AutoCAD LT :: 2007 Text Disappears In 2013 And 2014?
Nov 14, 2013
I have a small office and 2 of the associates are using autocad lt 2014 1 is using 2013 and I am using 2007. Up until a few months ago we were all on 2007.
Now when I open drawings from the 2007 version, I cannot see some of the text. I have tried the following: Checking layers to make sure they are onChecking font to make sure they are availabemaking sure annonotation is visiblemaking sure proxy graphics are onMaking a block of just the drawing objects and opening that I am not that familiar with 2014, so I cannot figure out what is happening. Note - when i look at the drawing in the preview window, I can see the text. But when I open it, it is not there. If I save in 2014, the text no longer shows up in the preview.
View 7 Replies
ADVERTISEMENT
Jul 6, 2013
i wish to migrate all default icons of AutoCAD2007 to AutoCAD2014: i' ll wish to overwrrite default icons of 2014 with icons 2007
i know that i can do this with cui save every icon in a bmp file and sustitute every icon of 2014 with bmp file of 2007....
but i think it s so boring and long to do...
does it exist any faster mode?
P.S. i tried to export in a cui file all default toolbar of 2007: ii opened it in 2014... but icons are 2014 default!
same file cui opened in 2007 and 2014 has different icons images
View 6 Replies
View Related
Jul 29, 2013
Upon selecting anything in 90% of any drawings the crosshairs disappear and CAD2014 freezes for 2sec.
It's a Dell Presicion T1600, Xeon 3.4Ghz, 16GB RAM, Quadro2000 with a 120GB SSD as the primary running CAD2014 premium.
It started recently.
This happens even if I toggle HW acceleration. We draft mainly in model view with the 2D Wireframe style.
View 6 Replies
View Related
May 19, 2012
In 2013, when I place a balloon, or drag an existing one around, the text inside the balloon either disappears or gets mundged. My hardware setting is on "Performance". I tried it on "Compatability" as well with the same results.
[URl]
Graphics card supports both DX10/OpenGL. Worked fine for 2011 and 2012.
View 3 Replies
View Related
Dec 3, 2013
I have recently converted mtext to multileader text & i thought it was causing some issues but now im not so sure. Some of my users are experiencing a long time to regen & it has caused some peoples computers to freeze up. Is there a setting or a variable that could be causing this? I am not sure if this is an issue with the multileaders or with autocad release 13 or 14 in general. I had the users turn regenauto off until i can find a solution.
View 3 Replies
View Related
Jul 2, 2013
First, MY specs.
Processor: AMD A6-5400K APU (with Radeon HD Graphics) - 3.60 GHz
RAM: 8.00 GB
System: 64-bit
OS: Windows 8
Version: AutoCAD 2004 LT
Second, what we do.
Commercial MEP design. Project in mention is a 65,000 sq.ft. Italian food market.
Third, the problem.I am experiencing a selection and double click editing problem with AutoCAD 2012LT & AutoCAD 2014LT. On Friday, June 28th we recieved updated (not new) backgrounds from a lighting designer for two floors of the building whose MEP system we are engineering. The second floor had no problems really; we reset some annotation scales and the updated backgrounds plugged right in. The first floor, however, was so messed up that we copied and pasted the track lights and all else into our file directly (vs. xref'ing) and instantly, after a save, it is impossible to evoke any kind of edit with double click. In order for us to modify anything, we have to type the command before editing. So if I want to DDEDIT, I have to type that in before changing the text. If I do select the text first than CAD freezes, takes a huge dump, wipes for 5 minutes, and then the text editor appears. This problem is ubiquitous with all 2012 LT machines and up. AutoCAD 2005 LT has no problem (lmfao).
View 5 Replies
View Related
Jan 22, 2013
The file are created in AutoCAD 2007.It is a drawing with 2D and 3D drawing in it.When I open this file in my AutoCAD2013 and make the recovery as AutoCAD suggest.
The are no 3D left in the drawing. The file are working fine and whiteout no plebes I AutoCAD2007
System:
Autodesk Product Design Suite Ultimate 2013
AutoCAD Mechanical 2013
View 2 Replies
View Related
Mar 26, 2013
My place of work recently changed from Autocad 2007 to Autocad 2013 (big jump.. i know), when we try to plot old drawings the .ctb files that were used in 2007 now says missing beside it. We also only have a few options in regards to .ctb files, whereas in older versions we had hundreds to choose from. Any function to get our old .ctb files back or where to download them?
