I want to programatically remove the AutoCAD icon coming at the extreme top of AUTOCAD application.(I am using C# to customize the AutoCAD application)
Is there any API where i can show customized icon instead of AUTOCAD icon.If above is not possible is there any way to reduce the size of that icon?
x6_icon.jpg
On my Desktop I use a custom icon for CDSG X6 (original version is similar to X5 and sometimes causes visual confusion).
But I have not figured out how to customize the icon on the Taskbar.
In previous versions through customize options there was the option to tick for large icons. It has been left out of X4 or is it there and I can't find it. That option was very good for big screens. Do they intend to bring it back in the update along with the colored icons.
View 9 Replies View RelatedI have terrible lag whenever I am drawing a polyline. It seems like it is taking forever to render the preview of the line when I am dragging the line across the screen. I would prefer to just turn off the line preview if at all possible. So far, I have not been able to find a way to do this. When I say preview of the line, I am talking about the transparent line that follows your cursor after you start a polyline and exists until you click to place the line where you want it.
I am running Windows 7 Pro 64-bit
Dell Precision M6600
8-gb ram
NVIDIA® Quadro® FX 2800M graphics
One part Two different part numbers Three drawings for one part, in three different sheet formats, 1st and 3rd having the same drawing number (=part number)Up to seven different materials. I need:
To automatically generate the three drawings (in idw or even PDF) after part creation and the content of the drawing is fully dimensioned and annotated for all available types of materials.
Something that has always bothered me since Photoshop's beginnings was that in high resolution files, at extreme screen magnifications, you can't measure using the rulers easily. In other programs, as you magnify the image on the screen, the ruler marks will keep reading their measurements. In Photoshop, you only get the full inch readings, not fractions of the inch. So if I want to draw a guide at 1/16" or find something at 1/16" in Photoshop, all I see is:
You have to shrink the image back down to find the 1" line and then zoom back and count the fractions to find the one you are looking for. I know you can use the ruler tool, but let's say you want to paint, or select starting at 1/16". Using the ruler tool becomes problematic, when all you want to do is see where 1/16" is on the screen.
I downloaded all my JPG and RAW files to find that the JPEG images from my 5D have a overload of magenta shift. however when doing quick views in Windows Fax Viewer and BreezeBrowser the images are perfect; however when opening them up in Photoshop CS3 and Bridge the image have a magenta overload.
Unfort. I can not show a screenshot of the Windows Fax Viewer and some images because when I take a screenshot and put into photoshop the magenta appears again.
i got an ir filter and tried my first shots with my digital camera. i set the exposure at 1/20 at 3.5. the grain is unbelievable! the camera is a fuji s700. (i use pro cameras for my regular work, but i figured this one would be good enough for ir.)
View 1 Replies View RelatedRunning Photoshop CC 64, Win7 x64 on an i7-3820 based machine with 32GB of ram, 256GB SSD, several 2TB drives and a GeForce GTX 650 Ti 1GB 16X video card.Running the latest non-beta WHQL drivers for the video card,
i have photoshop set to: use graphics acceleration, drawing mode advanced, opencl. When I'm using the mixer brush and with the brush set to sample all layers, depending on brush size, I experience a large lag in rendering. When doing this, my CPU usage is around 10% and disk usage is also low so I'm assuming the graphics card is the bottleneck here.
Images are from a 21MP canon 5dMK II, 8 bit files. I can replicate the problem with a single background layer and mixing/smudging on a 2nd transparent layer set to use all layers.
I haven't been doing graphics for a few years and are having trouble getting Xara Extreme to export a small drawing with a transparent background. I am selecting the image in Xara, Export, Save as .png, True color + alpha, Save
The image saves okay but has a white background??
I am getting extreme variations in file size when I open my D800e nefs in Photoshop cs5, & Bridge. When I highlight the same nefs on my Mac(10.6.8) & "get info", I get another file size. D800e files are about 103 MB each at 8 bit, but can vary dramatically when I open them in Bridge or Cs5.
View 6 Replies View RelatedHow do I re-install a corrupted Photoshop CC app when the Desk Top CC shows the app as "up to date"?
