I'm snapping to the corners of my multileader text boxes. OSNAPNODELEGACY is set to 1 and I'm not snapping to regular text or mtext. How can I change this behavior for the multileader text?
View 6 RepliesI have noticed on several drawings that the multileaders change themselves when the drawing is closed and opened again. I put the multileaders in, they look fine, and when I close and open the drawing the multileader has extended itself across my text. If I edit it it fixes itself but it 'breaks' itself again once I close and open.
View 2 Replies View RelatedI am just wondering how is possible to set up a Multileader style that creates text with a background mask.
I have been trying to get this feature in the Multileader style manager and I could not find it in order to avoid to set up background mask every time I create a Multileader
Actually We are trying AutoCAD 2010 and i have a question about multileader i cannot find in the manual.we are used to set a bright background mask under our text (including Mtext, Qleader, Dimensions) this way the printed text can be seen much better in dark area.
Now i'm am upgrading from AutoCAD 2007 and discovering Multileader (and i cannot find the Qleader button on the ribbon) so i conclude the new "standard is multileader", this is annoying because i cannot find anywhere how to put text mask background inside text in mleader. any option available? i would like to begin to use this function, but the text background is mandatory here.
I have recently converted mtext to multileader text & i thought it was causing some issues but now im not so sure. Some of my users are experiencing a long time to regen & it has caused some peoples computers to freeze up. Is there a setting or a variable that could be causing this? I am not sure if this is an issue with the multileaders or with autocad release 13 or 14 in general. I had the users turn regenauto off until i can find a solution.
View 3 Replies View RelatedMA.JPG
why i can't not match properties (MP) multileader texts, as you can see on the pic, i want the Mleader text on the right to be the same size as on the left, they are in the same layer, same mleader style but when click MP to match with the one on the left, nothing happen?
Apart from FLATTEN, is there a way to change the Z coordinates of an MLEADER to stop the text from appearing bold.
FLATTEN explodes the MLEADER & is thus not suitable for this.
I'm working out some bugs that have cropped up now that I've upgraded to 2011. For starters, I can't seem to be able to snap to existing dimension lines like I used to, even though I have almost all of my snap types activated.
View 5 Replies View RelatedWe detail an extensive amount of 3D solid entities using viewports in layout tabs. Most of detailing entities are in model space, things like dimensions, part callout, and other text entities that provide description as to what's going on in the viewport. Periodically, there is a need to create entities in paper space. Lets say for example, I'm zoomed out to the layout of the page setup, and I have a viewport with a lot of 3D solid entities. Still zoomed out now, I want to add an icon to the corner of the viewport. When I invoke the "endpoint" osnap to insert my icon at the viewport's, without zooming in, and try to pick a corner of the viewport, the icon gets inserted to an endpoint of an entity that's in model space. What a pain in the behind. The only real work-around is to zoom right into the corner of the viewport, which defeats the whole point of osnaps in the first place.
I remember this not being the case. Did AutoCAD introduce a variable and set it's default to something that I don't it to be, or is this a screw-up of AutoCAD?
Autocad2010 there is a blue triangle preceding layer name in property box on some layers as shown on attached image. Sometimes these layers are turned on when viewing paperspace, sometimes they do not show up.
View 3 Replies View RelatedIs there anyway to save a multileaderstyle so that I don´t have to create it every time I open a new drawing?
View 3 Replies View RelatedI noticed that some multileader move when editing and some do not. This is very frustrating. Usually this seems to happened when annotative scale is on. I tried to avoid this happening by turning off annotative scale and this does not work. Instead I go to another file to find the other multileader text that doesn't move when I edit. I tried to find what causing this shift in the properties menu but can't see the difference between the two.
How to stop the multileader shifting!? Is this a bug?
in general, I add my multileaders in paperspace after I have set my model space scale. However, I am now bound to that scale! That is, ML in paperspace really only have one scale: 1-1, right? For example, I wanted to zoom in to a part of my project (ie, reduced my scale by a 1/3) and all my ML we pointing erroniously into space.
Just so I undestand, if one anticipates changing the scale of a drawing mid-project, the ML should be made annotative, and placed in model space?
Since I installed 2010, I noticed that OSNAP seems to want to snap to objects in model space that are outside of the viewport while I am in paper space. It seems to only happen with polygonal viewports.
View 7 Replies View RelatedI am using autocad lt 2010..I am labeling items in my drawings and the text looks different in some of the leaders. When i check the properties both leaders have all the same properties that i feel are relevant.
View 9 Replies View RelatedThe multileader arrow is not showing even if the number is increased (ie from "4" to "10") in the multileader dialog box or under the properties when modified.