View 1 Replies
View Related
Apr 8, 2013
I'm using Cad and i'm trying to get a floorplan drawing into Lightscape 2007. The CAD drawing appears fine when loaded into Lightscape 2012, but because of the project we have to use Lightscape 2007. Unfortunately only parts of the floorplan appear when loaded into Lightscape 2007, I've played around with layers, I've saved it as the earliest version of CAD that I can and nothing works. How to load a CAD drawing into Lightscape 2007?
View 1 Replies
View Related
Oct 19, 2012
I just completed my first topo using Civil3D 2013 (yay!) and now I want to send it to a client. However, when I save it as an ACAD 2007 file and go to open it using ACAD 2007 the spot elevations and all text and symbols associated with them disappear. I can't imagine that you have to have Civil3D to view a Civil3D file. Is there something I can do here?
I did not create a survey database with these points, just imported the .txt file from the field.
View 1 Replies
View Related
Oct 2, 2012
i don't know how to add text to autocad drawings. i'm using autocad 2007
View 9 Replies
View Related
Feb 13, 2012
(Again) The “leader” of the “dimension text” disappears when the text is moved! Why?
I’m wondering why the “leader” of the “dimension text” disappears when the text is moved.
How can I control this setting?
I need to show this “leader” all the time. Is that possible?
Please, have a look on the screenshots below (the file is attached).
View 1 Replies
View Related
Jul 1, 2013
I have been migrating dozens and dozens of .pat files from one version of AutoCAD to the next for many, many versions. Most recently in AutoCAD 2013 the .pat files were stored in the C:Program FilesAutodeskAutoCAD 2013SupportPatterns - worked fine. During the migration to 2014 I received an install error report stating that this subdirectory did not exist and could not be created. Alternately it stated that the new default path C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupport will be used instead.
At first I created the Patterns subdirectory where it could not be done automatically. No luck. Then I placed the Patterns subdirectory in C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupportPatterns and no luck.
View 5 Replies
View Related
Apr 5, 2013
When the senior engineer at our company opens my acad drawings all of the text justification is off.
I'm using acad 2009 mech and saving as to 2007.
He is using 2007 LT?
View 5 Replies
View Related
Dec 20, 2013
Happens every year. Upgrade and spend half a day or more trying to get everything back to the way I had it. All I have is a couple small toolbars for commands that are several clicks deep in the ribbons and I want them "right there" all the time.
I thought Autodesk 360 might be a good tool for this. All it did was DOWNLOAD some old settings and destroy one of the toolbars I'd created. They really need an override in there to specify upload, download, overwrite or don't.
I'm trying to migrate (I guess that's the technical term) my settings from 2013 Mechanical to 2014 Mechanical. It's probably too late already, after 360 did its deal, but I really want to get this down so we don't go through it every year anymore.
I maintain that PTC had this part of it down Pro/ENGINEER. You had a config file that was editable plain text.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
View 9 Replies
View Related
Mar 5, 2013
I have a drawing xrefing another drawing which has the ecw attached to it - if I change the UCS the ecw disappears.
So the image only shows when the ucs is set to WUCS - I should also note that just the image disappears I can still see the image frame.
View 6 Replies
View Related
Aug 27, 2012
When using Autocad 2013, the minimize, maximize, and close buttons on the right side of the title bar frequently disappears. I can make it reappear by selecting the drawing name under the window tab.
View 1 Replies
View Related
Mar 13, 2013
This has been occurring numerous time more than it should. While in a drawing mid command, panning, typing anything pretty much my cad freezes. The rest of my computer is fine everything works properly but CAD is frozen and when i bring my pointer into the program it disappears. I can even open cad up again and the old CAD will stay open. It shows the drawings i have open on the tab bar and i can’t close out of them. I have a computer that’s more than capable to work properly.
View 1 Replies
View Related
May 24, 2012
I use object grouping for several different things in AutoCAD. With the release of ACAD 2013 I occasionally get the following message upon opening a drawing:
Associative Network Evaluation Error
The object cannot be resolved or value limit has been exceeded.
Inconsistent associative objects my display geometry and grips incorrectly and update in unexpected ways when edited. You can undo to restore the associative object to its previous state.Upon receiving this message, all groups have been removed from the drawing.
View 9 Replies
View Related
May 3, 2012
All of a sudden my cursor will become invisible. This happens only with AutoCAD. and if I switch between drawing windows it will appear on another drawing file. I have to close the drawing and open it again and then the cursor will be back only to disappear again. The cursor is visible if I move it back to the ribbon or bottom controls. It seems to happen only when it becomes the cross-hair cursor. I can still make selection windows and right click.
