AutoCAD 2013 :: Freeze And Cursor Disappears?
Mar 13, 2013
This has been occurring numerous time more than it should. While in a drawing mid command, panning, typing anything pretty much my cad freezes. The rest of my computer is fine everything works properly but CAD is frozen and when i bring my pointer into the program it disappears. I can even open cad up again and the old CAD will stay open. It shows the drawings i have open on the tab bar and i can’t close out of them. I have a computer that’s more than capable to work properly.
View 1 Replies
ADVERTISEMENT
Dec 3, 2012
Everything works fine until the center of my cursor passes over a 3d solid, the cursor then disappears, the spinning circle icon spins for sometimes minutes, and the display greys over, and I cannot click 'ESC' or Ctrl + C to abort this cycling. I have to wait, sometimes 30 secs, sometimes 2 minutes for it to stop freezing and the screen returns to normal.
As I work in 3d solids a lot, this makes Acad 2013 unusable to me. Acad 2007 was not an issue with this problem I still have it installed as I have to revert back to 2007 to do anything with 3d solids in it.
View 4 Replies
View Related
May 3, 2012
All of a sudden my cursor will become invisible. This happens only with AutoCAD. and if I switch between drawing windows it will appear on another drawing file. I have to close the drawing and open it again and then the cursor will be back only to disappear again. The cursor is visible if I move it back to the ribbon or bottom controls. It seems to happen only when it becomes the cross-hair cursor. I can still make selection windows and right click.
Mouse is working fine with all other programs and drivers are up-to-date.
View 9 Replies
View Related
Jul 23, 2009
I have several drawings that some times, after selecting several objects to move, and pressing space-bar to end selection, the cursor disappears. If I click for a base-point the cursor comes back but it is not where I need it for accurate placement.
I have developed a work around - I cancel command after blind pick, restart command, type P to select previous, then space-bar, then I can place accurately with cursor visible for both placement picks.
Autocad 2009, XP
View 9 Replies
View Related
Oct 3, 2012
At no specific time when using ACAD 2012 MEP the cursor disappears. cross hairs and all. the only way to get them back is to close ACAD and open it back up.
View 4 Replies
View Related
Apr 27, 2013
When I use various sliders to adjust values of modifiers, I will sometimes push the mouse up or down until the cursor wraps around the screen, sometimes multiple times, depending on how much the values are being adjusted.
After adjusting the value, when the cursor has gone off the view of the monitor, it will not return for a minute or longer.
View 2 Replies
View Related
Jan 29, 2013
CS6 Photoshop. Why does brush cursor disappear under 20 pixels?
View 2 Replies
View Related
Sep 12, 2012
I have a problem in Photoshop CS5 (v. 12.0.2) after ugrading my Mac system to Mountain Lion 10.8.1. I use a mouse (not wireless, also tried changing mouse).
When I work with a picture using the brush tool and move the cursor to a palette or menu, the layers palette for example, the cursor disappers. Sometimes you can see that the palettes gets "marked" when you move the mouse around (I mean the "buttons" that changes when you move the cursor over them).
But the cursor is gone and I can't see where to click. If I just click around and eventually hit the right spot, a layer for example, the cursor usually comes back. But the problem happens again as soon as I move the cursor from my picture to a palette or menu.
I don't use that many different tools in Photoshop, usually just the brush tool. But the same thing happens with the doodge tool (or any other tool I think)}.
View 3 Replies
View Related
Dec 3, 2008
I have a frustrating problem in CS3 that when writing a block of text, either with text tool or area text tool, that the cursor disappears. I need to see its new position after using the space bar or tab: ready to input the next piece of text.
It seems to be flashing some of the time if I click into the middle of the text block, but disappears where I want to continue it at the bottom of the text block?
View 4 Replies
View Related
Feb 7, 2014
When I am working on an image, for some reason SOMETIMES, the cursor vanishes and all I will see is different elements momentarily highlighting but not enough to do anything in LR. pressing ESC gets me out of the module and somehow I have to exit the program...restart to get it back to normal again...
