AutoCAD 2010 :: Autosave And Multileader Text In 2013 And 2014?
Dec 3, 2013
I have recently converted mtext to multileader text & i thought it was causing some issues but now im not so sure. Some of my users are experiencing a long time to regen & it has caused some peoples computers to freeze up. Is there a setting or a variable that could be causing this? I am not sure if this is an issue with the multileaders or with autocad release 13 or 14 in general. I had the users turn regenauto off until i can find a solution.
I'm snapping to the corners of my multileader text boxes. OSNAPNODELEGACY is set to 1 and I'm not snapping to regular text or mtext. How can I change this behavior for the multileader text?
I have noticed on several drawings that the multileaders change themselves when the drawing is closed and opened again. I put the multileaders in, they look fine, and when I close and open the drawing the multileader has extended itself across my text. If I edit it it fixes itself but it 'breaks' itself again once I close and open.
I am just wondering how is possible to set up a Multileader style that creates text with a background mask.
I have been trying to get this feature in the Multileader style manager and I could not find it in order to avoid to set up background mask every time I create a Multileader
Actually We are trying AutoCAD 2010 and i have a question about multileader i cannot find in the manual.we are used to set a bright background mask under our text (including Mtext, Qleader, Dimensions) this way the printed text can be seen much better in dark area.
Now i'm am upgrading from AutoCAD 2007 and discovering Multileader (and i cannot find the Qleader button on the ribbon) so i conclude the new "standard is multileader", this is annoying because i cannot find anywhere how to put text mask background inside text in mleader. any option available? i would like to begin to use this function, but the text background is mandatory here.
Using Autocad 2014 and would like away to put a vertical line at the text where the leader meets it. Is this a setting that I'm missing or might there be a Lisp routine to get it? See the attached jpeg.
I have drawings that are saved as ACad 2010 and need to work on them in ACad 2014. I am receiving error messages saying the drawing is damaged and requires recovery. Errors are being detected and some files I can eventually open but edits are missing. Others I am unable to open and I get a message "audit could not correct errors in database".
why i can't not match properties (MP) multileader texts, as you can see on the pic, i want the Mleader text on the right to be the same size as on the left, they are in the same layer, same mleader style but when click MP to match with the one on the left, nothing happen?
I have a small office and 2 of the associates are using autocad lt 2014 1 is using 2013 and I am using 2007. Up until a few months ago we were all on 2007.
Now when I open drawings from the 2007 version, I cannot see some of the text. I have tried the following: Checking layers to make sure they are onChecking font to make sure they are availabemaking sure annonotation is visiblemaking sure proxy graphics are onMaking a block of just the drawing objects and opening that I am not that familiar with 2014, so I cannot figure out what is happening. Note - when i look at the drawing in the preview window, I can see the text. But when I open it, it is not there. If I save in 2014, the text no longer shows up in the preview.
We are having an issue with AutoSave we have it setup to save to a certain fold every 10min and it isnt' saving to the fold. It used to save just fine and all of a sudden stopped.
Sometimes when Autocad autosaves my dwg's, one of the dwg's replaces the other one. So I end up with two identical dwg's with different filename.
e.g.
Lets say I have two dwg's up at the same time, called "Car.dwg" and "House.dwg".
Sometimes when the autosave is finished it ends up with a car on both of the dwg, and the one that previously had a House drawing on it, is now a car with "House.dwg" filename.
why i can set my autosave and autosave location and for the day it will stay on but sometime during the week it will uncheck by itself. could it be from a update?
I've been using Autocad 2014 for several months now, and I've noticed that every couple days or so it turns off my autosave. I can check the box to enable it, and set it to 10 minutes, and a couple days later it will be unchecked and say 0 minutes in the box. I don't know how often it happens, I know it takes more than one day, but it's really annoying and one of those things I usually only find AFTER I have a drawing crash on me.
Processor: AMD A6-5400K APU (with Radeon HD Graphics) - 3.60 GHz RAM: 8.00 GB System: 64-bit OS: Windows 8 Version: AutoCAD 2004 LT Second, what we do.