Mouse is working fine with all other programs and drivers are up-to-date.
View 9 Replies
View Related
Sep 6, 2012
When I edit my text it disappears. I have attached an image of the problem. This only affects my machine in my company - I have checked colour settings with others and theirs are the same as mine only theirs works
The text is set to white/black colour 7 and the sheet layout is set to white. I have tried different text colours and I still can't see them.
As you can see from the top image I have a background mask that is set to the drawing sheet colour which is white When I double click in the text to edit it the text disappears (bottom image) as if the mask is appearing in front of the text which it shouldn't do.
The only way to be able to view the text is to switch the background mask off - but I want to avoid this as I have to keep switching it on again.
I get the same problem if inserting a new table and having to edit the cells. However here there is no way to switch the background mask off as there is no button that I can see to switch it on and off.
View 2 Replies
View Related
Aug 9, 2013
I have a library of blocks that I built for our company to use. We recently upgraded from 2013 to 2014 and boy did it throw our library for a loop!
There is a check box (reflectivity) that leaves the materials black when the drawing shade mode is changed to Realistic (unless you go in and uncheck the reflectivity box) and while I have figured out how to alleviate that issue (by unchecking it on our tempate and saving it) I am still having a materials issue with our blocks.
I can open the block (and turn on Realistic mode) and all the pieces have their materials like they should. I then open a new drawing and insert the same block into the drawing .. one piece is sans material.
I cannot for the life of me figure out why it's there on one drawing but it gone when inserted. The new drawing has been purged and doens't contain anything it shouldn't.
[URL]
View 2 Replies
View Related
Nov 15, 2012
I have created an attribute say 1 and made a circle and moved the attribute text next to the circle and now making a block including both text and circle but when the block is created the text disappears I have made sure to check the annotation on in both attribute and block creation. This is just happening in Autocad Map 3D 2012. Dont know why the text disappears but when i explode the block it is back.
View 9 Replies
View Related
Dec 5, 2012
why the text and leaders placed over viewports (in paperspace) keeps disappearing? The text is still there...just not visible. i can select the text with no problem. and if i move it off of the viewport then i can see it just fine. this is happening with all the viewports in my drawings... on all tabs. If i close the drawing and reopen then all the text appears again.....but when i switch tabs then come back...the text vanishes again.
View 2 Replies
View Related
Feb 22, 2012
I created some tables in the attached AutoCAD Map 3D 2011 drawing by copying and pasting cells from an Excel 2007 workbook.
I have been able to update the tables in AutoCAD and print without any problems. However, when a second user opened the drawing, the table text was missing (the lines were present).
Note: We are saving our files in AutoCAD 2010 format for compatibility with some LT users.
View 2 Replies
View Related
May 13, 2013
In my AutoCAD 2014, after selecting a grip on an object or a point it will snap to other grip points even when osnap is turned off. Is there a command or variable to turn what appears to be an auto grip snap function off?
View 8 Replies
View Related
Apr 6, 2013
I'm a student at lone star college in houston, and I'm working on a set of piping plans in autocad 2013. I just downloaded a student version of autocad 2014. I wanted to know if I can work on my plans in both the 2013 and 2014 versions without any hiccups or issues.
View 6 Replies
View Related
Jun 18, 2013
I am having problems opening an idw created in the 2013 version on my inventor professional 2014.
The idw contains its own template, views, dimensions, details and cuts.
Upon opening in 2014 to release details of the scale is changed randomly and the views are out of the leaf.
View 1 Replies
View Related
Jun 11, 2013
i made some 3d modelling in autocad 2014 in the 3d drawing mode but i have some difficulty in modifying the dimensions of the subobjects.
1 method that i already know is to use the scale gizmo which works but not much as i am not able to set the exact dimensions i need. it only scales the subobject according to the previous size.
modify and determine the exact dimensions of the sub-objects.
View 4 Replies
View Related
Oct 3, 2013
each attempt to save as or publish / plot to DWF in Autocad 2014 fails (Device not found) other than the device what am i missing?
tried from the Output tab on the ribbon as well as the application icon save as , publish, and plot all with the same result
View 4 Replies
View Related
Mar 28, 2013
I just installed AutoCAD 2014, but it's not pulling my custom .pgp file, even though the folder that file is in is first in my support path.
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
View 7 Replies
View Related