View 13 Replies
View Related
Sep 16, 2013
When I am working on an image, for some reason SOMETIMES, the cursor vanishes and all I will see is different elements momentarily highlighting but not enough to do anything in LR. pressing ESC gets me out of the module and somehow I have to exit the program...restart to get it back to normal again...
View 1 Replies
View Related
Sep 20, 2012
I am having problems using the publish command in Autocad 2013. The command works fine in 2010. I am able to plot normally in 2013. As you can see from the attached screenshots my settings are the same in both versions. The command freezes up during plotting of the second drawing in any group.
View 4 Replies
View Related
Oct 11, 2013
I'm using Autocad 2013, and im trying to freeze layers in certain viewports, but the VP freeze/thaw button is greyed out for all my layers and wont allow me to freeze anything. I dont want to use the New viewport freeze/thaw button.
View 1 Replies
View Related
Nov 14, 2013
When would i use the on/off option in layers over using freeze?
View 3 Replies
View Related
Feb 28, 2013
Every time I try to hatch a larger area, my AutoCAD 2013 program freezes and I need to close the program and restart it, losing anything I hadn't saved prior to the freeze. In addition, certain areas won't hatch because the program is telling me I have open boundaries which is not the case.
View 3 Replies
View Related
Mar 26, 2013
I have installed AutoCAD 2013 student on my Laptop (Win7 32Bit) and want to work now.
But I have the problem that my Menubar always freezes / becomes instabil.
-> When I open ACAD, the menu bar is by default on "Home", when I click on the tab "Insert", the tools of "insert" aren't visible, there are still the tools from "Home" shown (Line, Polyline, Circle etc.)
But when I click on these wrong shown tools, the tools of "Insert" become active. (Only the 'surface' doesn't react)
Well, I see always the Home-tools. All the other tools aren't displayed to me, but they work (if u know where they are, you can guess and click and hope you hit the right one )
View 7 Replies
View Related
Jan 6, 2014
How to freeze a specific layer inside a block within the viewport?
View 3 Replies
View Related
Aug 16, 2012
The problem is when I select a solid, autocad freezes for about a minute. After that minute, I can execute a command. During that minute of inactivity, I can use anyother program or part of windows normally with no apparent degradation. If I click in an autocad window, toolbar,etc, all the open autocad windows cloud over and the cursor turns to a spinning cursor. Outside of an autocad window the cursor is normal. This is how it works in the noun/verb process, grip editing. However, if a command is issued first, then the selection of solids is instantaneous. The solid(s) are appropriately highlighted and everything proceeds normally in the verb noun approach.
I have played with a variety of suggested performance settings in windows and in autocad. I have updated the graphics drivers so I always have the latest version. I have a quadro fx 3700, 16gb ram, and 2.5 tb of disc space.
View 6 Replies
View Related
Mar 6, 2013
Windows 8
Autocad 2013 64bit service packed
Every time I use the drop down menu to select unit to save OR open a file, it freezes and then all the programbecomes not responding (have to force close from windows utility).
View 6 Replies
View Related
Oct 22, 2013
Can you freeze text objects on the same layer in one viewport but have it still appear on the other viewport without having two separate layers.
View 3 Replies
View Related
May 8, 2013
In previous versions of Autocad 2008 and earlier you could start a new drawing xref in a drawing then switch to layout and create a viewport that would show the xref. Then you could click inside that viewport and run the FL (freeze layer) command and selectively freeze layers by clicking on them.
In my current version of Autocad Civil 3D 2010, when I follow the same steps as above and run the FL (freeze layer) command inside the viewport, the entire layer contents within the viewport freeze as if everything is on that one layer.
I notice that if I pull up the layer manager box and go down the list of xref'd layers and select the freeze in viewport option for each of the layers I need to freeze it will do what I need to have done, But I'd like to be able to be able to selectively freeze these layers visually within the viewport like I've always been able to do, instead scrolling down a long list of layer names and freezing them that way.
how to do this in Civil 3D 2010?
