AutoCAD LT :: Extreme Lag While Drawing PLine
Nov 18, 2013
I have terrible lag whenever I am drawing a polyline. It seems like it is taking forever to render the preview of the line when I am dragging the line across the screen. I would prefer to just turn off the line preview if at all possible. So far, I have not been able to find a way to do this. When I say preview of the line, I am talking about the transparent line that follows your cursor after you start a polyline and exists until you click to place the line where you want it.
I am running Windows 7 Pro 64-bit
Dell Precision M6600
8-gb ram
NVIDIA® Quadro® FX 2800M graphics
View 3 Replies
ADVERTISEMENT
Nov 16, 2012
One part Two different part numbers Three drawings for one part, in three different sheet formats, 1st and 3rd having the same drawing number (=part number)Up to seven different materials. I need:
To automatically generate the three drawings (in idw or even PDF) after part creation and the content of the drawing is fully dimensioned and annotated for all available types of materials.
View 9 Replies
View Related
Nov 2, 2013
I haven't been doing graphics for a few years and are having trouble getting Xara Extreme to export a small drawing with a transparent background. I am selecting the image in Xara, Export, Save as .png, True color + alpha, Save
The image saves okay but has a white background??
View 9 Replies
View Related
May 29, 2012
I have LWPOLYLINEs that represent a cross section of a train tunnel. Each LWPOLYLINE lists its 2D points in an Object Coordinate System.My task is to create 3D Polylines in WorldCoordinateSystem using those LWPOLYLINEs.I have posted a drawing with sample objects.
I have attached a sample drawing. Drawing was created with Civil 3D 2013, but I exporttoautocadr12dxf'd it and then save to 2004 dwg so most should be able to open it.
View 3 Replies
View Related
Aug 7, 2013
I want to create a segmented polyline with known angles / lengths, but I want to do this in 1 operation without having to copy/rotate/chamfer etc.
I'm sure it has something to do with UCS, but I've not used it in quite some time, I am stumped and everything I have tried so far has failed.
View 5 Replies
View Related
Apr 5, 2011
I want to programatically remove the AutoCAD icon coming at the extreme top of AUTOCAD application.(I am using C# to customize the AutoCAD application)
Is there any API where i can show customized icon instead of AUTOCAD icon.If above is not possible is there any way to reduce the size of that icon?
View 6 Replies
View Related
Mar 23, 2013
Something that has always bothered me since Photoshop's beginnings was that in high resolution files, at extreme screen magnifications, you can't measure using the rulers easily. In other programs, as you magnify the image on the screen, the ruler marks will keep reading their measurements. In Photoshop, you only get the full inch readings, not fractions of the inch. So if I want to draw a guide at 1/16" or find something at 1/16" in Photoshop, all I see is:
You have to shrink the image back down to find the 1" line and then zoom back and count the fractions to find the one you are looking for. I know you can use the ruler tool, but let's say you want to paint, or select starting at 1/16". Using the ruler tool becomes problematic, when all you want to do is see where 1/16" is on the screen.
View 5 Replies
View Related
Mar 31, 2008
I downloaded all my JPG and RAW files to find that the JPEG images from my 5D have a overload of magenta shift. however when doing quick views in Windows Fax Viewer and BreezeBrowser the images are perfect; however when opening them up in Photoshop CS3 and Bridge the image have a magenta overload.
Unfort. I can not show a screenshot of the Windows Fax Viewer and some images because when I take a screenshot and put into photoshop the magenta appears again.
View 4 Replies
View Related
Jan 16, 2008
i got an ir filter and tried my first shots with my digital camera. i set the exposure at 1/20 at 3.5. the grain is unbelievable! the camera is a fuji s700. (i use pro cameras for my regular work, but i figured this one would be good enough for ir.)
View 1 Replies
View Related
Aug 28, 2013
Running Photoshop CC 64, Win7 x64 on an i7-3820 based machine with 32GB of ram, 256GB SSD, several 2TB drives and a GeForce GTX 650 Ti 1GB 16X video card.Running the latest non-beta WHQL drivers for the video card,
i have photoshop set to: use graphics acceleration, drawing mode advanced, opencl. When I'm using the mixer brush and with the brush set to sample all layers, depending on brush size, I experience a large lag in rendering. When doing this, my CPU usage is around 10% and disk usage is also low so I'm assuming the graphics card is the bottleneck here.
Images are from a 21MP canon 5dMK II, 8 bit files. I can replicate the problem with a single background layer and mixing/smudging on a 2nd transparent layer set to use all layers.
View 11 Replies
View Related
Dec 11, 2012
I am getting extreme variations in file size when I open my D800e nefs in Photoshop cs5, & Bridge. When I highlight the same nefs on my Mac(10.6.8) & "get info", I get another file size. D800e files are about 103 MB each at 8 bit, but can vary dramatically when I open them in Bridge or Cs5.
View 6 Replies
View Related
Aug 8, 2012
Recieved a ACAD converted Microstation File for use in an upcoming construction project. Would like to convert all of the existing ellipses to polylines. Have read several threads that lead me to believe redrawing them is about the only real way to do it. Posting here in hopes of a solution. Drawing contains 127 ellipses, and I dont want to redraw all of them!!
