. The Organizer Keyword mapping function is responding very sluggish even after performed a Catalog repair and optimization.
View 6 Replies View Relatedi'm currently using LR 4.0 and found a problem with file export.
I have two tiff files:
Tiff 1: 283MB, full resolution ( 2336 x 3504 )
Tiff 2: 233MB, full resolution ( 2336 x 3504 )
Export witht: 574 x 1000 image width
JPG 1: 168kb
JPG 2: 194kb
Both jpegs have 600px x 887px (fram with mogrify plugin#) and 100%jpg quality.
Whe I set a limit to file size of 154kb, I receive following:
JPG 1: 102kb
JPG 2: with error ( couldn't create jpg which fit's the file size limit of 154kb )
If I export the second tiff manually with 90% jpg quality and no filesize, I get:
JPG 1: 114kb
JPG 2: 135kb
So it seems that the "limit file size" isn't really working.Also it seems that Valus between 92 and 100 ends in: same as 100.
I have been designing for a lot of mobile sites these days, in particular: iphone retina display (640w). Most of the time these designs can be long in the tooth with the height of these documents - exceeding 8000 pixels at times. I noticed that 8000 pixels is the threshold limit for the "save for web" export. Anything greater than 8000 pixels will be downgraded in quality on retina devices by scaling the image. The jpg will still be the correct height and width, but when viewed on an iphone, you can easily see the degradation. Images and text are blurry.This is no bueno when trying to show a client what their site will look like on an iphone.
A preference to be changed? Am I missing something to get the full quality of my design comp in order to preserve retina display quality?
I take a large number of event images and the usual client request for images being sent to the press is image size rather than resolution, dimensions or other requirements.
Clearly in LR3 if the client has requested 3MB jpg the easy option is to after processing take my Canon 5d mkii RAW file and just hit export to max 3MB jpg.
My question is is it better - ie image quality better - to export by resizing longest edge to approx 3000 px and exporting to jpg which results in a similar file size, though different pixel dimensions? Or are they effectively the same?
I have a 180GB SSD, which I specifically bought, to make Lightroom (4.4) faster and to store 1:1 previews. Initially, I set up Lightroom catalog (containing 18221 images) to never delete 1:1 previews and stored the previews in a high quality mode. This quickly fill up my SSD. I would like to set it up to store as many previews as it can while leaving atleast, say 20GB, free on SSD. The alternative, which is to discard 1:1 previews after 30 days or so, is not really acceptable to me.
View 5 Replies View RelatedIs there a way to batch process file size and not image size? Example is I want all images to only be 30k in size, but leaving the image size as is.
View 2 Replies View RelatedI'm trying out X4, and I don't know if I'm doing something wrong, but it seems like the canvas size on X4 at any resolution is much smaller than in X3, e.g., at 200 pixels/inch, X4 allows 50"x50", while X3 allows 164x164". Similarly at 150 pixels/inch, X3 allows 218", while X4 allows approximately 67". Given the fact that X4 is supposed to provide access to more memory, and uses a scratch pad, this does not make sense to me-
View 4 Replies View Relatedam trying to select between red and pink...on a graded level, which makes it harder. I am using the select tool and select similar in order to do so...I was wondering if their was a way to limit the particle size (object total pixzel area) that photshop considers when selecting similar things.
For example, like I stated above, I am selecting for red objects against pink objects...and the red objects are round, so is there a way to limit selection to objects red and have a objective radius of a few pixels?
Is there a simple way to limit the file size of the photos selected in LR3 for a photomerge in PS5?
I have found that without limiting the size, the panoramas generated are very large - 1GB or greater.
I've found an work around by opening the photos in Bridge and then in Camera Raw where I can reduce the file size before using PS5 for photomerge. After I've done this, it's a bit of a hassle to get the panorama back into LR3. The benefit of this approach is that it speeds up the processing significantly and downstream with any subsequent processing since the files are just large and not ginormus.
If this isn't possible, this seems like a good idea for LR4.
Do we have a size limit of the models using replace model reference?
Just done a little testing with some iam's
Anything larger that 500 parts and the drawing does nothing, no replace..
I rendered an animation and saved it as .avi file. But the file size limit to 0.99 GB so only first few seconds of the animation was saved.
what I can do to increase the file size limit so the animation can be fully rendered and saved?
I have created an item made up of lines, circles and arcs. One side line distance will control all other sides, circles and arcs. I applied geometric constraints and then Dimensional constraints. D1 is the distance that will control all other objects. I have it working so that when I change D1, the sides adjust accordingly and the arcs and circles keep their geometry.
I was wondering if there is a way to add a range of distances for D1 so that if someone goes below the minimum value, nothing happens and if you go above the maximum value, nothing happens? I know if you make a block, you can make a list of distances for D1 to move. Is there a way to do this in the design drawing? Although, I don't just want a set range, I would like any distance between, say, 8 - 12 inches.
I tried to set some parameters in the Parameters Manager with no luck. Maybe there is an expression to use? Where would you find this expression if there is one?
what the file size limit is for importing point clouds into Inventor? Or is that a how long is a piece of string question that depends on computer ability?
View 2 Replies View RelatedIs there any limit to the number of images that can be put into a PSE10 catalog? If so, what is the limit?
View 3 Replies View RelatedI have a body object from Inventor. I need to create a rendering showing the inside of the unit. I created a spline, and extruded it as my "cutting object". When I try Boolean or ProBoolean, it doesn't look right.
ProBoolean makes it disappear and Boolean creates gaps in the geometry.
I would attempt to re-model this in MAX but it is far beyond my abilities right now.
Deanbody_object_boolean_help.zip
Max 2014 (SP2)
Win 7 64-bit; Dual Xeon E5-2687W @ 3.10 GHz; 64 GB Ram
NVIDIA GeForce GTX 570; Quadro 4000
I am trying to use the Boolean modifier more than one time on a box and it doesn't seem to work. I pick the Operand B to subtract on the second object I want to Boolean out, it disappears, but there is no hole there.
View 8 Replies View RelatedDoes the IV2012 API allow the creation of a Yes/No parameter. I have created "Text" parameters but I am stumped on this one.
View 5 Replies View RelatedLooking for sample VBA code to get all referenced documents from an assembly and add a boolean user parameter to each (parts and sub assemblies). I have been trying to modify peices of code I have found on this forum and Mod the Machine, but have had no luck so far.
There may also be standard content center parts in the assembly as well that I would like to somehow identify so I can skip over them.
I created a cone where I wanted to cut some cylindrical hole in it so I created the cylinders and did a boolean subtraction of the cylinders from the cone.
I got the holes cut out, but the resulting object appears as though it's hollow. Is this something do do with my display or is there a setting I'm missing to create objects as hollow/solid?
I have booleand two splines, that were beveld to give them depth, than booleen together to make the shape of a car. I am having trouble completing the modeling because of the mesh. Is there anyway to make the mesh better (as in like a grid)?
View 4 Replies View Related