View 4 Replies
View Related
Mar 5, 2013
I have a drawing xrefing another drawing which has the ecw attached to it - if I change the UCS the ecw disappears.
So the image only shows when the ucs is set to WUCS - I should also note that just the image disappears I can still see the image frame.
View 6 Replies
View Related
Aug 27, 2012
When using Autocad 2013, the minimize, maximize, and close buttons on the right side of the title bar frequently disappears. I can make it reappear by selecting the drawing name under the window tab.
View 1 Replies
View Related
May 24, 2012
I use object grouping for several different things in AutoCAD. With the release of ACAD 2013 I occasionally get the following message upon opening a drawing:
Associative Network Evaluation Error
The object cannot be resolved or value limit has been exceeded.
Inconsistent associative objects my display geometry and grips incorrectly and update in unexpected ways when edited. You can undo to restore the associative object to its previous state.Upon receiving this message, all groups have been removed from the drawing.
View 9 Replies
View Related
Nov 14, 2013
I have a small office and 2 of the associates are using autocad lt 2014 1 is using 2013 and I am using 2007. Up until a few months ago we were all on 2007.
Now when I open drawings from the 2007 version, I cannot see some of the text. I have tried the following: Checking layers to make sure they are onChecking font to make sure they are availabemaking sure annonotation is visiblemaking sure proxy graphics are onMaking a block of just the drawing objects and opening that I am not that familiar with 2014, so I cannot figure out what is happening. Note - when i look at the drawing in the preview window, I can see the text. But when I open it, it is not there. If I save in 2014, the text no longer shows up in the preview.
View 7 Replies
View Related
May 19, 2012
In 2013, when I place a balloon, or drag an existing one around, the text inside the balloon either disappears or gets mundged. My hardware setting is on "Performance". I tried it on "Compatability" as well with the same results.
[URl]
Graphics card supports both DX10/OpenGL. Worked fine for 2011 and 2012.
View 3 Replies
View Related
Jul 29, 2013
Upon selecting anything in 90% of any drawings the crosshairs disappear and CAD2014 freezes for 2sec.
It's a Dell Presicion T1600, Xeon 3.4Ghz, 16GB RAM, Quadro2000 with a 120GB SSD as the primary running CAD2014 premium.
It started recently.
This happens even if I toggle HW acceleration. We draft mainly in model view with the 2D Wireframe style.
View 6 Replies
View Related
Aug 9, 2013
I have a library of blocks that I built for our company to use. We recently upgraded from 2013 to 2014 and boy did it throw our library for a loop!
There is a check box (reflectivity) that leaves the materials black when the drawing shade mode is changed to Realistic (unless you go in and uncheck the reflectivity box) and while I have figured out how to alleviate that issue (by unchecking it on our tempate and saving it) I am still having a materials issue with our blocks.
I can open the block (and turn on Realistic mode) and all the pieces have their materials like they should. I then open a new drawing and insert the same block into the drawing .. one piece is sans material.
I cannot for the life of me figure out why it's there on one drawing but it gone when inserted. The new drawing has been purged and doens't contain anything it shouldn't.
[URL]
View 2 Replies
View Related
Jan 16, 2013
So I was working in 3D and I guess I pressed some kind of button or something that caused my 3D cursor to only move along the x=0 line. If I move my cursor up, it moves it lightly sideways. It stops when I move into side/top/front views, but as soon as I pan into 3D view, the cursor only appears along the x-axis. I'm probably overlooking a simple AutoCAD command, but I'm a new user and I can't find the answer anywhere in the manual or on the internet.
View 1 Replies
View Related
Jun 19, 2013
I am running a new full version of AutoCAD 2014 on Windows 7 64 bit. It is litterally taking 5-7 seconds to zoom, switch pages, regen, or mostly anything else.
View 6 Replies
View Related
Sep 20, 2013
I noticed that when I hover the mouse over a object, two small blue squares appear and when I pick an object, a properties dialog box appears. This started happening suddenly without changing any settings or options. How do I turn this off/on?
View 2 Replies
View Related
