I have noticed on several drawings that the multileaders change themselves when the drawing is closed and opened again. I put the multileaders in, they look fine, and when I close and open the drawing the multileader has extended itself across my text. If I edit it it fixes itself but it 'breaks' itself again once I close and open.
View 2 RepliesI'm looking for a way to convert leader and text that is separate into a multileader where the text is attached to the leader. We just updated to new standards using the multileader and all the old stuff is not attached.
I'm using AutoCad 2009.
I don't normally deal with multileaders with text although a drawing I have has been done with these.
The leader is justified to the left of the text. If I drag the position of the leader head to the right hand side of the text, the leader still starts from the left hand side of the text (goes at the bottom of the text) so how would I justify the leader position of a multileader to the right hand side of the text?
I had a quick look in the properties pane earlier although am fairly busy and it is only a trivial issue.
Ok, I'm sure there is a very simple way to fix this that I just haven't yet discovered. When I insert a stacked dimension in the top line of my leader text, the spacing gets automatically adjusted for the hight of the stacked dimension and it adjusts the leader line up so that it actually passes through my top line. Can this be avoided? I have attached a picture for reference.
View 4 Replies View RelatedI'm snapping to the corners of my multileader text boxes. OSNAPNODELEGACY is set to 1 and I'm not snapping to regular text or mtext. How can I change this behavior for the multileader text?
View 6 Replies View RelatedI am just wondering how is possible to set up a Multileader style that creates text with a background mask.
I have been trying to get this feature in the Multileader style manager and I could not find it in order to avoid to set up background mask every time I create a Multileader
Actually We are trying AutoCAD 2010 and i have a question about multileader i cannot find in the manual.we are used to set a bright background mask under our text (including Mtext, Qleader, Dimensions) this way the printed text can be seen much better in dark area.
Now i'm am upgrading from AutoCAD 2007 and discovering Multileader (and i cannot find the Qleader button on the ribbon) so i conclude the new "standard is multileader", this is annoying because i cannot find anywhere how to put text mask background inside text in mleader. any option available? i would like to begin to use this function, but the text background is mandatory here.
I have recently converted mtext to multileader text & i thought it was causing some issues but now im not so sure. Some of my users are experiencing a long time to regen & it has caused some peoples computers to freeze up. Is there a setting or a variable that could be causing this? I am not sure if this is an issue with the multileaders or with autocad release 13 or 14 in general. I had the users turn regenauto off until i can find a solution.
View 3 Replies View Related(Again) The “leader” of the “dimension text” disappears when the text is moved! Why?
I’m wondering why the “leader” of the “dimension text” disappears when the text is moved.
How can I control this setting?
I need to show this “leader” all the time. Is that possible?
Please, have a look on the screenshots below (the file is attached).
I have turned off or unchecked "Extend leader to text" (Multileader Style > Modify > Content > Extend leader to text) in all my templates.
Yet, when I start a new drawing using those templates, that feature is turned on (checked) again.
I've tested this several times. Yes, I'm using the same templates I've been saving. I've even created a new template from scratch with none of our standards in it. The check for Extend leader to text keeps returning.
I've tried this in both AutoCAD and Civil 3d.
Any way to duplicate this?
[URL].....
I am currently using AutoCAD 2011LT. When I add a leader sometimes the text appears fine and sometime the text appear to go bold, I tried retyping the text but it appears to be luck of the draw as to when it happens. I don't have a problem with this showing up on the screen but it transfer to prints on both paper and PDF.
View 2 Replies View RelatedI have dragged station offset and multileaders next to each other in the drawing. Everything is set to go on the same layer. I am using named (stb) plot styles. The layer's lineweight is set to .25mm. However, I usually make the leaders be lighter in weight - .13mm. I am using text borders on both of these objects.
I can't get both the text and border to be the same in both objects unless I set everything to Bylayer. Given that I want lightweight leaders, and heavier text, this is unnacceptable.
It seems that the StaOff label style text and border weight in DRAGGED state are controlled by one lineweight setting.
In a multi leader, the text weight is always, apparently, Bylayer, and the text border is controlled by the lineweight set for the leader.
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
My text style height is set to 1/8, however my leader text height is 3/16. How do I change the leader text height? T
View 6 Replies View RelatedI would like to add a Leader Text to lable a part- referencing the Part Number or whatever, move the text close to the edge of the part, to remove the leader/arrow and make the txt rotate 90deg to be vertical. I have messed with style settings for a new Vertical Txt style, and Vert Dim style -(pointed to the Vert Txt style and adjusted Notes and Leaders tab)
i don't understand why in the Format Text window the "rotation" box is always grayed out. can you unlock it?