View 2 Replies View RelatedSee attached file.
I have this special type of callout, which is not easy to draft, but it looks pretty in plans. Is there any easy way to convert this to multileader?
Usually, I create it as block, insert it and change location of solid arrow around textbox. If I want to relocate this callout, Its not that easy as like multileader. I have to move solid arrow around textframe (from one corner to other) to point the same location. can this be done automatically (like mleader?)
I have used v2006 til recently. Now I use LT 2010. I just use multileaders for arrows. I am starting at the arrow head, and I want the tail to end on the "endpoint" of a line. When I "right click" to finish the command, the tail of the arrow "jumps off" the endpoint or nearest or whatever snap point I use. I have looked in the settings and turned all the text & landings off & set break size to zero.
View 2 Replies View RelatedWhen we copy multileadered items from one viewport to another the leaders do not show up, but the text does.
View 3 Replies View RelatedI would like to try and set up a Multileader that reads the description of a block.
For example when I am making the block I would like to put some descriptive text that may say "Post top insert connected to haboe pin"
After the block is compelted and placed into a new drawing I would then select the multi leader option and then it would automtically fill in the text. (from the pre-defined description)
I would like it to be similar to a callout in solidworks.
I was under the impression that you could search mult ileader text with quick select, but 'contents' or some variant does not seem to be an option.
Tell me the easiest way to find a multileader with specific text (including the wildcard)? I expect it can be done with quick select or filter but can't get it happening.
I have multiple closed areas that i want to show the sq ft. Now i use the command multileader then click to insert a feild.
Select object then area. Now i have a leader with text. Can i extract the text to a table or spreadsheet. Or approach this differently. I use autocad lt 12
I am trying to circle one of the letters and each will receive a number sequence afterwards for the comm addresses (is what I want to do anyway). This is a gov project so I have to ensure everything is addressed properly.
Circling the prefix would make this look ideal but I don't know if there's a way to do it. I tried looking but couldn't find a way to do it.
The only way I could think to do it is do it manually with attdef and create a defined block with the prefix area already circled.
I'm fairly new to AutoCAD, and most certainly to the forum [URL]......
I have a question in regards to using Multileader text. Tolerance.jpg
The guy who used to work here made this text with a tolerance to a radius measurement. The tolerance is smaller ( no problem with that), but also adjusted to the top of the line.
When using grips to move a multileader source block with the attachment defined as insertion point (the insertion point being the center of the source block) the grip point moves off of the block if the move is to the left of the multileaders end point. When the drawing is reopened the blocks move from where they were placed to the off insertion point grips. A screen shots jpg and a drawing file are attached
View 2 Replies View RelatedI have a drawing with exsisting multileaders in it.
I am trying to apply the match properties to a newly created multileader but it isn't working.
I have a dwg template that has a Multileader Style that uses Annotative text. When I changed a viewport to a different scale....from 1"=1' to 3/4" =1', the text is not appearing to scale. It's very large. The Mtext changed to the correct scale but not the Multileader text. Where do I need to make a change?
View 5 Replies View RelatedI'm looking for a way to convert leader and text that is separate into a multileader where the text is attached to the leader. We just updated to new standards using the multileader and all the old stuff is not attached.
I'm using AutoCad 2009.
When I try to create a multileader the text size is throwing me off. I draw the arrowhead location and landing with no problem, then the text box pops up. As I am typing the text into the textbox it shows up on the screen as if it was a text height of about 5, however it is actually 0.18. As soon as I click off the text box to complete the multileader the text shrinks down to the actual size of 0.18.
I want the height to be 5 but when I change it to 5 the text box shows up as huge, like it is about 200 or something even though it is actual 5. The textbox takes up most of the screen, as soon as I click of the text box to complete the multileader it shows up as a normal height of 5 and looks correct. This is so annoying. Multileader is the only tool that does this. A simple multiline text box works fine; as I am entering the text it is the same size the entire time, visually and actually.
I'm using the Multileader Align tool for my labels and it works great as long as my labels are left justified. I noticed this issue has been brought up before but didn't know a way to make it work for right justified text.
My problem is this: right justified text will not justify properly. It will not justify the same way that left justified text does. If you can follow this, leaders that have text that are left-justified will align according to their leader lines and everything looks neat and correct. The leaders that are right justified do not align properly because they align to the left side of the text. See the following screen shots and you'll understand...
Incorrectly justified leaders.
Correctly justified leaders
Using Autocad 2014 and would like away to put a vertical line at the text where the leader meets it. Is this a setting that I'm missing or might there be a Lisp routine to get it? See the attached jpeg.
View 6 Replies View Related