View 2 Replies View RelatedI bought Adobe Photoshop Elements 9 but get the following alert: "Some of the application components are missing from the Application directory, Please reinstall the application." Can it be reinstalled? It is not available under "History" and none of the available installs appear to be for Mac OS X (Version 10.7.4). S
View 2 Replies View RelatedI have PSE9 and a macbook pro 10.9. I lost the original DVD that came with my purchase of PSE. Some files must have gotten corrupted because I can't open the program without reintalling. It says, "Some of the application components are missing from the application directory. Please reinstall the application." I have the serial number and all and I registered the product. Is there somewhere I can download a new copy to install?
View 7 Replies View Relatedat photoshop cs6 extended downloaded in july, i now get the following message: "some of the application components are missing from the application directory. please reinstall the application."
View 2 Replies View RelatedWhen I loaded some photo actions into my new PSE11 it show only a generic icon in the effects palette, not the icon from the maker so it takes extra time to search for the action I need. How can I get the icon from the maker to show as the icon in the palette?
View 3 Replies View RelatedI need to convert a PNG image to an icon in Windows icon format.Can I do that in XDP7?
View 9 Replies View Relatedwhy does the update icon always stay on the photoshop 10 icon on my desktop?
View 3 Replies View RelatedIn the Default.ivb I have created a function that creates a new panel and adds some buttons in the panel.
I see the panel and the buttons, but nothing happens when I click on them.
The documentation says that in order to listen to the events of my buttons I should declare a "Private WithEvents ButDef As ButtonDefinition", but it when I try I get an error message "Only valid in object module"
Another question, still related to the events, I would expect to find a _StartUp event where I should run my function, but I can't find that event.
I want to create plug-in that customize most top useful UI, menu command or options to the Ribbon for the Autocad 2014 using vb.net 2010/12
View 1 Replies View RelatedI would like to add or customize my multifunction grips. For example, at a pline vertex the m-f grip allows me to stretch, add, or remove it. One thing I'ld like to add is to break the pline at that vertex. It would be faster to use m-f grips than the pull-down menu item I have.
View 1 Replies View RelatedI would love to be able to customize Inventor 2013's user interface to make it look more like the older version of Inventor. You can do that with AutoCad Mechanical. You simply change the view to "AutoCad classis" and those annoying "panel bars" go away and you get a pull down screen.
View 9 Replies View RelatedI use Quick Properties in static mode mostly for counting objects and quickly seeing the length of lines and polylines. These lengths are listed in feet and inches. Would it be possible to add an additional length item to the quick properties menu which shows the inches/decimal length? Would be awesome as I wouldn't then have to do the math to convert to inches.
View 3 Replies View RelatedIn AutoCAD 11 the right click pop-up has clipboard and an arraow you need to slide on to get to the copy, paste, paste as block, copy with base point...Older versions had these clip board features in the pop-up and I hate having one more step to get to the clipboard features. Is there way to customize what shows up with right click?
View 3 Replies View RelatedI created my own workspace from Map Classic Workspace and created my Toolbars (like in 2011).My new Workspace is default and current yet every time I open Map 3d 2012 I still get Express ribbon.
I already closed every ribbon in Customize User Interface and saved again but then I get this message: The Ribbon does not have any tabs or panels currently loaded. When I choose My workspace even if it is already default, ribbon disappears.
way to customize iProperties in order to meet our companies B.O.M. standards. We need to be able to show, item quantity, part number, description, material spec, length in inches, and total of length x qty and weights x qty. We would like to set up iProperties so that when we input the values for each property our BOM will be completed, is this possible?
View 1 Replies View RelatedWhere can I find a good document on how to customize the interface in AutoCAD 2012?I need to add an extra menu, palettes , custom text sizes...etc
View 3 Replies View RelatedI have just updated to 2013 LT. I want to customize my toolbars to match my old set up but once I've spent ages moving tools to new folders and arranging them how I like it, I close Autocad then open it again and it reverts back to default so all that time editing folders etc is wasted!!
View 2 Replies View RelatedI am trying to figure out how / if you can customize the contents of panels or what is always displayed. For example, I would like to add or show the draw order buttons because I use them frequently. So far, the only way I can get it displayed is to add it to the Quick Access Toolbar or go to Tools>Toolbars>AutoCAD>Draw Order and then place it near my ribbon.
View 4 Replies View RelatedIs there is any way of customizing the thickness of edges. I want to customize this... I am using Autodesk v2012
View 4 Replies View RelatedThe cross section at the culdesac is not coming right (attached). Instead of a gradual slope, i get a drop near the centerline. I am targeting to the CL alignment and profile.
View 3 Replies View Related