Currently on C3D2012.
View 5 Replies
View Related
Jan 12, 2012
what I need to do is to flatten a spline into a pline because I need to measure its diameter.
I know how to it with a 2d spline but how can I manage in case I have a 3d one?
View 9 Replies
View Related
Dec 11, 2012
I'm using AutoCAD 2013 and it will not convert a p-line to revcloud .
View 9 Replies
View Related
Oct 30, 2013
How to convert pline to Alignment C3D 2014
View 1 Replies
View Related
Oct 20, 2013
When I did the confirmation after I drew the arrow, it shrank to be small. Like the pictures attached.
View 9 Replies
View Related
Jan 3, 2014
I use AutoCAD Mechanical 2012. The attached cad files are shown. One is filled on arrow and pline. The other is not filled on arrow and pline.
These file used same system variables. How can do this? I would like know for system variables that possible can do.
View 4 Replies
View Related
Jun 4, 2012
whe i try to draw a pline it accepts the first numerical entry but locks up on the second point. Also when i use this command no matter what layer it is on the line becomes very fat
autoCAD architecture 2013
View 2 Replies
View Related
Feb 25, 2010
Is there a way to add/remove vertices from polylines using the grips method similar to editing hatch boundaries? I know of "Pedit" and "edit vertex" then "add vertex" but this seems like too many steps after working with hatch boundaries.
View 2 Replies
View Related
Feb 15, 2013
What's the commnd to change the default line thickness in AutoCAD 2012?
I know to PE - W - x Value, but is there a command that changes what a pl's width starts at?
View 9 Replies
View Related
Dec 27, 2011
difference between Trim and Pline Boolean operation?
View 5 Replies
View Related
Aug 20, 2013
how to change lineweight on the circle? another word i want to make the arc line thicker. Can we do that rather than offset the circle and Hatch it. I use Pedit alot on straight line but won't work on circle. As you can see on the picture below when i changed the lineweight to be bigger but the circle is still the same.
circle.jpg
View 5 Replies
View Related
Jun 12, 2012
what is the setting to tell a line to extend to the face of a pline when that line doesn't actually intersect with the pline? see image below...line 1 will extend to pline faces A and B, but how do i get line 2 to extend to those faces? i know this worked when i used autocad 2008 but i'm now using 2012 LT so hopefully it still works, i just don't remember the command name to control it.
line extension 2012-6-12.JPG
View 9 Replies
View Related
Mar 12, 2012
I have bearings and distances but I am wondering if using PLIN is the best method to draw parcels in AutoCad Map 2012. I have a layer of the Townships, Ranges and Sections that I hope to align with the drawings. Most of the time it looks okay meaning they line up and for the most are where they are suppose to be but ever so often I have problems.
View 2 Replies
View Related
Sep 2, 2005
I am looking for an AutoLISP routine, which gives all aligned dimensions of a closed polyline, drawn in 3d.
I have attached a 2D drawing for reference.
View 9 Replies
View Related
Feb 1, 2012
Is there anyway to use LISP to list the x,y coordinates of a pline?
View 3 Replies
View Related
Jun 15, 2012
we develop a cam-function with c-sharp and like to get the turningdirection of a closed pline with arcs. As arcs can "overtake" points things are getting a bit difficult. Is there a way to read the normalvector of a closed pline?
View 8 Replies
View Related
Jan 31, 2012
Have a lisp or other addon to make pline segments perpendicular after digitizing buildings.
View 2 Replies
View Related
Oct 3, 2013
I have just started using Autocad 2010 (i know i know, its not the latest )... but anyways.
I am facing this unique problem where i have a 3d solid object in the drawing, and when the first point in a pline command falls within the boundary of the 3d solid, autocad automatically assigns some of the properties of the 3dsolid to the new polyline i draw.
so for example, in the attached file, even if i am selecting pline command and starting a command within the rectangle (start point shown as a circle), it automatically changes the z coordinates so that the resulting pline is angled to the xy plane.
I a not sure how this happens, and how I can turn it off.
View 2 Replies
View Related
Sep 26, 2013
In continuation with thread All to Pline . I want to add one more function to this lisp i.e. Join all the objects selected.
Can this be done?
I tried this:
(command "_.pedit" "m" ename "" "j" ename "")or (command "_.pedit" "" "j" ename "" "")
But it gives me an error something like this:
Requires numeric distance, two points, or option keyword.
; error: Function cancelled
Enter fuzz distance or [Jointype] <0.000>: j
Enter join type [Extend/Add/Both] <Extend>: *Cancel*
or
Command: ch2pl
Select objects: Specify opposite corner: 5 found
Select objects:
*Invalid selection*
Expects a point or
Window/Last/Crossing/BOX/ALL/Fence/WPolygon/CPolygon/Multiple]:
; error: Function cancelled
Select polyline or [Multiple]:
Enter an option [Close/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype
gen/Reverse/Undo]: *Cancel*
Command: Specify opposite corner:
Command: *Cancel*
View 6 Replies
View Related
Nov 1, 2012
when I change the pline width to a certain thickness it don't show a solid thick line, it appear like hollow line.
View 2 Replies
View Related