Commercial MEP design. Project in mention is a 65,000 sq.ft. Italian food market.
Third, the problem.I am experiencing a selection and double click editing problem with AutoCAD 2012LT & AutoCAD 2014LT. On Friday, June 28th we recieved updated (not new) backgrounds from a lighting designer for two floors of the building whose MEP system we are engineering. The second floor had no problems really; we reset some annotation scales and the updated backgrounds plugged right in. The first floor, however, was so messed up that we copied and pasted the track lights and all else into our file directly (vs. xref'ing) and instantly, after a save, it is impossible to evoke any kind of edit with double click. In order for us to modify anything, we have to type the command before editing. So if I want to DDEDIT, I have to type that in before changing the text. If I do select the text first than CAD freezes, takes a huge dump, wipes for 5 minutes, and then the text editor appears. This problem is ubiquitous with all 2012 LT machines and up. AutoCAD 2005 LT has no problem (lmfao).
I have the text style set to match text orientation to layout and it works, but when I use the same text style in mulitleader the text doesn't rotate with the layout 2013 Civil 3D
I have some new multi leader definitions using blocks, however I can only edit the attribute definition text individually, where if I had the same block as a standalone with a leader I could select as many blocks as I wanted and change the text via quick properties in one quick step. Is there a way to achieve this using a block as a base for a multileader?
Is there a way to set the Multileader scale for DIMSCALE when it is on the tool palette like you are able to do with every other block? Maybe a lisp routine so set the Multileader style and to dimscale?
Autocad2010 there is a blue triangle preceding layer name in property box on some layers as shown on attached image. Sometimes these layers are turned on when viewing paperspace, sometimes they do not show up.
I noticed that some multileader move when editing and some do not. This is very frustrating. Usually this seems to happened when annotative scale is on. I tried to avoid this happening by turning off annotative scale and this does not work. Instead I go to another file to find the other multileader text that doesn't move when I edit. I tried to find what causing this shift in the properties menu but can't see the difference between the two.
How to stop the multileader shifting!? Is this a bug?
in general, I add my multileaders in paperspace after I have set my model space scale. However, I am now bound to that scale! That is, ML in paperspace really only have one scale: 1-1, right? For example, I wanted to zoom in to a part of my project (ie, reduced my scale by a 1/3) and all my ML we pointing erroniously into space.
Just so I undestand, if one anticipates changing the scale of a drawing mid-project, the ML should be made annotative, and placed in model space?
I created a Multileader style in AutoCAD LT 2011 that duplicated our Architectural firms standards from previous versions. Pretty simple. The problem is, when utilized using AutoCAD LT 2012, AutoCAD LT 2013, AutoCAD 2012, or AutoCAD 2013, a small dot appears in the keynote bubble. (it also plots) Workarounds include checking “Automatically include landing” and/or changing “Content – Insertion point” to “Content – Center Extents”, in the “Modify Multileader Styles” dialogue. Both unacceptable per our office standards. Tough being 2 versions of AutoCAD behind office wide, because of such a minor bug but our keynoting has looked the same since 1992 and I really thought it would have been fixed since posting after the release of 2012.
Attached is a .dwg or you can follow these instructions. Start a new drawing, go in to “Annotate”, Click “Leaders”, hit “new”. Name it whatever you like, I’ve named mine “Test”. Under “Leader Structure”, uncheck “Automatically include landing”. Under “Content” change “Multileader type:” to “Block”, “Source block” to “Circle”(this setting can be set to anything), and “Attachment:” to “insertion point”. Hit “O.K.”, highlight your newly created Multileader style, hit “Set Current”, and close out. Test your new multileader style and notice the dot.
I am using autocad lt 2010..I am labeling items in my drawings and the text looks different in some of the leaders. When i check the properties both leaders have all the same properties that i feel are relevant.
The multileader arrow is not showing even if the number is increased (ie from "4" to "10") in the multileader dialog box or under the properties when modified.