How to have “circular” shape for the frame of leader text?
I wanted to have circular shape for the text of the leader and wondering if such option might be exist.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
MA.JPG
why i can't not match properties (MP) multileader texts, as you can see on the pic, i want the Mleader text on the right to be the same size as on the left, they are in the same layer, same mleader style but when click MP to match with the one on the left, nothing happen?
Is there anyway to prevent AutoCAD from converting a MTEXT leader with a block element attached to a BLOCK leader when doing a copy/paste? See screen shot.
2012-04-05 3-09-00 PM.jpg
Apart from FLATTEN, is there a way to change the Z coordinates of an MLEADER to stop the text from appearing bold.
FLATTEN explodes the MLEADER & is thus not suitable for this.
Autocad2010 there is a blue triangle preceding layer name in property box on some layers as shown on attached image. Sometimes these layers are turned on when viewing paperspace, sometimes they do not show up.
View 3 Replies View RelatedIs there anyway to save a multileaderstyle so that I don´t have to create it every time I open a new drawing?
View 3 Replies View RelatedI noticed that some multileader move when editing and some do not. This is very frustrating. Usually this seems to happened when annotative scale is on. I tried to avoid this happening by turning off annotative scale and this does not work. Instead I go to another file to find the other multileader text that doesn't move when I edit. I tried to find what causing this shift in the properties menu but can't see the difference between the two.
How to stop the multileader shifting!? Is this a bug?
in general, I add my multileaders in paperspace after I have set my model space scale. However, I am now bound to that scale! That is, ML in paperspace really only have one scale: 1-1, right? For example, I wanted to zoom in to a part of my project (ie, reduced my scale by a 1/3) and all my ML we pointing erroniously into space.
Just so I undestand, if one anticipates changing the scale of a drawing mid-project, the ML should be made annotative, and placed in model space?
I am using autocad lt 2010..I am labeling items in my drawings and the text looks different in some of the leaders. When i check the properties both leaders have all the same properties that i feel are relevant.
View 9 Replies View RelatedThe multileader arrow is not showing even if the number is increased (ie from "4" to "10") in the multileader dialog box or under the properties when modified.
View 2 Replies View RelatedSee attached file.
I have this special type of callout, which is not easy to draft, but it looks pretty in plans. Is there any easy way to convert this to multileader?
Usually, I create it as block, insert it and change location of solid arrow around textbox. If I want to relocate this callout, Its not that easy as like multileader. I have to move solid arrow around textframe (from one corner to other) to point the same location. can this be done automatically (like mleader?)
I have used v2006 til recently. Now I use LT 2010. I just use multileaders for arrows. I am starting at the arrow head, and I want the tail to end on the "endpoint" of a line. When I "right click" to finish the command, the tail of the arrow "jumps off" the endpoint or nearest or whatever snap point I use. I have looked in the settings and turned all the text & landings off & set break size to zero.
View 2 Replies View RelatedWhen we copy multileadered items from one viewport to another the leaders do not show up, but the text does.
View 3 Replies View RelatedI would like to try and set up a Multileader that reads the description of a block.
For example when I am making the block I would like to put some descriptive text that may say "Post top insert connected to haboe pin"
After the block is compelted and placed into a new drawing I would then select the multi leader option and then it would automtically fill in the text. (from the pre-defined description)
I would like it to be similar to a callout in solidworks.
I was under the impression that you could search mult ileader text with quick select, but 'contents' or some variant does not seem to be an option.
Tell me the easiest way to find a multileader with specific text (including the wildcard)? I expect it can be done with quick select or filter but can't get it happening.
I have multiple closed areas that i want to show the sq ft. Now i use the command multileader then click to insert a feild.
Select object then area. Now i have a leader with text. Can i extract the text to a table or spreadsheet. Or approach this differently. I use autocad lt 12
I am trying to circle one of the letters and each will receive a number sequence afterwards for the comm addresses (is what I want to do anyway). This is a gov project so I have to ensure everything is addressed properly.
Circling the prefix would make this look ideal but I don't know if there's a way to do it. I tried looking but couldn't find a way to do it.
The only way I could think to do it is do it manually with attdef and create a defined block with the prefix area already circled.